The effect of neutral trap on tunneling current in ultrathin MOSFETs is investigated by numerical analysis.
用数值分析的方法讨论了中性陷阱对超薄场效应晶体管（MOSFET）隧穿电流的影响。
The light intensity distribution of diffraction of circular aperture was investigated by numerical analysis.
利用数值分析的方法分析了由边界波理论公式所得的圆形光阑衍射场的光强分布。
The effects of the tip shape of V-groove on drag reduction and flow field characteristics by numerical analysis;
近年来对于水下条纹沟槽表面减阻的研究多集中在试验方面，理论分析和数值计算进行的却不多。
Chapter IV is the empirical part, we obtain how scaling and long-range dependence affect option pricing by numerical analysis.
第四章是本文的实证部分，通过数值分析得出标度与长记忆性对期权定价的影响。
The temperature and volumetric moisture content distribution under exposure of solar radiation are simulated by numerical analysis.
通过数值分析，模拟了太阳辐照条件下土壤内温度和含水率分布曲线。
The properties of linear networks can usually be characterized better by symbolic network functions than by numerical analysis results.
符号网络函数，与网络的数值分析结果相比，往往可以更好地描述线性网络的性能。
By numerical analysis, a series of curves are given to describe the magnetic flux density distribution character of the flat spiral coil.
通过数值分析，给出了一系列描述平面螺旋线圈磁场分布特性的曲线，讨论了线圈结构对磁场分布的影响规律。
The effect of the inclined bracing on the enclosure deformation control is studied by numerical analysis considering the time-space effect.
在此基础上，结合“时空效应”理论进行了数值计算分析，研究了斜抛撑对围护结构变形的控制作用。
The control of nonlinear gain for interaction between solitons has been studied by numerical analysis in band-limited amplification propagation system.
应用数值分析方法研究了带宽限制放大传输系统中非线性增益对孤子间相互作用的控制作用。
It is shown by numerical analysis that the lining-wall is critical for the safety of diaphragm and the displacement of diaphragm will be doubled without lining-wall.
计算表明：分层逆作法施工内衬墙对地下连续墙的变形影响很大，没有内衬墙时地下连续墙变形增加一倍。
In order to analyze weak plane grouting effect of consequent bedding rock slope, it is simulated by numerical analysis model which is based on Lagrangian difference method.
为了分析顺层岩质边坡弱面注浆效应，采用了基于拉格朗日差分法的数值分析模型对其进行模拟。
Many important information of a crystal is included in the convergent polarized light interference pattern, and can be completely utilized by numerical analysis of the pattern.
晶体会聚偏光干涉图包含了晶体特性的许多信息，建立偏光干涉图的定量分析方法可以使这些信息得到充分利用。
It was shown that the failure members obtained by numerical analysis agreed very well with practical situation, which verified the air temperature rise simulation and the FEM analysis.
有限元数值模拟杆件破坏情况与实际火灾的破坏情况一致，验证了温度分布的正确性和有限元分析过程的合理性。
By numerical analysis of the impact energy and static indentation force under the same dent depth, a new equivalent formula is set up, which corresponds well with the results of the tests.
对相同凹坑深度下的冲击能量与准静态压痕力进行了数值分析，并提出了冲击能量与准静态压痕力间的等效性公式。
The influence of the material parameters on the void formation and growth is considered by numerical computation and the results are compared with those for static analysis.
通过数值计算，分析了材料参数和球体的半径比对孔穴生成和增长的影响，并与相应的静态结果进行了比较。
In the heat transfer analysis, combining temperature on tire side tested by drum test, a numerical inverse method is described for determining the heat convection boundary on tire side.
热传导分析中，依据实测的轮胎胎侧温度场，提出了一种基于实验的数值反演方法来确定胎侧的对流热边界条件。
This paper presents the analysis of the vertical viscoelastic dynamic responses of pipe group by Laplace numerical inversion method.
应用担普拉斯数值反演方法分析了群桩垂向粘弹性动力反应。
The probability density distribution of peak sidelobe levels is studied by theoretical analysis and numerical simulation, and several approaches of suppression of sidelobe level degradation are given.
通过理论分析和数值模拟，计算了峰值旁瓣电平的概率密度分布，并给出了抑制旁瓣电平恶化的一些措施。
By theoretical analysis and numerical computation of MS wave's propagation, the propagation law of wave in attenuation elastic-viscosity media had been given.
对微地震波的传播进行了理论分析和数值计算，得到了存在衰减的粘弹性介质中纵波的传播规律。
By numerical computation and analysis the relationship among critical velocity and impact mass, hardening modulus, buckling time was given.
通过数值计算和分析，给出了临界速度与冲击质量、线性强化模量及临界时间间的关系。
By theory and numerical analysis, expounded the vibration of wire electrode of HSWEDM machine tool.
通过理论和数值分析，阐述了高速走丝电火花线切割机电极丝的振动情况。
The gain character and power density distribution in the active fiber of double clad fiber laser (DCFL) with different pump modes are investigated by means of numerical analysis.
本文通过数值分析研究了L D抽运方式对双包层光纤激光器增益特性及光纤内光功率分布的影响。
By theoretical analysis, numerical simulation and experiment research, the Interleaver based on optical all-pass filter technique is investigated.
对基于光全通滤波技术的奇偶交错滤波器进行了理论分析、数值模拟和实验研究工作。
The linearized problem is analyzed and stability boundaries which characterize instability of a plate are obtained by means of numerical and analysis methods.
采用分析与计算相结合的方法着重讨论了热屈曲的线性化问题，获得了反映环板失稳特征的稳定边界。
By numerical modeling analysis, the effect of different reinforcement measures to improve the stability of dam abutment of thin rock mountain is studied in the paper.
通过数值模拟研究，分析了不同工程加固措施对改善单薄山体拱坝坝肩岩体稳定性的效果。
We investigate the generation, properties and applications of optical solitons in nonlinear photonic crystal (PC) waveguides by theoretical analysis and numerical simulation.
本文采用理论分析和数字模拟相结合的方法研究非线性光子晶体波导中光孤子的产生、特性及其应用。
Processing analysis by numerical simulation(NS) of deep drawing step in progressive die(DDSPD) quickly and accurately was very important.
在带有拉深工步的级进模设计中，用数值模拟技术对其拉深工步进行工艺分析是非常重要的。
Processing analysis by numerical simulation(NS) of deep drawing step in progressive die(DDSPD) quickly and accurately was very important.
在带有拉深工步的级进模设计中，用数值模拟技术对其拉深工步进行工艺分析是非常重要的。
应用推荐