Then completed a framework for the horizontal level wind loads of internal force and displacement calculation, the results calculated analysis, confirm the structure in the wind load security.
随后完成了对框架在横向水平风荷载作用下的内力和位移的计算，对计算结果进行分析，确认了结构在风荷载作用下的安全性。
From a Hubble analysis of the stars' colors, Crockett and his team calculated that the star-formation boom started about a billion years ago, a comparatively recent event in cosmological history.
通过哈勃行星分析行星的色谱，科洛·科特和他的小组计算出这些恒星的形成大约在1亿年前突然爆发起来，通过在宇宙学历史上与最近的大事件的比较。
The incidence of loss to follow-up was calculated using Kaplan–Meier methods and factors associated with loss to follow-up were identified by logistic and Cox multivariate regression analysis.
追踪损失发生率利用Kaplan -Meier方法加以计算，而追踪损失的相关因素则利用logistic回归分析和Cox多元回归分析加以确定。
Based on the analysis, it is set up a simple model that wheat transpiration can be calculated by meteorological data.
在分析基础上，建立了用常规气象资料计算小麦蒸腾速率的简化模式，模拟效果较好。
It is indicated by calculated example that the feasibility analysis method combining precise forecast of wave and wind with strip theory can give satisfactory results for engineering.
计算实例证明，利用波浪预报和切片理论相结合分析运输可行性的方法，可以得到满足工程需要的分析结果。
It can't be calculated if the analysis is limited to an idealized plane structure.
如果分析仅限于理想化的平面结构，这是不可能计算的。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
Through non-linear finite analysis , the dependence of fatigue life of solder joint on thermomechanical properties of underfill was calculated.
通过非线性有限元分析，计算出焊点疲劳寿命对下部填充料基本热力学性质的依赖关系。
The added benefits of reduced profile defects and protecting the extrusion die from overheating are not calculated in this financial analysis.
减少型材次品和保护过热的挤压模具的效益并没有计算在本财务分析中。
The engineering instance is calculated by ANSYS, the popular software for the finite elements analysis, and the results is same as that calculated by common method.
采用目前比较流行的大型有限元分析软件ANSYS对算例进行了分析计算，结果与常规计算方法的结果相符；
The above calculated results were based on two-dimensional nonlinear analysis, which did not allow for magnetic saturation at the back yoke.
上述计算结果是基于二维非线性分析，没有考虑导磁机壳的饱和问题。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
Using Fourier series, the frequency spectrum analysis was analyzed, and spectrum data of harmony wave less than 19 were calculated.
利用傅里叶级数对其进行了频谱分析，计算了次数小于19次的各次谐波电流均方根值的频谱数据。
The area of image is calculated by using edge tracing and vector analysis in this paper. The result is available in analysing practical biomedical and metallurgical images.
通过对边界的跟踪与矢量分析，实现了对面积的计算。实际用于生物医学、金相等图像分析，结果表明该方法可行。
By using the mechanism method, the potential productivities of light, temperature, precipitation and soil were calculated by regression analysis in each county of Henan province.
采用机制法通过对光、温、水、土逐级衰减计算了河南省各县市小麦的光、温、水、土自然生产潜力。
Then, the structural influencing coefficient and displacement amplification factor are calculated and compared with the analysis result of Pushover method.
本文系统地分析了多层抗弯钢框架的结构影响系数和位移放大系数。
The area of image is calculated by using edge tracing and vector analysis in this paper.
通过对边界的跟踪与矢量分析，实现了对面积的计算。
Analysis shows that the calculated results accord with the reality of the project.
分析结果表明，计算成果符合工程实际。
Through analysis of the calculated results, some suggestions are proposed from the viewpoint of basic temperature difference and temperature stress.
通过对计算结果的分析，从基础温差和温度应力的角度，提出了认识和建议。
Based on the calculated results and the analysis of slagging conditions, he possibility of slag formation is predicted.
根据计算数据和对结渣条件的分析，预报了结渣的可能性。
Actual applied result shows that actual tap temperature drop coincides with analysis calculated value. Analysed conclusions have great guidance significance to actual operation.
实际应用情况表明：实际出钢温降与分析计算值基本吻合，结论对实际操作具有指导意义。
The method of the calculated modal analysis and the modal correlation is introduced, and the geometrical model and finite element model are established.
建立了发动机实体和有限元模型，介绍了计算模态分析和模态相关性分析的一般方法与理论。
The secondary stresses of typical planar steel frames due to the rigidity of panel points are calculated by the finite element analysis program.
应用有限元分析软件，对两种跨度下典型平面钢屋架节点刚性所产生的次应力进行了分析计算。
The loads and resistances statistical data affecting gate faceplate reliability analysis was calculated and analyzed using the statistical data obtained, and their statistical parameters was gained.
利用统计分析所得的数据，对影响闸门面板可靠度的荷载及抗力统计数据进行了分析计算，得到其统计参数。
The main design parameters of waste heat boiler with heat tube are calculated, and economic analysis of its different use is carried out.
对热管余热锅炉主要参数进行了设计计算，并对不同用途方案进行了经济分析。
The results are analyzed an compared with those calculated by using the asymptotic analysis.
对所得结果作了分析并与用渐近分析法的计算结果作了比较。
The genetic similar coefficient was calculated and cluster analysis was conducted.
进而通过计算遗传相似系数进行聚类分析。
The strength, rigidity, stability and torsional rigidity of the bodywork structure were calculated by using finite element analysis. Thus the optimum fillet of the bodywork structure can be specified.
采用有限单元法对车体结构的强度、刚度、稳定性、挠跨比、扭转刚度进行计算，为车体设计提供了参考依据。
The strength, rigidity, stability and torsional rigidity of the bodywork structure were calculated by using finite element analysis. Thus the optimum fillet of the bodywork structure can be specified.
采用有限单元法对车体结构的强度、刚度、稳定性、挠跨比、扭转刚度进行计算，为车体设计提供了参考依据。
应用推荐