The results indicate that the two factors, which are very important during operation of blast furnace and manufacturing of cooling stave, highly influence cooling capacity of cooling stave.
结果表明：这两个因素对冷却壁的性能都具有很大的影响，在高炉操作和冷却壁的设计制造中必须重视。
Failure of the cooling systems allowed pressure to build up beyond the design capacity of the reactors.
冷却系统的失效使压力升高，超过反应堆的设计能力。
They require a certain amount of electricity to run, but for large servers or storage devices, they would also require cooling capacity to run efficiently.
IT设备需要电能才能运行，但对于大型的服务器或存储设备，它们还需要冷却设备才能高效运行。
Also, passing supply air through the floor void improves the cooling capacity of both ceiling and floor.
同样，通过地板间层空间提供通风可以同时提高地板和下层天花板的冷却能力。
The result shows that there is no difference in thermal properties between cast copper stave and rolled copper stave. The cooling capacity of cast one is very good.
热态试验结果表明，铸铜冷却壁与轧制铜冷却壁在热态性能上没有大的区别，冷却能力很好，壁体与埋管间没有气隙热阻。
By measuring the cooling curve and quench severity of quenching oil at various flow rates, the relationship among the hardening capacity, quench severity and flow rate was established.
对淬火油在不同流速下的冷却曲线和淬火烈度进行了测量，建立了硬化能力、淬火烈度与介质流速三者之间的关系。
The fifth step, according to the input parameters of the cooling capacity, modify the relevant data in the computer.
第五步，根据制冷量输入工作参数，修改电脑中的相关数据。
As effective capacity of Zinc production exceeds design capacity, the cooling capacity of Zinc electrolyte is clearly insufficient.
由于锌的实际产能超过设计能力，使锌电解的冷却能力明显不足。
With increasing of nitrogen pressure, the cooling capacity of nitrogen, the cooling velocity and hardness of the workpieces after quenching are improved.
随着氮气压力的提高，气体的冷却能力、工件的冷却速度、工件淬火后的硬度等都得到了不同程度的提高。
With the development of large scale hydropower station and the increase of installed capacity of generating unit, the evaporation cooling has been applied widely.
随着大型水电站的开发建设和单机容量的增大，蒸发冷却将得到广泛的应用。
It has the advantages of improving both the draft inducing capacity and cooling efficiency of the cooling tower and reducing the emission concentration and manufacturing and operation cost.
该工艺具有提高冷却塔的抽风能力，提高冷却塔冷却效率，降低污染物排放浓度，降低工程造价和运行费用等优点。
Some suggestions on the selection of motor capacity and cooling methods, determination of synchronous and asynchronous motors, as well as insulation systems are given.
对电机容量选择、冷却方式、感应电机及同步电机型式选择、绝缘系统等提出了看法。
The results show that cooling capacity of the unit drops dramatically as the supply water temperature rises, and also drops as the supply air rate decreases.
实验结果表明，被测机组的供冷量随供水温度升高而迅速下降，随送风量减少而下降。
The result shows that production of high strength screw bars is reasonable by the control rolling and control cooling process on high-speed wire mill with the capacity of low temperature rolling.
结果表明，在具有低温轧制能力的高线轧机生产线上，采用控轧控冷工艺生产高强度钢筋是可行的。
The key of it is to achieve more quick solidification speed, namely approves the cooling capacity of the system as possible.
快速铸轧的关键是实现快速凝固，即最大限度提高铸轧系统的导热能力。
The capacity production of fluidized bed roaster is mainly influenced by the clinker of cooling-jacket and the concentration of oxygen-enriched air blast .
冷却水套结渣和富氧浓度是影响锌精矿沸腾焙烧炉生产能力的重要因素。
The thermodynamic model of laser medium was established to study the thermodynamic characteristic in laser medium cooling of heat capacity laser.
为了研究热容激光器冷却过程中激光介质的热力学特性，建立了激光介质热力学理论模型。
Single cooling loop and double cooling loop HIMOD flagship series of precision air conditioning, the refrigeration capacity is from 20kw to 103kw for a single unit which can be combined together.
生产的单制冷回路和双制冷回路HIMOD系列旗舰型系列精密空调，可以提供单机的制冷量为20KW至103kw，并可组合在一起。
Presents two calculating method of total cooling capacity and sensible cooling capacity by a theoretical analysis, namely the efficiency method and the condition transformation method.
通过理论分析提出了风机盘管全冷量和显冷量的两种计算方法：效率法和工况转换法。
The experimental results show that discharge temperature and specific power of compressor are influenced by oil-injected flow and oil cooling capacity.
实验结果表明，压缩机排气温度和比功率受到喷油量和油冷却量的影响。
The continuous and stability of cooling capacity output is a key property for an adsorption refrigeration system to be used in the field of air conditioning.
冷量输出的连续性和稳定性是吸附制冷技术能否用于空调领域的关键。
The characteristics of evaporative cooling technology as well as multifunction testing stand of large-capacity are described in this paper.
本文对蒸发冷却技术的特点及多功能大容量蒸发冷却试验台进行了比较详细的论述。
The capacity production of fluidized bed roaster is mainly influenced by the clinker of cooling-jacket and the concentration of oxygen-enriched air blast.
冷却水套结渣和富氧是影响锌精矿沸腾焙烧炉生产能力的重要因素。
Upon selection of cooling tower, the structure and dimensions of cooling tower shall be checked against site installation conditions. The floor's supporting capacity should also be checked.
冷却塔选定之后，需复核所选冷却塔的结构尺寸是否适合现场安装条件，并核算楼板承受能力。
This coefficient was used to solve the heat transfer between the melt and cooling water, namely the heat transfer capacity of the mold.
该系数用于解决金属和冷却水之间的传热，即反映结晶器的传热能力。
The inappropriate treatment of cooling water would cause the increase of energy loss per refrigeration capacity, even the cut off the refrigerator.
指出了冷却水处理不当会造成单位制冷量能耗增大，甚至造成制冷机停机；
Low oil level will result in an increase of condensation on the surface of cooling coil, the mixture of condensation and liquid will deteriorate the liquid and decrease the cooling capacity.
当油位低于盘管时，盘管的表面将有结露的水混入液体中，造成液体变质，同时冷却能力也会下降。
Low oil level will result in an increase of condensation on the surface of cooling coil, the mixture of condensation and liquid will deteriorate the liquid and decrease the cooling capacity.
当油位低于盘管时，盘管的表面将有结露的水混入液体中，造成液体变质，同时冷却能力也会下降。
应用推荐