Wind is a current of air caused by a vacuum caused by hot air rising.
风是由热空气上升产生真空而引起的空气流动。
The analgesic effects were assessed by hot-plate test in mice and twisting response induced by ethanoic acid in mice.
通过热板试验对小鼠的镇痛作用进行评价,并通过乙酸对小鼠的扭转反应进行评价。
Some economists argue that the problems caused by hot money have been exaggerated.
一些经济学家认为,热钱引发的问题被夸大了。
The volcanic soil is scoured by hot winds that blow consistently year round through the channel between the Kenyan and Ethiopian highlands.
终年不断的热风横扫过肯尼亚和埃塞俄比亚高原间的河道,冲刷着那里的火山土壤。
But in some areas, especially in South China, autumn is late in coming and people are still bothered by hot weather.
但在某些地区,特别是南方,秋天来得稍晚,大家还要忍受一阵子炎热的天气。
The products were extracted by hot toluene and characterized by TEM, IR and XPS.
对所得的产品用热甲苯进行抽提,并用TEM、IR、XPS等手段进行分析。
Several graphite samples were made from calcined coke and coal tar by hot pressing.
用煅烧石油焦和煤焦油为基本原料,采用热压工艺制备了几种石墨材料。
It is cooked by the sun heating the sand or by hot gases that rise out of the ground.
食物是由阳光将沙子加热所煮好,或是由地底冒出的滚烫气体所煮熟。
High quality diamond thin films were grown by hot-filament chemical vapor deposition.
采用热丝化学气相沉积生长出优异的金刚石薄膜。
The effect of moisture content on shale stability was investigated by hot rolling test.
用改进的热滚分散法探讨了含水量对硬脆性泥页岩稳定性的影响。
Carbon nanotubes in experiments were synthesized by hot filament chemical vapor deposition.
所用的碳纳米管是用热灯丝化学气相沉积法合成的。
A method and apparatus for nucleation and growth of diamond by hot-filament DC plasma deposition.
利用热灯丝dc等离子体沉积使金刚石成核和生长的方法和设备。
The clutch gears can not be processed by cutting, but by hot forging due to its structure and shape.
牙嵌齿轮因其结构形状所致无法切削加工,需要热锻成形。
B-doped diamond films were grown on graphite substrates by hot filament assisted CVD method (HFCVD).
采用固体三氧化二硼,用热丝辅助化学气相沉积法在石墨衬底上沉积了掺硼金刚石涂层。
Pain threshold was determined by hot plate method, coagulation time of blood and 5-ht were determined.
采用热板法测痛阈,取血测凝血时间,取脑匀浆测五羟色胺(5 -HT)。
The hot ductility is influenced by hot worked temperature, sulfur content, nitrogen content and so on.
含氮不锈钢的高温热塑性主要受热加工温度、钢中硫含量、氮含量等因素影响。
Unlike dip coatings, electrodeposited paint is not washed off in enclosed areas by hot vapors during curing.
与浸法涂装不同,电泳沉积在内腔部位的涂膜,在烘干过程中不会被热蒸汽洗掉。
Bulk graphite was prepared from calcined coke and coal tar pitch precursors by hot pressing and graphitization.
用煅烧石油焦和煤沥青为基本原料,采用热压和石墨化工艺制备了几种纯石墨材料。
It is considered that the carbon gradient of carburized layer can be controlled by hot-rolling deformation rate.
分析认为,可以用热轧形变量大小控制渗碳层的碳梯度。
The purpose of this paper is to study the technology for manufacturing wood-cement particleboard by hot-pressing.
本文主要论述了热压法制造水泥刨花板的工艺。
Crude polysaccharide was gained by hot water extraction, alcohol precipitation, decolorization and deproteinization.
以莪术为材料,经热水提取、酒精沉淀、脱色、脱蛋白得粗多糖。
I found out that the sweat by labor is different from the sweat by hot, the former looks more transparent, even shines.
我发现劳动的汗水和仅仅因为炎热的汗水有些不一样,前者似乎更加晶莹剔透。
METHODS: The analgesic effect in mice was observed by hot plate and body torsion induced by antimony potassium tartrate.
方法:采用小鼠热板法和酒石酸锑钾所致的小鼠扭体反应,观察小鼠的镇痛作用。
The crude polysaccharides from Enteromorpha linea were extracted by hot water and refined by ethanol precipitation method.
采用热水浸提、醇沉精制提取缘管浒苔粗多糖,并研究了其理化性质。
Polycrystalline silicon thin films were prepared by hot-filament chemical vapor deposition (HFCVD) on glass at low-temperatures.
采用热丝化学气相沉积法(HFCVD)在普通玻璃衬底上低温沉积多晶硅薄膜。
It also decreased the licking rear feet times of mice induced by hot plate and the torsion times of mice induced by acetic acid.
减少热板引起的小鼠舔后足次数和乙酸引起的扭体次数。
With graphite and PF resin as raw materials, a new kind of graphite matrix composite is prepared by hot pressure molding formation.
以石墨与酚醛树脂粉料为原料通过低温热模压成形工艺制备新型石墨基复合材料。
The substance was extracted by hot distilled water to obtain a water-soluble substance (WSS) and a water-insoluble substance (WIS).
白色云状物经热水浸提、离心后,得到水溶性物质(WSS)和水不溶性物质(WIS)。
The surface quality and molding efficiency of plastic parts are improved by hot-runner system and gas-assistance injection molding.
采用热流道系统、气辅注射成型提高了塑料件的表面质量和成型效率。
The surface quality and molding efficiency of plastic parts are improved by hot-runner system and gas-assistance injection molding.
采用热流道系统、气辅注射成型提高了塑料件的表面质量和成型效率。
应用推荐