The concept and idea of reliability of system has been accepted in the design and analysis of building structures, but its calculation is a difficult point all the while.
在建筑结构的设计与分析中，结构体系可靠度的概念和思想已日益为人们所接受，但它的计算却一直是一个难点问题。
The analysis and calculation of analog system show that it has good dynamic characteristic.
对模拟调节系统的分析计算表明，它具有良好的动态品质。
This paper analyzes the sources of effecting the error of the accuracy in electrohydraulic position servo system, and carries out quantitative analysis and calculation to main factors.
本文从工程实际出发，分析了影响电液位置伺服系统精度误差的来源，并对各主要因素作了定量的分析计算。
The calculation design system for magnet & magnetic field is a kind of special calculation and analysis software.
磁场计算与磁体设计系统，是一种用于计算永磁体空间磁场分布的专业软件。
The precision centrifuge dynamic balancing system is composed of data acquisition, data analysis and disposal, imbalance calculation and executive part.
精密离心机动平衡系统由数据采集、数据分析处理、不平衡量的解算、执行部分等组成。
Through KASS analysis calculation, acquire the transformation rule of front wheel location parameter and steering error of McPherson suspension and steering system.
通过KASS程序分析计算，得出麦弗逊悬架和转向系统的前轮定位参数及转向误差的变换规律。
We describe in detail the influence of the main parameters on all the performances in the system through the analysis and calculation of main design parameters of the pump.
这里通过对该泵的一些主要设计参数的分析及计算，详细地阐述了各参数在系统中对各项性能的影响。
Academic analysis and simulation calculation about starting characteristic of motor generator system in low voltage were carried through.
针对电动机—发电机系统在低网压下的启动特性进行了理论分析和模拟计算。
A measurement principle, theoretical calculation and error analysis of piezoresistive differential pressure measurement system have been analyzed calculated as emphases.
本文着重分析计算了扩散硅差压测量系统的测量原理、理论计算、设计与误差分析。
Establishment of torque mathematic model for a variable speed turbo coupling is the key for analysis and calculation of system dynamic response.
建立调速型液力偶合器力矩特性数学模型是分析和计算机械系统动态响应的关键。
The IBIS model is used to help get exact information in the integrity constraint design of system board level or multiple board level signals for analysis and calculation.
IBIS模型可以帮助设计者在系统板级或多板信号完整性约束的设计中获取准确的信息，以进行分析和计算。
This system can fulfill the calculation and analysis for the structure and produce the calculation book automatically.
本系统能较好的完成结构的计算分析，并能自动生成图文并茂的计算书。
This thesis depicts the use of steel structure in high-rise apartment building, including the selection of structure system, analysis of calculation outcome, material and construction requirement.
介绍了钢结构在住宅公寓中的应用，包括结构体系的选择、计算结果的分析及材料和构造要求。
Mechanical calculation and structural deformation analysis were performed in the system design.
通过力学计算及结构变形分析，为系统设计提供参考。
Setting up an energy balance analysis model of heavy oil gathering system and gives evaluation index and calculation formula.
建立了稠油集输系统的能量平衡分析模型，给出了评价指标及其计算公式。
In this paper, the structural characteristics, parameters calculation, performance analysis, open loop hydraulic system with integrated plug in valves and PLC control system are presented.
介绍了该新型程控液压模锻锤结构特点、参数计算、性能分析、插装阀集成开式液压系统和PLC程序控制系统。
Thus an important basic is provided for calculation of speed rise when load rejection and for analysis of regulation system stability when load regulation.
这为解决非直联水轮发电机组甩负荷时转速上升的计算和调节负荷时调节系统稳定性的分析等问题提供了一个重要依据。
Finally, the experiment results gained from the FBG sensor system and traditional PZT sensor are both validated by Finite Element Analysis (FEA) calculation.
最后，光纤光栅振动传感系统和传统压电陶瓷传感系统的实验结果还得到了有限元计算结果的验证。
A new method for reliability analysis and calculation of the gray maintainable system is put forward using the gray theory under the condition of lacking information from its practical state.
从灰色可维修系统实际工作状态出发，在缺乏信息的条件下，运用灰色理论，提出其可靠性的分析计算新方法。
This article elaborates the reliability design method of hydraulic explosion-proof winch system and gives the frame sketch of reliability model and performs an analysis for reliability calculation.
阐述了液压防爆绞车系统的可靠性设计方法，给出了可靠性模型框图，并进行了可靠性计算和分析。
Power flow calculation is the most important and fundamental tool for the analysis of any power system.
潮流计算是电力系统分析最基本和最重要的工具。
An analysis and calculation of the suspension system of maglev ball by finite element method (FEM) and similarity principle is presented.
提出用有限元法及相似原理来分析、计算磁悬浮球的悬浮系统。
A general count model of locating tolerance analysis and calculation was established in the process of exploiting fixture CAD system.
在夹具CAD系统开发过程中，建立了定位误差分析计算的通用求解模型。
Analysis and drawing are generally used evaluation of pressure center in stamping die system which claims large calculation and fussy operation.
目前冲模系统中压力中心的求解方法通常采用解析法和作图法，计算量大，操作繁琐。
The article stresses the introduction of thermal balancing analysis of oil tank in hydraulic system, and parameter calculation of cubage and area of dissipation.
重点介绍液压系统中油箱的热平衡分析及其容积和散热面积参数的计算。
Based on the analysis on ventilation system, the calculation region of rotary fluid field is plotted out and meshed in unstructured grid.
本文通过对水轮发电机通风系统的分析，确定了旋转流体场计算区域，采用非结构化网格对计算区域进行离散。
The thesis links up dynamic load flow analysis and network topological analysis in power system as a whole to take dynamic load flow calculation of real time.
本文将电力系统网络拓扑分析和电力系统的动态潮流两个问题衔结起来，构成一个整体。
This system adopts open subgraph bank and the drawing, data management, analysis and calculation can be all completed on same operating platform.
系统采用开放式子图库，使绘图，数据管理，分析计算均在同一操作平台下完成。
The calculation of orifice, balance calculation of system parameters and analysis of turbine performances are the three main problems met in the test of turbo-pump linkage.
节流圈计算、系统调整计算和涡轮特性分析是涡轮泵联动试验中的三个主要问题。
The calculation of orifice, balance calculation of system parameters and analysis of turbine performances are the three main problems met in the test of turbo-pump linkage.
节流圈计算、系统调整计算和涡轮特性分析是涡轮泵联动试验中的三个主要问题。
应用推荐