I found that if two elements undergo the same type of movement the launching site of one element must c-command the launching site of the other element.
我发现，如果两个成分要作同类型的位移，其中一个的起点必须成分统治另一个的起点。
He was posted to Hong Kong as second-in-command of C Squadron.
他被派到香港任C中队的副队长。
The next step would be to attempt reinitialize the drive using SYS command that hopefully is on your boot diskette by entering SYS C: from your A: drive.
接着就要试着用SYS命令来重新对驱动器进行初始化，但愿该命令是在你的启动盘里，在A：驱动器下键入SYSC：。
You can do this by initiating a CLI session and passing the appropriate command with the -c argument.
实现方法就是发起一个CLI会话并使用- c参数传递相应的命令。
The admin commands or task command can be invoked in batch or interactive mode, in a script, or from an operations command prompt using the wsadmin -c command.
可以在脚本中以批处理模式或交互模式调用管理命令或任务命令，或使用wsadmin- c命令从操作命令提示符调用。
The lsdev -c command will show all the devices that are on the old server; you can then run the lsattr and LSCFG commands against that output to get all the customized Settings and attributes.
lsdev—c命令将展示旧服务器上的所有设备；随后可以针对输出运行lsattr和lscfg命令来获得所有定制的设置和属性。
Try running the command on a C source file -- it should output the entire main() { } block, including the initial "main()" and the closing '}'.
试着对C源文件运行该命令 --它应该输出整个main() { }块，包括开始的 "main()"和结束的'}'。
This command runs the site from c: \ myapp folder over port 80.
该命令会运行c： \myapp目录中的站点，端口号是80。
You can check your server configuration Settings with this command: onstat -c.
您可以使用下面的命令检查服务器配置：onstat- c。
Next, open a new command window and change the directory to c: \ MQJMS \ batch and run the classpath.cmd variable to initialize the classpath variable.
接着，打开一个新的命令窗口并转到c： \mqjms \batch目录，运行classpath . cmd变量来初始化classpath变量。
Start a command prompt window, change to the directory where your test files are located (c:\og61\dwsample) and run your setup.bat command to set the environment variables
请启动命令提示窗口，更改到测试文件所在的目录 (c:\og61\dwsample)，然后运行您的setup.bat 命令以设置这些环境变量
Finally, unless the -c (accept_all) option is given from the command line, autotag.pl will ask if it's okay to rename the file.
最后，除非通过命令行给出- c (accept_all)选项，否则autotag . pl将询问是否可以对文件重命名。
A new rset is created by the mkrset c command.
使用 mkrsetc命令创建新的资源集。
In this case, however, -c is not available, as this is a command line option that is reserved for the wsadmin utility and therefore is not available for scripts.
但是，在这里不能使用- c，因为这是为wsadmin实用程序保留的命令行选项，脚本不能使用它。
Open up the Windows command prompt, change the directory to c: \ WSDK \ bin.
打开窗口命令提示符，转到C： \wsdk \bin目录。
When you get to section 2, you may have a problem with the second command: su -c 'yumdownloader — source kernel'.
执行到第2部分时，可能会在执行第二条命令su - c'yumdownloader——source kernel '时遇到问题。
Create a folder called DotNETClient and open a command prompt at "c: \ DotNETClient".
创建一个名为DotNETClient的文件夹，并在“c： \ DotNETClient”位置打开一个命令提示符。
Change the directory to c: \ WSDK \ bin and execute the following command to deploy the Price web service.
转到c： \wsdk \bin目录并执行下面的命令以部署PriceWeb服务。
For the immediate problem, yes, shell is better; it makes good use of the built-in uniq -c command.
在目前这个问题上，我们承认，Shell的表现更为出色；它很好地利用了内置的uniq- c命令。
Deploy the code using the ant deploy command under the c: \ orderapp folder.
在c： \orderapp文件夹下使用antdeploy命令来部署代码。
You can easily interact with DB2 Express-C databases using the command-based user interface tool, called the DB2 Express-C command Editor (Figure 1), which consists of two panes.
您可以使用基于命令的用户界面工具(称为DB 2Express - c命令编辑器，请参见图1)方便地与DB 2 Express - C数据库进行交互，该工具包括两个窗格。
Set the path variable to include c: \ WSDK \ bin and c: \ WSDK \ SDK \ bin and run the following command: wsdkconfig.
设置路径变量使之包括c： \wsdk \bin和c： \ wsdk \sdk \ bin，并运行wsdkconfig命令。
If CLASSPATH is set correctly and the software really is installed in c: \ Derby, the command shown in Listing 4 reports useful version information.
如果正确设置了CLASSPATH，并且在c： \ Cloudscape_10 . 0中真正安装了Cloudscape，那么清单4中展示的命令就会报告有用的Cloudscape 10.0版本信息。
Restart your plackup command (type Ctrl+C to stop the process, then run plackup 1.psgi to start it).
重新启动plackup命令（输入Ctrl+C停止进程，然后运行 plackup 1.psgi启动）。
It was based on an old-fashioned command line interface that confronted users with surly little prompts such as C:\>.
该系统建立于老式命令行界面之上，用户需要与干巴巴的提示性语言打交道，比如C:\>之类。
The CCS-C contract, first awarded in early 2002, enables a unified Command and Control (C2) capability for the 50th Space Wing's complete family of MILSATCOM satellite programs.
CCS - C合同在2002年初首次授予，为空军第50航天联队MILSATCOM全系列卫星项目赋予统一的指挥和控制(C2)能力。
The Royal Thai Air Force has procured an integrated air defence system with Gripen C/D, the ERIEYE airborne early warning system and a Command and Control C2 system including data link communication.
泰国皇家空军已经向瑞典购买了一套综合防空系统，包括鹰狮C/D战斗机、“爱立眼”机载早期预警系统和包含数据链通信的指挥控制C2系统。
This command will compile the provided C-source code.
该命令将编译C 源代码。
When nc is executed with the command-line parameters -l -p -c, it waits until it receives a connection to that port, and then it executes the command.
在使用命令行参数- l- p- c执行nc时，nc将一直等待，直到在该端口上接收到连接，然后执行指定的命令。
The -c argument lets you provide a command to the invocation.
c参数让您能够为调用提供一个命令。
应用推荐