It also puts forward some technology measures to improve the reliability of the bus protection device of the same kinds.
并找出了提高同类母线保护装置运行可靠性的技术措施。
To avoid its influence on bus protection, the bus protection device with digital optical current transducer is developed.
为彻底解决电流互感器饱和对母线保护影响，开发了基于数字式光电互感器的数字式母线保护装置。
When we reform the bus protection, we should make an equipment withdraw plan and working guide to raise the work efficiency.
对于母差保护的改造，应制定停电计划，编制作业指引，提高工作效率。
The problems of secondary wiring occurring in bus protection reform are analyzed, and the corresponding solutions are proposed.
对母线保护改造工作中所遇到的二次接线问题进行分析，并提出相应解决办法。
Bring forward a transfer scheme of transmission of samples values and GOOSE which combine with distributed bus protection, and then analyzed.
提出了结合分布式母线保护的采样值传输和GOOSE传输实现方案，并进行了分析。
So the research on distributed bus protection based on IEC61850 will play an important part in promoting substation comprehensive digitization.
因此研究基于IEC61850的分布式母线保护对推动变电站全面数字化起着重要的作用。
BUS protection PANEL, a module (black box) containing electrical circuits for control and protection of electrical alternating current supply to the airplane.
汇流条防护板，黑匣子式的组件，内含控制和保护飞机交流电源的电路。
The protected object of bus protection is a function with certain input and output, which can be represented by ANN model, or approximated by ANN mathematical model.
母线保护的物理对象是一个输入输出关系确定的函数对象，可用一个ANN模型去替代，或用一个ANN数学模型去逼近母线保护物理对象的输入输出之间的函数关系。
By the reform of the main bus connection, we should pay attention to the change of operation mode, reconsider the bus protection scope, and edit the operation rules.
主接线方式变更后，要关注运行方式的变化，重新考虑母差的保护范围，修编倒闸操作规程。
Seeing that the importance of the bus protection wiring in bus coupler current phase comparison, in this paper an on-load testing verifying its wirings is introduced.
针对母联电流相位比较式母差保护接线的重要性，文章介绍了一种带负荷测量法去验证母联电流相位比较式母差保护接线正确的方法。
The operation of WMH-100 microprocessor-based bus protection in Xinxiang thermal power plant is introduced, and the dynamic simulation test and the test before operation are also introduced.
介绍了WMH100型微机母线保护装置在新乡火电厂的运行情况，并介绍了本装置的动模试验及投运前试验项目。
Physical object of bus protection is a function with certain relation between inputs and outputs, which can be replaced by an ANN model, i. e. can be approximated by an ANN mathematical model.
母线保护的物理对象是一个输入输出关系确定的函数对象，可用一个ANN模型去替代，或用一个ANN数学模型去逼近母线保护物理对象的输入输出之间的函数关系。
This article indicates the principle for ANN bus protection based on function approximation ability, analyzes the functional relation of bus-bar object and builds the ANN model of bus-bar protection.
叙述了基于ANN函数逼近能力的母线保护原理，分析了母线保护物理对象的函数关系，构建了母线保护的人工神经网络模型。
An intelligent printer card is designed to reduce the main CPUs working load of digital bus protection, which is based on80386EX and used to implement the tasks of printing data processing and print.
为减轻微机母线主保护CPU的工作负荷，开发一个以80386ex为核心的智能打印板完成数据处理及打印任务。
As a try for circuit standardization, the system realizes the standard protection circuit unit and recovering-time circuit unit, which are connected to system through standard 44 pins' bus interface.
作为标准化的尝试，本系统实现了标准的保护电路单元和恢复时间电路单元，通过44芯总线插座与标准总线接口连接。
The basis of software protection with CPLD is to design circuits according to PCI local bus criterion and the goal of software protection.
根据PC I局部总线技术规范和所要达到的软件保护的目的设计所需的电路是实现软件保护技术的基础。
This paper describes the features and structure of CAN bus and based on it's principle, gives the connection of each protection unit with the system computer.
本文叙述了CAN总线的特点及结构，并运用CAN通信总线的原理，实现各保护单元与系统机的连接。
Characteristics of transient protection depend on the damping properties of the bus capacitance.
暂态电流保护运行性能取决于母线等值电容的衰减特性。
The Characteristic of middle impedance relay was elaborated, as an example of bus differential protection of RADSS type.
以RADSS型母线差动保护为例，阐述了中阻抗型差动继电器的原理特点。
Protection of bus-tie circuit breakers: long time delay overcurrent and instantaneous overcurrent.
汇流排联络断路器保护：长延时过流、瞬时过流保护。
Three common power bus ESD protection structures in CMOS IC were discussed, the circuit structure and working theories were analyzed, an improved power bus ESD protection structure was put forward.
讨论了三种常见的CMOS集成电路电源总线esd保护结构，分析了其电路结构、工作原理和存在的问题，进而提出了一种改进的ESD保护电源总线拓扑结构。
The principle scheme aimed at one and a half circuit breaker model is presented based on basic principle and criterion of bus-bar protection.
在行波母线保护的基本原理和动作判据的基础上，给出了对应一个半开关接线方式的原理方案。
This paper describes the principle of bus 1000 high speed static busbar differential protection device and the experience gained in commissioning test of the device.
本文分析了BUS 1000型高速静态母线差动保护装置的基本原理和调试后的几点体会。
STD bus embeded computer based general numerical protection system is presented here.
本文介绍了一种基于STD总线工控机的主设备保护通用系统的构成。
The article also describes some important problems for hardware design, then it provides the method, such as error control, bus insulation, invalidation protection and electromagnetism interfere.
文中还提出了差错控制以及硬件设计中总线隔离、失效保护、电磁干扰问题等几个要注意的问题及解决方法。
Polomarconi Telsa SpA scope of products is on-board antenna for metro, bus, EMU and high speed train. The antennas with embedded amplifier and high voltage protection.
波罗马康尼产品包括用于地铁、巴士、动车和高速列车的车载天线，合路器及滤波器。天线内置放大器和高压保护。
In view of that, this paper puts forward a kind of distributed middle voltage busbar protection scheme based CAN bus.
为此，提出了一种基于CAN总线的分布式中低压母线保护方案。
Host computer communicates with the monitor unit and the protection unit of LCUs through the CAN bus. PLC in LCU communicates with host computer through the RS-485 port.
主控计算机与各lcu中的监控单元和保护单元通过CAN总线通信，LCU中的PLC通过RS- 485接口与主控计算机通信。
In course of motor starting after no-voltage bus, a malfunction fault of motor differential protection was analyzed.
分析了一起母线失电后快切装置动作时电动机起动过程中差动保护的误动事故。
Aimed at the problems of relay protection during charging test of the buses, a new method of intelligent bus-charging protection is presented in this paper.
针对当前母线充电试验时继电保护中存在的一些问题，提出了一种智能型的母线充电保护新方法。
应用推荐