By the glow of a small carbide lamp one could distinguish a dozen human figures gathered around three or four tables.
借着电石灯的光亮，可以看到十几个人体聚集在三四张桌子的周围。
We have an enquiry for silicon carbide and would like to ask you to send us your offer for 1000 metric tons for shipment during September.
我们得到一个碳化硅的询盘，请你报我1000公吨9月交货。
This requires a trick opposite to the first one-suddenly making an insulator into a conductor. The insulator in question is silicon carbide.
其关键技术与第一个恰好相反，它是将绝缘体迅速转为导体，其中所用的绝缘体是金刚砂。
By contrast, IBM grew its graphene transistors on a silicon-carbide wafer, and then added an insulating layer which prevents short circuits in the transistors.
相比之下，IBM将石墨烯晶体管植入矽-碳晶圆上，然后涂上绝缘层以防止晶体管短路。
The strips were later removed from the solution and heated in an oven. The heat changes the cotton fibers into carbon fibers, which react with the boron solution and produce boron carbide.
在高温烘烤过程中，棉纤维变成了碳纤维，后者再与硼溶液发生反应生成碳化硼。
The orifices of this nozzle are almost chocked up with carbide.
这个油嘴的喷孔几乎被碳化物堵死。
The comprehensive utilization of carbide slurry was introduced.
重点介绍了电石泥的综合利用情况。
The microstructure of surfacing metal is lath martensite and carbide.
堆焊层显微组织为低碳马氏体和碳化物。
The effective measures are presented bo avoid zonal segregation of carbide.
提出了避免碳化物带状偏析的有效措施。
The fabrication process and application of silicon carbide mirror are presented.
综述了碳化硅反射镜材料常用制备方法的特点。
Design and application of carbide slag in propylene oxide production were summarized.
总结了电石渣生产环氧丙烷工艺中的设计与应用。
Research of the surface modification for two kinds of silicon carbide mirror in common use.
两种常用碳化硅反射镜基底表面改性的研究。
A solid solution of ferric carbide or carbon in iron; cools to form pearlite or marten site.
含铁碳化物或含碳铁的固体溶体，冷却可形成珠光体或马氏体。
The cemented carbide composite consists of cemented carbide matrix and cemented carbide particles.
一种由硬质合金基体和硬质合金粒子制成的硬质合金复合材料。
All these changes are due to the change of carbide morphology and precipitation of granular carbides.
这些变化是由于碳化物形状的改变和粒状碳化物的析出所致。
Cemented carbide indexable inserts chip-breaking groove is the most prevalent method to control chips.
采用硬质合金可转位刀片断屑槽进行断屑是目前应用最广泛的一种断屑方法。
Harder and more brittle than black silicon carbide, very sharp for grinding and of good heat conductivity.
硬度和脆性较黑碳化硅高、磨粒锋利、导热性好。
In this paper, the distribution and existent morphology of rare earths in cemented carbide have been studied.
研究了稀土元素在硬质合金中的分布和存在形态。
Welcome friends to visit Ningxia Hua Co. , Ltd. silicon carbide can visit, guidance and business negotiation.
欢迎各界朋友莅临宁夏华能碳化硅制品有限公司参观、指导和业务洽谈。
To describe the property, preparation, application, actuality and development trends of silicon carbide technology.
介绍了碳化硅纤维的性能、制备、应用及其现状与发展趋势。
ALLOY steel: a steel containing iron and carbide plus one or more other metals such as nickel, chromium, or molybdenum.
合金钢：指钢中含有铁，碳，以及镍、铬、钼等一种或多种其他的合金元素。
A method of joining green state with carbide and silicon carbide was applied to join reaction-bonded silicon carbide (RBSC) ceramics.
以碳化硅和碳为糊料的主要原料，采用素坯连接的方法焊接反应烧结碳化硅(RBSC)陶瓷。
Other materials affected by Tuesday's ruling include fluorspar, magnesium, manganese, silicon carbide, silicon metal and yellow phosphorus.
受周二裁定影响的其他原材料还有萤石、镁、锰、碳化硅、金属硅和黄磷。
Composite electrodeposits of nickel-cobalt-tungsten carbide were prepared by adding tungsten carbide particles in the nickel-cobalt alloy solution.
研究了在镍钴合金镀液中加入碳化钨微粒形成镍-钴-碳化钨复合镀层的共沉积过程。
Zirconium carbide, ZrC, is an important high temperature structural material with very high melting point, excellent strength and good corrosion resistance.
碳化锆是一种重要的高熔点、高强度和耐腐蚀的高温结构材料。
The measurement of density and hardness of carbide tips is one of effective method to judge the real compositions of carbide tip and index of performance quality.
实测硬质合金刀片的密度和硬度值是一种判断刀片成分真实含量和性能质量指标的有效方法之一。
Mechanical seal with tungsten carbide hard wear-resistant, with durable, wear-resistant characteristics, can pump more than 8000 hours of continuous operation safe.
机械密封采用硬质耐磨碳化钨，具有耐用、耐磨等特点，可以使泵安全连续运行8000小时以上。
The existence of uneven carbide belts is the inner reason of fracture failure and the stress accumulation during the process of cold extruding is its external incentives.
模具组织中存在不均匀带状分布的碳化物是产生断裂失效的内在原因，而模具在冷挤压成型过程中形成的应力积累是导致模具断裂失效的外在诱因。
The existence of uneven carbide belts is the inner reason of fracture failure and the stress accumulation during the process of cold extruding is its external incentives.
模具组织中存在不均匀带状分布的碳化物是产生断裂失效的内在原因，而模具在冷挤压成型过程中形成的应力积累是导致模具断裂失效的外在诱因。
应用推荐