The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
Using ABAQUS to build the finite element model of reinforced concrete hollow slab and rubber bearing, simulate contact effect between them by set contact property.
运用有限元软件ABAQUS建立钢筋混凝土桥面板与橡胶支座的有限元模型，设置接触属性来模拟二者之间的接触作用。
Through the comparison of modal shape of floating caliper brake system elements by finite element modal analysis and experiment modal analysis, the validity of finite element model is confirmed.
通过对比浮钳式盘式制动器各零部件的有限元模态分析和试验模态分析所得出的模态阵型，验证了有限元模型的正确性。
By analysis of the middle section stress of the hollow slab in the two situations of consider contact and not consider contact, verified the accuracy of contact finite element model in that situation.
通过考虑接触与不考虑接触两种情况时桥面板跨中截面的受力分析，验证该问题中接触有限元模型的正确性。
CONCLUSION: the finite element model of artificial disc replacement can be established by CT scanning, digital processor and computer aided design, and used for further study on spinal biomechanics.
结论：通过CT断层扫描、图像数字化处理及计算机辅助设计等方法，可以建立腰椎人工椎间盘置换的有限元模型，用于脊柱生物力学的进一步研究。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
It is analyzed for the influence of oil films on the reactions of Marine shaft system by establishing the finite element model of the oil films.
建立了滑动轴承油膜的有限元模型，分析了油膜对船舶轴系轴承反力的影响。
In this paper, we discuss the numerical modeling of complex resistivity anomalies for Cole-Cole dispersion model by the Finite Element Method (FEM).
本文研究了用有限元数值方法模拟柯尔—柯尔复电阻率模型异常规律的问题。
Structural free vibration characterization and seismic response were calculated by means of beam-plate linear mathematical model of finite element method.
采用梁、板线性有限元数学模型计算了结构自振特性和地震响应。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
The seismic analysis of liquid storage container is conducted by finite element method for transient dynamic fluid-solid coupling model.
应用流体固体动力耦合统一分析模型的有限元法，进行了储液池的抗震分析。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
建立了热过程的数学模型，并采用有限元等数值方法模拟其热过程。
Using enthalpy to deal with latent heat of solidification the numerical model is solved by finite element method, and a steady temperature field can be obtained under a certain condition.
在此基础上采用有限单元方法数值求解模型，并运用热焓法处理凝固潜热，得到了一定工艺条件下的稳态凝固温度场。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
The strain mode is acquired by analysing the finite element model of the intact and damaged structure.
通过完好结构和有损伤结构的有限元分析。
By using finite element analytical method, dynamic analysis has been carried out on this model.
采用有限元分析方法，对传剑系统进行了动态分析。
The effect of blank holder thickness on stress transfer was studied by means of an elastic solid element finite element model. The simulation results were verified by experiments.
利用弹性实体单元有限元模型研究了压边圈厚度对压边应力传递的影响规律，并与实验结果进行了对比分析。
In this thesis, the stress intensity factors of top-down cracks caused by loading are calculated using three dimensional finite element model and compared to the results of plane strain model.
本文采用三维有限元模型分析了荷载作用下自上而下裂缝尖端的应力强度因子，并与二维平面应变模型分析的结果进行比较。
According to rock soil engineering properties and dynamic character of the ash dam of Anyang Power Plant, the dynamic analytical model is set up by the finite element method.
根据安阳电厂灰坝岩土工程性质及其动力学特性，建立了适合灰坝工程的动力分析模型并采用有限元法进行了动力分析。
The repaired honeycomb structures are calculated, and the influence of glue's parameters is discussed by the finite element model and program stated above, the technique of its repair is studied.
建立了蜂窝夹芯结构的脱胶修补计算模型，分析了胶膜参数对剩余强度的影响，初步研究了其修补技术；
The finite element model is expressed by mass and stiffness parameters, which are determined by minimization of weighted Euclidean, norms of orthogonality conditions and characteristics equations.
有限元模型用质量和刚度参数表示，这些参数由正交条件和特征方程的加权欧氏范数取极小值来确定。
By the equilong unit finite element method based on the Wenkel model, the computation is speeded up remarkably.
采用文克尔模型为基础的等长单元有限元法，显著地提高了计算速度。
In this paper, the model of the system established by the Finite Element Method will be updated by BP Neural Network theory.
本文将神经网络理论用于对利用有限元分析方法得到的系统模型进行修正。
The finite element model of this sensor is built by applying the finite element analysis software ANSYS.
用有限元分析软件ANSYS建立了该传感器的有限元模型。
The soil consolidation can be simulated by using a finite element numerical model of fluid-solid coupling of fluid seepage in a deformable porous medium.
针对饱和土固结问题，利用可变形多孔介质中流体渗流的流固耦合有限元数值模型，对该问题进行了数值模拟。
By setting up finite element model, the load stress and the warping stress of the two materials pavement are calculated and compared.
建立有限元模型，计算配置两种材料道面的荷载应力与翘曲应力并进行比较。
This paper analyzes the structural stress of a forge press by finite element method, and tests and verifies its correctness by the model experiment.
本文利用有限元方法计算分析了锻压机架的结构应力，并用模型实验检验了有限元计算的正确性。
By using a dynamic contact analysis, a finite element model is developed to calculate the response of composite laminates to low velocity impact. A numerical example is given.
利用动力接触分析方法模拟冲击的接触行为，提出了一种新的计算复合材料层板低速冲击响应的有限元模型。最后给出一个算例。
By using a dynamic contact analysis, a finite element model is developed to calculate the response of composite laminates to low velocity impact. A numerical example is given.
利用动力接触分析方法模拟冲击的接触行为，提出了一种新的计算复合材料层板低速冲击响应的有限元模型。最后给出一个算例。
应用推荐