The bus connection: King City Plaza in the city by bus to get off, that is, to.
乘车路线：市内乘公交车到王城广场站下车，即到。
Based on a T-bus connection system, the components are hot-swappable and allow easy system expansion.
基于T -总线的连接系统，其部件都是很容易扩展的热交换部件。
I'm using GLib to manage the bus so that I don't need to deal with the details of the bus connection myself.
我使用Glib来管理总线，以使得我不需要自己来处理总线的连接细节。
In only 7 minutes you can reach Zurich's city centre by commuter train, or in 20 minutes by the direct public bus connection.
搭乘火车抵达苏黎世市中心只要七分钟，或者搭乘直达公交车20分钟可抵市中心。
When the cover board and door are opened for them entry into other parts of switchboard, the main bus and bus connection should not be exposed.
当盖板和门为进入配电盘其它部分而打开时，不应暴露主要母线和母线连接。
By the reform of the main bus connection, we should pay attention to the change of operation mode, reconsider the bus protection scope, and edit the operation rules.
主接线方式变更后，要关注运行方式的变化，重新考虑母差的保护范围，修编倒闸操作规程。
While designing the main bus connection, we should in consideration of the possibility of the extension, and reduce the influence to the power supply as far as possible.
在设计变电站主接线时要考虑到扩建的可能性，尽量减少对供电的影响。
In any event, I had already walked out of the domestic terminal and into the clammy night before I realised that the transit bus connection was actually inside the terminal.
不管怎样，到我出了国内航站楼来到孟买湿热的夜空下，我才意识到穿梭巴士实际上在航站楼里面。
The steps below describe how to create a bus, then a queue connection factory, the actual queue as well as activation specification of the queue.
下述步骤介绍了如何创建一个总线、一个队列连接工厂、实际队列以及队列的激活规范。
The simplest way of getting the data from the Arduino is with the unit connected directly to a host computer Universal Serial Bus (USB) interface, reading the data as if it were a serial connection.
从Arduino获得数据最简单的方式是让此单元直接连接到主机计算机的UniversalSerialBus (USB)接口，像串行连接那样读取数据。
The main function creates a Glib event loop, gets a connection to the session bus, and integrates the D-BUS event handling into the Glib event loop.
main函数创建一个Glib事件循环，获得会话总线的一个连接，并将D -BUS事件处理集成到Glib事件循环之中。
To access the service from the JMS API, you must create the JMS destination and connection factory and point to the correct SIBus destination and bus.
要从JMSAPI访问服务，您必须创建jms目的地和连接工厂，并指向正确的sibus目的地和总线。
This channel will be the connection used to receive messages into the bus from WebSphere MQ.
该通道将成为用于从WebSphereMQ到总线接收消息的连接。
Something I am frequently asked about is how to use the application identity to authenticate a JMS connection to the service integration bus. Those who ask usually do so for one of two reasons.
经常有人问我该如何使用应用程序标识来对到服务集成总线的JMS连接进行身份验证。
Most of the code is self-explanatory: a connection to the bus is obtained, and the service com.burtonini.dbus.SignalService is registered.
代码大部分是不言而明的：获得一个到总线的连接并注册com . burtonini . dbus . SignalService服务。
The only connection you can make with this device is a slave connection on the OPB; click in the leftmost white bus square to establish this connection (a lowercase 's' will appear in the box).
用这个设备能实现的唯一连接就是在OPB上的从连接；请在最左侧的空总线框中单击，建立此连接(框内会出现一个小写的“s”)。
Now that we have the destinations and the bus, you can create the connection factories, the JMS queues, and the activation specifications.
拥有目的地和总线后，您可以创建连接工厂、jms队列和激活规范。
This channel will be the connection that is used to send messages from the bus to WebSphere MQ.
该通道将成为用于将消息从总线发送到WebSphereMQ的连接。
The WebSphere MQ link receiver channel enables a sender channel within a WebSphere MQ queue manager to establish a connection to a messaging engine within the service integration bus.
WebSphereMQ链接接收方通道支持WebSphere mq队列管理器内的发送方通道，以建立到服务集成总线内的消息传递引擎的连接。
USB port features easy operation, fast speed, convenient bus supply power, flexible connection and multiple transfer modes etc.
USB接口具有使用方便、速度快、总线供电方便、连接灵活和传输模式多等特点。
In the part of net working building, RS485 bus is used to connect several instruments, and RS232 is used to connect the computer to 485 bus, then the whole system connection is realized.
在仪表组网部分，采用RS485总线实现多台仪表之间的互联，采用RS232实现上位机与485总线控制器之间的连接，最终实现整个系统的组网。
Do not use twisted pair, is extremely wrong. 485 bus must be hand in hand type bus structure, resolutely eradicate star connection and branch connection.
不选用双绞线，是极端过错的。485总线一定要是手牵手式的总线结构，坚决根绝星型连接和分叉连接。
The communication between host computer and subsystems USES USB (Universal Serial Bus) that insures real-time, high speed and convenient connection of the system devices.
各系统和主机之间采用USB总线连接的方式进行通讯，既可以保证通讯的实时性、高速性，又使得主机和设备之间的连接更加方便。
The EMO EIB was the first electromotive actuator with direct connection to the European installation bus.
EMOEIB是第一种电动机驱动的执行机构，可直接连接在欧洲标准安装总线上。
This paper describes the features and structure of CAN bus and based on it's principle, gives the connection of each protection unit with the system computer.
本文叙述了CAN总线的特点及结构，并运用CAN通信总线的原理，实现各保护单元与系统机的连接。
The connection between can bus and Ethernet can be realized with MC68HC05X16 microcomputer integrated can communication controller and RTL8019AS Ethernet controller.
采用集成CAN通信控制器的MC68 HC 05x16单片机和RTL8019AS以太网控制器可实现CAN与以太网的连接。
The feed for the power contacts has no connection to the voltage supply for the Bus Coupler.
进料为电触头具有到电压源的总线耦合的连接。
The level (upright) bus and its connection system, functional compartment and meter measure cell, ventilation system in the mix unit were expounded respectively.
对柜中水平(垂直)母线及其连接系统、功能隔室及表计测控室、通风散热系统分别进行了阐述，并采取措施加强柜体结构强度。
Several kinds of non-wastage connection bus bars, which are being developed, will also be substituted for imported materials and put into use in upgrading electric cabinet.
正在开发的几种无损连接母线，也将取代先进口材料，用于更新换代的新型电柜。
The connection between the host and the slave intellectual meters is the CAN field bus net communication block SJA1000, and the meters as slave are placed on the industry spot.
采用CAN总线网络通信模块SJA1000实现监控主站与底层智能仪表的连接，而仪表作为从站放置在现场。
应用推荐