The principle and control strategy of the proposed converter are described. Its operational feasibility is also verified by digital simulation using the PSCAD/EMTDC package.
分析了该换流器的拓扑结构和工作原理，并使用PSCAD/EMTDC软件对其进行了仿真验证，为将来的实机制造提供了参考。
By digital simulation, the Ac carried wave system and its equivalent Dc system are checked and the feasibility of Dc method equivalent to the Ac carrier wave system is verified.
通过数字仿真，比较了交流载波系统和其等效直流系统，验证了交流载波系统等效直流方法的可行性。
Comparing with traditional maximum likelihood detector and optimized Bayesian detector, it is demonstrated by digital simulation that this new fuzzy detector gets good control results.
数字仿真结果表明，对比传统的最大似然检测器和最优贝叶斯检测器，这种新型的模糊检测器取得了良好的控制效果。
The basic principle of the Active Power Filters (APF) is described. In this paper, the performance of Current-fed APF is studied and compared with Voltage-fed APF by digital simulation.
本文阐述了有源电力滤波器的基本原理，通过数字仿真研究了电流型滤波器的性能，并与电压型滤波器作了对比。
Also this closed loop controlled system is modelled and its dynamic behaviors are analyzed by digital simulation. The influence of controller parameters on motion of the rotor and th...
本文还建立了此闭环控制系统的数学模型，通过数字仿真分析了其动态特性，探讨了控制器参数对转子运动的控制效果以及与电磁轴承动刚度之间的变化关系。
By digital simulation and detection of gearbox fault signal the detection effect of the novel bilinear time-frequency transform is validated for the transient components in complex signal.
通过数字模拟实验与齿轮箱故障信号检测，验证了新的双线性时间-频率分布对复杂信号中瞬时分量的探测效果。
Based on the comprehensive load model considering the distribution network as the research object, by digital simulation method, and the load model for an in-depth study of the simulation.
本文以考虑配电网络综合负荷模型作为研究对象，采用数字仿真方法，对该负荷模型进行了较为深入的仿真研究。
A new infrared digital guiding method is used. AGV's motion guiding and controlling simulation in free path are completed by using single chip microcomputer.
利用红外数字导引新方法，使用单片微型计算机，对自由路径AGV的导引和运动控制进行了模拟仿真。
For a typical assembly stress problem, digital simulation is conducted by means of the hybrid method with different numerical calculation methods.
针对一个典型的装配应力问题，运用不同的数值计算方法，对混合求解法进行了数值模拟。
The model and method for estimating circuit design reliability by using digital simulation are established. A simulation example of the typical fuze circuit is given in this paper.
给出了设计可靠性的建模方法和用数字仿真评估设计可靠性的模型方法和仿真过程并给出了一个典型电路的仿真实例。
The said digital gate circuit macro model can be used to perform a logical simulation for gate circurit and the digital circuit formed by the gate circuit.
提出了一种建立数字门电路宏模型的方法 ，采用该方法建立的门电路宏模型可以对门电路以及由门电路构成的数字电路进行逻辑仿真 。
Plenty of digital simulation calculations and simulation calculations using EMTP electromagnetic transient program indicate that the true fault location can be determined by the modified algorithm.
大量数字仿真及EMTP仿真计算表明修正算法可取得唯一区内真根。
The robustness and effectiveness of the proposed algorithm are tested by a series of restoration experiments to recover the digital simulation and real turbulence-degraded images.
在微机上对数字模拟和实际退化图像进行了一系列恢复实验，验证了算法的有效性和稳健性。
This paper studies the dynamic mathematical model of the dual fuel servo system in gas turbines by the methods of the theoretical modelling and digital simulation.
采用理论建模和数字仿真方法，对燃气轮机双燃料伺服系统的动态数学模型进行研究。
Based on the thorough analysis to the existing digital scene generators, a new architecture is advanced by means of the simulation based on knowledge.
