• The cast iron modified by re offers refined microstructure in which the carbides become blocky or granular, thus increasing the mechanical properties.

    经稀土变质处理的铸铁组织细化,其碳化物呈团块状或颗粒状,从而提高了力学性能。

    youdao

  • Its microstructure is fine pearlite and carbides.

    金相组织是细珠光体和碳化物。

    youdao

  • Lamellar carbides are not formed during aging process.

    层状碳化物不是时效过程中的产物。

    youdao

  • The recrystallization of DZ40M alloy was also influenced by the carbides.

    DZ40 M合金中的碳化物是影响合金再结晶行为的重要因素。

    youdao

  • The action of the residual carbides during the spheroidizing annealing was discussed.

    讨论了残留碳化物在球化过程中的作用。

    youdao

  • Only strip austenite substructure and stacking fault were observed around the carbides.

    在碳化物颗粒附近只观察到奥氏体变体和层错。

    youdao

  • It is very important to make out suitable sintering technology for ultra fine cemented carbides.

    因此,针对超细硬质合金特点制定合适的烧结工艺在生产超细硬质合金中是至关重要的。

    youdao

  • The sub surface were deformed pearlite, the flake carbides were broken, and the hardness increased.

    次表面为变形的片状珠光体组织,片状碳化物发生碎化,硬度也有一定的提高。

    youdao

  • All these changes are due to the change of carbide morphology and precipitation of granular carbides.

    这些变化是由于碳化物形状的改变和粒状碳化物的析出所致。

    youdao

  • This paper deals with the granular carbides formation from hot deformation in high chromium cast steel.

    本文探讨了热变形高铬铸钢中颗粒状碳化物的形成。

    youdao

  • When the transition metal content increases, the carbon cage can break up and metal carbides are formed.

    当金属含量较高时,这种碳笼结构的金属富勒烯化合物转变为金属碳化物。

    youdao

  • The lower dislocation density in bainite is unfavourable for the aggregation and coarsening of carbides.

    贝氏体中位错密度较低,不利于合金碳化物的聚集粗化。

    youdao

  • The sizes and kinds of carbides and their distribution are mainly dependent on the tempering temperature.

    碳化物的形态、种类、分布主要取决于回火温度。

    youdao

  • It is showed that type and morphology of eutectic carbides can be controlled by combining alloyed elements.

    结果表明,共晶碳化物的类型和形态能通过合金成分组合控制。

    youdao

  • The fine structure of bainite and the morphology and distribution of carbides in steels were investigated with TEM.

    使用TEM研究了钢中贝氏体的精细结构及碳化物的形貌与分布,加入微量元素使贝氏体铁素体组织明显细化。

    youdao

  • The results show that both shape and number of residual carbides are two key parameters affecting the spheroidization.

    结果表明,残留碳化物形貌和数目是影响球化的两个关键因素。

    youdao

  • The extra vanadium exists in austenite as coarse vanadium enriched carbides or in bainite as vanadium carbide particles.

    一部分钒以含钒碳化物的形式呈块状存在于奥氏体中或呈颗粒状分布在贝氏体基体中。

    youdao

  • The exceptional tool performance of sintered carbides results from their very high hardness and high compressive strength.

    硬质合金材料的出色之处来源于它们非常高的硬度和耐压强度。

    youdao

  • Description is made of the injection moulding and its application for the powdered refractory metals and cemented carbides.

    介绍了国外难熔金属和硬质合金粉末注射成形技术及其应用。

    youdao

  • Therein, both retained austenite decomposition and carbides precipitation were the key factors in the cryo-treating process.

    其中残余奥氏体的分解和微细碳化物的析出是关键因素。

    youdao

  • Results showed that sinter-HIP treatment can enhance the transverse rupture strength of WC-Co cemented carbides effectively.

    结果表明:低压烧结工艺可以有效提高硬质合金的抗弯强度;

    youdao

  • The crystal grain growth inhibitor and it's inhibiting mechanism in super fine cemented carbides are summarized in this paper.

    本文综述了近几年超细硬质合金中晶粒生长抑制剂及其机理的研究概况。

    youdao

  • The change in lattice parameter of secondary carbides caused by high alloying does not result in any new orientation relationship.

    合金碳化物晶格常数的变化未导致新的取向关系。

    youdao

  • Eutectic phases of phosphorus aggravate the netting of carbides and result in the decreases to compact toughness and wear resistance.

    认为磷共晶加剧了碳化物的网状分布,降低了冲击韧性及耐磨性。

    youdao

  • The influences of temperature and soaking time of such treatment and the alloy compositions on spheroidization of carbides were studied.

    本试验研究了球化热处理的加热温度、保温时间及合金化学成分对于碳化物团球化的影响。

    youdao

  • The amount of carbides depends on deformed temperature and microstructure of austenite at thermally deformed at the deformed temperature.

    碳化物的析出量主要由形变温度和该形变温度下热变形奥氏体的组织状态决定。

    youdao

  • The secondary carbides have a strong influence on recrystallization rate by retarding the migration of recrystallization grain boundaries.

    退火过程中析出的二次碳化物阻碍再结晶晶界的迁移,从而影响再结晶层的界面推移速率。

    youdao

  • The results show that only vanadium carbides form at the low carbon content, and Cr and Mo element mainly dissolves into vanadium carbides.

    结果表明:碳含量较低时,仅形成钒的碳化物,铬、钼元素主要固溶于钒的碳化物中。

    youdao

  • Different morphologies of carbides and different matrixes have been obtained by heat treating the medium chromium cast iron in different ways.

    通过对中铬铸铁进行不同的热处理,得到不同的碳化物形貌和基体。

    youdao

  • Different morphologies of carbides and different matrixes have been obtained by heat treating the medium chromium cast iron in different ways.

    通过对中铬铸铁进行不同的热处理,得到不同的碳化物形貌和基体。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定