For a typical assembly stress problem, digital simulation is conducted by means of the hybrid method with different numerical calculation methods.
针对一个典型的装配应力问题，运用不同的数值计算方法，对混合求解法进行了数值模拟。
When the deformation method was used for concrete stress calculation, it was assumed that the stress increased suddenly at each stage, and such an assumption led to certain errors.
采用变形法计算混凝土应力时，假设应力在各个时段内以突变形式增加，并对这种假设带来的误差进行了分析。
Based on the constraint matrix method developed by Japanese scholars, a generalized constraint matrix method was proposed for calculation of the temperature stress of RCCDs.
在日本学者提出的约束矩阵法的基础上，提出了用来计算碾压混凝土坝温度应力的广义约束矩阵法。
Through the calculation of the finite element method(FEM) models for double circular arc profile spiral bevel gear, the stress changing pattern along the length of the tooth is obtained.
用有限元方法，对双圆弧弧齿锥齿轮沿齿长方向齿根应力进行了计算。通过应力计算结果的分析，得出了凸、凹两齿侧应力沿齿长的分布规律。
A calculation method is proposed to determine the crack tip stress intensity factors for sections on the basis of zonal generalized variational principles.
本文应用分区广义变分原理，提出了求解含有裂纹的型材应力强度因子的计算方法。
This article presents an analysis of the contact stress of rolls in two-cross-roll straightener and gives a method for the calculation.
在实践的基础上对二辊矫直机辊面接触应力的计算进行了理论分析，给出了辊面接触应力的计算方法。
In this paper, we study theoretically infinitesimal element method for calculation of stress birefringence in polarization maintaining fibers.
本文研究了计算保偏光纤中应力双折射特性的微元算法，对其计算值进行了理论验证。
In this paper a right formula of laterad stress was derived by the direct method, and at same time a formula of the vertical strain for calculation was also derived.
本文用直接法导出侧向应力的正确公式，同时还导出了竖向应变的计算公式。
Study method is to adopt ANSYS-international large-scale general-purpose finite element software to realize the simulation calculation of the RCC thermal stress for Aggregate linear expansion.
在研究方法上采用国际大型通用有限元软件ANSYS建模来实现混凝土骨料线膨胀对碾压混凝土温度应力的仿真计算。
Finite element analysis method is an effective method for calculating thermal stress, but the temperature parameters for calculation have no uniform standard.
有限元是计算温度应力的很好方法，但是对于计算中所需的温度参数取值并没有统一的标准。
This paper describes the calculation method and process of stress amplitude and stress amplitude spectrum to evaluate the safety life time of steel structure for tower crane.
本文介绍了塔式起重机钢结构安全寿命评估中的应力幅及应力幅谱系数的计算方法和过程。
For assessing reliability of a pressure piping containing defects, it is necessary to know the calculation method and the distributions of flow stress of material.
确定管道流变应力的不确定性分布是对含缺陷压力管道进行可靠性评定的前提。
According to the principle of effective stress, this paper puts forward the theoretical basis for determining foundation's bearing capacity, presents the rational calculation method.
根据有效应力原理，提出了确定地基承载力的理论依据，给出了合理的计算方法。
Based upon the principle of effective stress a method of 2-d dynamic analysis for the calculation of the seismic response of saturated soil mass is submitted in this paper.
本文根据有效应力原理提出了一个计算饱和土体地震反应的二维动力分析方法。
The treatment method for stress suspended conductor in static electric field and its application in stress distribution calculation of MOA is presented.
介绍了静电场中电位悬浮导体的处理方法以及它们在氧化锌避雷器电位分布计算中的应用情况，并分析了各种方法的优劣。
Our 3D BEM(Boundary Element Method) calculation shows that the larger the notch width is, the bigger the error makes for the dimensionless stress intensity factor.
通过三维边界元计算分析表明，切槽宽度越大，无量纲应力强度因子的标定值就越大；
This formula gives a theoretical basis for the calculation of applied load in bar stress severing method.
该公式为应力断料时的预荷力计算提供了理论依据。
Calculation of brake bottom of drum brake by use finite element method for stress. according to calculating result, studied that stress is distributed over brake bottom.
对汽车鼓式双向自增力式制动器底板进行了有限元计算，在此基础上对制动器底板的应力分布进行了分析研究。
The calculation code including manifold method (MM) and finite element method (FEM) is developed to study the non-simultaneous coupling problem of stress-strain and seepage for discontinuous material.
提出了一个用流形元与有限元的变形和渗流非同步耦合的分析方法，用于模拟不连续块体在水压作用下的变形过程。
A coupling calculation method for welding stress was developed by ABAQUS code. The residual stress for welded joint of P91 steel was simulated by the method above.
本文基于大型有限元软件ABAQUS，开发了一个顺次耦合的焊接应力计算程序，对P 91钢焊接接头的残余应力场进行了模拟。
The result shows that the Finite Element Analysis is an effective method for stress and displacement analysis, which should be used to replace the traditional Two-Time Calculation met…
分析计算结果表明，有限元法是进行叶轮应力和变形分析以及对叶轮进行改型设计的有效手段。
In order to avoid the difficulty and expensive measurement of transient temperature field, a method for maximal stress and strain cycle calculation using residue stress is proposed.
提出了一种避开瞬态温度场测试而通过残余应力计算得到最大应力应变循环的方法。
The consolidation deformation can be calculated by new method. The superiority of new method is confirmed by model parameters test and stress-strain calculation for Shuangjiangkou dam.
通过双江口堆石坝掺砾黏土心墙试验与计算，并与现有的总应力法计算结果比较，验证该总应力法算法的可行性。
On this basis, checking to the tubing axial deformation, load and stress calculation method of the former, provide the basis for pipe strings design and a reasonable choice of production parameters.
在此基础上，分析管柱载荷、应力及轴向变形，为井下管柱的合理设计提供依据。
A computation program has been developed, using a two dimension boundary element method, for calculation of stress strength factor at the welding crackle tip.
反映裂纹尖端附近区域应力场强度的物理量称为应力强度因子。它和裂纹大小、形状以及外应力有关。
Through finite element method calculation, we analyse the stress and stability of the bank spillway concrete structure in bad conditions for the dam of Yanzhangxi (1) Water Power Station in Longquan.
通过有限元计算，分析龙泉市岩樟溪一级电站拦河坝在最不利工况时对岸坡溢洪道结构的应力和稳定的影响。
Through finite element method calculation, we analyse the stress and stability of the bank spillway concrete structure in bad conditions for the dam of Yanzhangxi (1) Water Power Station in Longquan.
通过有限元计算，分析龙泉市岩樟溪一级电站拦河坝在最不利工况时对岸坡溢洪道结构的应力和稳定的影响。
应用推荐