在对现有的数字场景产生器系统进行了深入分析的基础上，利用基于知识的仿真技术，提出了一种新的体系结构。
The influence of input weighting on evaluation function in digital optimal predictive control is investigated. Its function relation derived has been proven by simulation.
研究了在数字最优预见控制中，输入权重对评价函数的影响，给出了两者的函数关系，最后进行了仿真验证。
This paper theoretically advances the conception of reverse statistical simulation in the statistical analysis of VLSI, by which a statistical simulator of NMAS digital circuit STANMOS is developed.
本文在理论上提出了逆向统计模拟思想，并用以开发了NMOS数字集成电路统计模拟通用软件——STANMOS。
With the software, CATIA, the rationality of the method on Tri-Dimensional digital modeling, simulation and analysis is verified by the example of the depot of magnetic levitation train.
本文借助CATIA软件，结合磁悬浮列车动车段工程实例验证了工程设计的三维建模与仿真理论的合理性。
The method was developed for the matrix determination and the component analysis by the character line in Ni-based alloy based on digital simulation.
在镍基合金可见光谱计算机模拟基础上，研究利用镍元素及成分元素特征谱线进行基体鉴别和成分元素分析的方法。
By the test in the results of simulation or digital design, the results show that compared with traditional methods, this presented method has higher efficiency.
通过对仿真和数字化设计模型数据进行检验，结果表明，采用此方法比传统方法更有效。
The power experiment proved that the simulation results are exact and the digital welding inverter developed by us accords with the design requirements and can meet the need of welding process.
功率负载的实验表明，仿真结果准确，本文研制的数字化弧焊逆变电源符合设计要求，满足焊接工艺的需要。
Digital wave filters were designed with the computer by use of different simulation design methods, and the design features of different digital filters were checked and compared.
利用数字滤波器的不同模拟化设计方法，进行了计算机上的设计实现，检验并比较了不同形式的数字滤波器的设计方法的特性。
The technology of computer digital simulation on casting process is an important frontal field of material science and technology, which is acknowledged by the public.
铸造过程计算机数值模拟技术是当今公认材料科学的重要前沿领域。
By computer simulation with convolution sum of FIR digital filter, the results show that the model is the same as traditional binary coding arithmetic which can be used in chaotic...
通过FIR数字滤波器卷积和操作的计算机数值仿真表明，采用这些方法运算得到的结果与传统二进制算术编码算法完全等效，可应用于混沌信号处理系统。
The said digital gate circuit Marco model can be used to perform a logical simulation for gate circuit and the digital circuit formed by the gate circuit.
本文提出了一种建立数字门电路宏模型的方法，采用该方法建立的门电路宏模型可以对门电路，以及由门电路构成的数字电路进行逻辑仿真。
The paper mainly studies the latter. We make use of the super-chaos configuration and parameter map in the digital information transmitting, which are proved to be with high security by simulation.
本文在分析前者之后，主要讨论了混沌同步在数字信息传输中的应用，分别利用一类超混沌构造法和参数映射法传输数字信号，仿真结果表明达到了较好的保密效果。
In this paper, the extension theory of bandwidth in digital system and three key points of frequency band extension technology are studied experimentally by simulation.
本文主要研究了数字系统频带展宽原理及频带展宽中的三个关键技术。
The error-rate performance of the high-speed QPSK digital satellite communication system with cochannel large capacity FDM-PM signal interference is studied by means of computer simulation.
本文用计算机模拟的方法研究高速QPSK数字卫星系统受大容量FDM-FM信号同波道干扰时的系统误码特性。
Finally, the validity of digital correction is verified by simulation and practical measurement of a UWB quadrature demodulation receiver.
最后，对某超宽带正交解调接收机的实际测量结果的数字校正，验证了这种方法的有效性。
Finally, the validity of digital correction is verified by simulation and practical measurement of a UWB quadrature demodulation receiver.
最后，对某超宽带正交解调接收机的实际测量结果的数字校正，验证了这种方法的有效性。
应用推荐