Various physical changes are possible, including increased body fat; reduced muscle bulk, strength and endurance; and decreased bone density.
体格也可能发生各种变化，如身体变胖、肌肉减少、力量和耐力减弱骨骼密度降低。
She pointed to Hareton, the other individual, who had gained nothing but increased bulk and strength by the addition of two years to his age: he seemed as awkward and rough as ever.
她指着哈里顿，这就是另一个人，他长了两岁什么也没改，就是粗壮些，更有力气些：他跟从前一样拙笨和粗鲁。
Bulk density of small materials, heat conduction tear your eyes coefficient is generally small, but at the same time decreases in the mechanical strength, so be reasonable choice.
容重小的材料，一般导热泪盈眶系数也小，但同时机械强度也随之降低，故要合理选择。
The effects of different temperatures on compressive strength and bulk density were studied.
主要探讨了不同的烧结温度对试样的耐压强度和体积密度的影响。
Vacuum Forming ceramic fiber blanket in addition to bulk ceramic fiber cotton with a fine performance, but also has good strength and flexibility, is a multi-functional products.
陶纤真空成型毡除具有散状陶瓷纤维棉的优良性能外，并具有良好的强度和弹性，是一种多功能的产品。
Weaknesses: Lack of bulk and strength are concerns. Athleticism seems decent but little more. Not a great shooter.
缺点：缺乏身体的强度和力量。身体很好，但还不够，不是一个很好的投手。
Normally for bulk glass, etching increases the strength.
对于块状玻璃，腐蚀通常都使强度提高。
For extrudates there are side crushing strength tests, bulk crushing strength tests, abrasion tests.
对挤条产品有侧压强度的测试，堆积强度测试和耐磨测试。
Bulk metallic glassy alloys have almost theoretical high strength, excellent wear properties, good forming ability and thermal stability in the supercooled liquid region.
块状金属玻璃合金作为一种新型材料，具有高强度、良好的耐磨性能以及在过冷液态区内良好的加工成型性能和热稳定性。
The result shows that the compressive strength at normal temperature of impregnated samples is raised in varying degree, their bulk density is increased and the porosity is decreased.
制得高强度耐火粘土砖的试验结果表明：浸渍处理后的试样，常温耐压强度均获得了不同程度的提高，体积密度增加，气孔率下降。
In the experiment using corundum aggregate, the specimens prepared with high ferric oxide brown corundum aggregate has the highest bulk density and strength.
在使用刚玉骨料的试验中，采用高铁棕刚玉的试样的体积密度和强度均最高。
It has good properties such as, high inversion rate, good activity, small water demand, good fluidness, high bulk density, excellent thermal strength etc.
产品具有转相率高、活性好、用水量小、流动性好、体积密度高、热态强度优良等特点。
This paper mainly presents that constructional mid-carbon alloy steel, after bulk moulding deformation, heat treatment and cold surface deformation can raise fatigue strength of materials effectively.
本文主要介绍中碳合金结构钢经整体塑性变形、热处理后再进行表面冷变形工艺是提高材料疲劳强度的有效途径。
The testing results indicate that nanosized particles are uniformly located within bulk nanoplastics, and laser powers can strongly affect the HRL and notch impact strength of nanoplastics.
试验结果表明，纳米粒子均匀地分散在纳米塑料中，激光功率对纳米塑料的洛氏硬度及缺口抗冲击强度有显著影响。
The porosity, bulk density and cold crushing strength of the refractory samples were determined.
讨论了气孔率、体积密度和常温耐压强度与电熔氧化镁加入量之间的关系。
The influence role of red mud bulk percentage, composite moisture percentage, lime quantity and additive for pavement basic level strength has been discussed in this paper.
探讨了赤泥的大块率、混合料含水率、石灰剂量以及外加剂对路面基层强度的影响规律。
The influence of alumina addition on the bulk density, mechanical strength, activity and thermal stability of high temperature shift (HTS) catalyst was studied in laboratory.
实验室研究了添加氧化铝对中温变换催化剂堆密度、机械强度、活性和热稳定性的影响。
The bonding strength is as strong as that of bulk silicon.
硅片键合强度达到了体硅的强度。
The viscosity, bulk and adhesive strength were tested.
测试了胶粘剂的本体强度、粘接强度和粘度。
With the increase of sintering temperature, the apparent porosity of sample decreases, while bulk density, hardness and compressive strength increased.
随烧结温度的升高，材料的显气孔率降低，而体积密度、硬度和抗压强度均增加。
Then, the compound method is used to assess the hull girder ultimate strength reliability of a bulk carrier subjected to extreme bending moments.
最后，基于极限强度，将该组合方法用于评估散货船在极值弯矩作用下的船体梁安全性。
Another year of feeding at sea may give him the bulk and the strength to win his own domain.
另一年的喂养在海洋可能给它大部分和力量去赢得他自己的领地。
The results show that the porosity and water absorption decrease and the bulk density and bending strength increase, along with the sintering temperature raising and the time prolonging.
结果表明：随着烧结温度的升高和保温时间的延长，气孔率和吸水率减小，体积密度和弯曲强度升高；晶粒长大填充气孔，使多孔材料孔隙率下降而强度增加。
The laying technology of reinforced concrete base of high strength and large bulk is introduced by a building example.
通过某一具体工程实例，介绍了在高温气候条件下对高强度大体积的建筑基础进行混凝土浇筑的技术方法。
In the bulk system, tensile strength, tensile modulus and impact strength are improved by 32.2%, 60.3% and 68.6%, respectively, without the loss of light transmittance.
而本体法复合材料的拉伸强度、拉伸模量及冲击强度值最大分别提高了32.2％、60.3％和68.6％，而透光性能基本未受影响。
Through the analysis of mechanical properties of the specimens, the relationship between the fracture strength and bulk density was characterized in a linear equation.
通过对试样力学性能的分析可知，推导出了材料断裂强力与体积密度的关系式。
The rupture in the middle of bulk cargo is due to the corrosion and fatigue of components in long term usage, which leads the section modulus to reduce and the general longitudinal strength to weaken.
船舯断裂的主要原因之一是船体构件因长期受到腐蚀、疲劳等作用而造成船舯剖面模数降低，进而削弱了总纵强度。
The rupture in the middle of bulk cargo is due to the corrosion and fatigue of components in long term usage, which leads the section modulus to reduce and the general longitudinal strength to weaken.
船舯断裂的主要原因之一是船体构件因长期受到腐蚀、疲劳等作用而造成船舯剖面模数降低，进而削弱了总纵强度。
应用推荐