This paper deals with the way to speed up the driver, program of Chinese on general dot printer by applying the technology of buffer output and Chinese library schedule.
本文讨论了怎样使用缓冲输出技术与字库调度技术，提高普通点阵式打印机汉字驱动程序的速度。
From that point everything is similar except you will need to flush the output stream or it is possible that the last bit of the stream buffer will not be sent.
从这一点来说，除了您将需要清空输出流(否则流缓冲区的最后一位可能会未被发送)之外，一切都很相似。
The SPE program reads in the input buffer, processes the data, and then writes it to the output buffer.
SPE程序从输入缓冲区中读取数据，然后对数据进行处理，再将结果写入输出缓冲区中。
A wide variety of tasks can be performed prior to performing a forward, but no response headers can be set by the forwarding component and no content can be sent to the output buffer.
在转发之前可以执行很多类型的任务，但是要转发的组件不能设置响应头部信息，也不能有内容发送到输出缓冲区。
Users can stream the output data into a string, an internal buffer, the standard output, or a file.
用户可以使这些输出数据流入字符串、内部缓冲区、标准输出或文件。
Depending on trace volume, buffer size, and the bandwidth of the output device, multiple buffers might be allocated to a given thread to keep pace with trace data that is being generated.
根据跟踪量、缓冲区大小和输出设备的带宽，可以将多个缓冲区分配给给定的线程，从而与生成跟踪数据的速度相匹配。
The format of the output buffer is defined by the 5th parameter (format name).
输出缓冲区的格式由第五参数(格式名称)定义。
This produced no output, because the "d" command zapped every single line in the pattern buffer!
这不会产生输出，因为“d ”命令除去了模式缓冲区中的每一行！
This command USES the klogctl system call to read the kernel ring buffer and emit it to standard output (stdout).
这个命令使用klogctl系统调用来读取内核环缓冲区，并将它转发到标准输出(stdout)。
You may display the kernel ring buffer using the dmesg command, which displays these messages on standard output.
可以使用dmesg命令显示内核环缓冲区，会在标准输出上显示这些消息。
The readfile function dumps the entire contents of a file or Web page to the default output buffer.
readfile 函数将把文件或Web页面的全部内容转储到默认的输出缓冲区。
The format of the output buffer is defined by the 3rd parameter (format name).
输出缓冲区的格式由3rd参数(格式名称)定义。
CLPPlus supports printing of DBMS_OUTPUT message buffer contents onto the CLPPlus console using server output facility.
CLPPlus支持使用服务器输出工具打印dbms_out PUT消息缓冲内容到CLPPlus控制台上。
Now that you have the unpacked values from the binary buffer that you read, you can use the standard print commands to get the output necessary.
现在您已从读取的二进制缓冲区获得了拆包的值，那么您可以使用标准的print命令来获得必要的输出。
The buffer size of the response is also set, and the output stream is retrieved from the response in the out variable.
响应的缓冲区尺寸也进行了设置，输出流也从out变量的响应中得到。
The put command sends back the contents of the output buffer, but the return statement at the end of main also sends back data; the status generated will be passed back to the PPE.
PUT命令会发回输出缓冲区的内容，但是main末尾的返回语句也会将数据发送回去；所生成的状态会发回给PPE。
If you include a precision specifier for a string output (such as "%.10s"), then you can protect against buffer overflows by specifying the maximum length of the output.
如果指定字符串输出的精确指定符(比如%. 10s)，那么您就能够通过指定输出的最大长度来防止缓冲区溢出。
Note that kernel output goes to the kernel ring buffer and not to stdout, because stdout is process specific.
注意，内核的输出进到了内核回环缓冲区中，而不是打印到stdout上，这是因为stdout是进程特有的环境。
Beyond the interactive shell you can open, you can also run a Python buffer, with the output appearing either in the interactive shell or in a new buffer (to save for later, perhaps).
您除了可以打开交互式的shell之外，还可以运行一个python缓冲区，以使输出或者显示于交互式的shell中，或者存入新的缓冲区中(以后也许会保存)。
The xev output is nonbuffered, which leads to seldom-used windows not filling the output buffer at a fast-enough rate.
xev输出是非缓冲的，这会造成较少使用的窗口无法以足够快的速度填充输出缓冲。
Then the data is copied by the kernel into the kernel buffer associated with the output socket.
然后由内核将数据拷贝到与输出套接字相关联的内核缓冲区。
The simplest usage is to have the SPE program take two Pointers: one for an input buffer and one for an output buffer.
最简单的用法是让SPE程序使用两个指针：一个用于输入缓冲区，另外一个用于输出缓冲区。
The output of each program is then pasted back into the buffer, replacing the original contents.
然后将每个程序的输出粘贴回缓冲区，替换原有的内容。
(buffer pool size in the db2exfmt output is discussed further in the buffer pool size section below.).
db 2 exfmt输出中的缓冲池大小将在下面的缓冲池大小一节中进行进一步的讨论。
The input bit rate and the output frame rate of video decoder is fix, so a Rate Buffer is needed to balance this rate difference.
而经解码后显示的侦速率是恒定的，这就要求在解码端有一个缓冲器来实现输入码率与输出码率间的过渡。
We will be using the options -m, which displays the values in megabytes, and -o, which suppresses buffer information, allowing a more readable output.
我们将使用- m选项，该选项以兆字节为单位显示值，还有- o选项，该选项忽略缓冲区信息，以便显示更多的输出。
This method relies on the FileStream class to buffer the input and output files appropriately, so that the code can work byte by byte to perform the necessary processing.
该方法依靠FileStream类来适当地缓冲输入和输出文件，以便代码可以逐个字节地执行必要的处理。
The output shows that the BANK database has a single buffer pool (IBMDEFAULTBP) defined, which has 250 pages (NPAGES) with a 4096-byte page size (PAGESIZE).
输出显示BANK数据库定义了一个缓冲池(IBMDEFAULTBP)，该缓冲池具有250个页面(NPAGES)，每个页面大小(PAGESIZE)为4096字节。
All output is flushed while all input is buffered. Each object contains its own input buffer.
所有的输入在缓冲的同时所有的输出都将被清空，每一个对象都有自己的输入缓冲。
This limiting amplifier composed of an input buffer, amplifier cells, output cells, and offset cancellation circuit.
此限幅放大器由输入缓冲、主放大单元、输出缓冲、偏置补偿电路四部分组成。
应用推荐