At last, the energy of the bubble formation frequency band was compared with the bubble model which shows the reliability of the analysis methods mentioned above.
将气泡生成脉动能量与气泡模型进行比较，结果再次论证本文分析方法的可靠性，本文的研究工作为稠密气固两相流动的研究揭开了一个崭新的篇章。
Within this model both speculators and their lenders use interest-only mortgages (IOs) rather than traditional mortgages when there is a bubble.
当存在泡沫时，这种模式下的投机者和贷方都宁可使用仅付息按揭（IOS)而不是传统按揭。
Rockery model manufacture can use bubble about the shape of a rockery, generally, only large rockery to demand manufacturing rockery model.
假山模型制造能够用泡沫制造一个假山的大约形状，通常情况下，只需大型假山才需求制造假山模型。
These results will provide experimental bases for the establishment of bubble movement model in hot-compaction process.
该研究结果将为热压成型过程中气泡运动模型的建立提供实验依据。
These results will provide the basis for establishing the bubble movement model in the hot-compaction process.
该研究结果为热压成型过程中气泡运动模型的建立提供了实验依据。
Analysis of bubble motion in the flow field was used to develop relations for the viscous stresses, turbulent stresses, and interfacial momentum exchange to close the model.
通过对气泡在流场中的运动和受力分析，给出了用以封闭模型的粘性应力、脉动应力、相间动量交换项的表达式。
This paper studied and established the mathematical model for bubble growth in polymer during microcellular foaming, for controlling the cells size and their distribution.
研究、建立了聚合物微孔发泡过程中的气泡成长数学模型，以控制发泡过程中的泡孔尺寸大小和尺寸分布。
Based on characteristics of historical bubble events, this paper presents a hybrid-rational model of speculative bubbles.
本文根据历史泡沫事件的特征，提出了一个投机泡沫的混合理性模型。
Then physical and mathematical model of the gas-liquid two phase flow which was actuated by the bubble in the pool, were proposed and solved numerically.
在此基础上建立池内有气泡驱动情况下气液两相流动传热的物理数学模型，并进行相应的数值求解和分析。
This model took into account of the effect of the column wall on bubble formation by the introduction of a specific system of images.
通过引入一特定的镜像系统，该模型将气泡塔壁对气泡生成过程的影响考虑在内。
As also happened in Japan, that growth model has led to the buildup of stress points in the domestic economy: a bubble in the real-estate sector and bad loans in the Banks.
这样的情况同样曾发生于日本，这种经济增长模式导致将着力点放到国内经济上，由此带来房地产泡沫和银行的坏账问题。
The mass transfer force concept was used to develop a model for the heat and mass transfer from a single superheated bubble rising in the water pool.
该文从传质推动力角度出发建立了高温气泡在水中上升过程的传热传质模型，计算结果与文献报道的实验数据、模拟结果基本吻合。
Resorting to signal filter principle, the model even could estimate how much bubble exist in the price. The main academic contributions are provided as follows.
借助信号滤波器原理，我们甚至可以利用该模型估计出股票价格中泡沫的含量。
The simulation results show that local voidage calculated by bubble and emulsion model is observably lower in the bubble nose region, compared with that calculated by area weighted averaging.
模拟结果表明：气泡乳相模型在气泡鼻区域计算的局部空隙率显著低于面积加权平均法的计算结果，因而在该区域能较大幅度地修正曳力。
It is based on the physical model of exhausted gas bubble and numerically simulates the entire flow field by coupling calculation of the water field and gas field.
计算采用燃气泡物理模型，通过水流场和气流场的耦合计算模拟整个流场的形态。
A more detailed multi fluid model was developed with the gas phase divided into several groups according to bubble size to describe bubbly flow in a vertical pipe.
根据气泡的尺寸划分气相，采用时间平均法建立了描述垂直管道内层流泡状流运动的多流体模型。
The effects of cavitation have also been taken into account by using a bubble two phase mixture model.
采用气泡两相混合介质模型研究空化现象。
Although no longer apparent on the chart because of the dynamic nature of the model, the sell Side Indicator gave sell signals leading up to the bubble.
虽然由于该模型的动态特点而在图上不再明显，但是买方指标发出各种泡沫的销售信号。
Secondly, the paper establishes evaluation index system and measure model of real estate bubbles, in order to found whether there is an empirical analysis of the bubble from 2000 to 2008 in China.
其次，本文建立了房地产泡沫的评价指标体系和房地产泡沫测度模型，对我国房地产市场自2000年到2008年这一段时期内是否存在泡沫进行实证分析。
Images of bubble movement in a water model of slab continuous casting mold were acquired by a high speed video camera and processed by image processing software.
使用高速摄像仪采集了板坯连铸结晶器水模内气泡运动的图像，对图像进行了数字处理。
When the second derivative of the bubble number in unit bed volume with respect to gas velocity equals zero, the flow regime transition occurs. The model fits fairly well with the experimental data.
导出了当单位床层体积中气泡数目对气速的二阶导数为零时发生流型转变，该模型的计算机结果与实验数据吻合良好。
A model of five-bubble-stirred-tank reactor (BSTR) for industrial uncatalyzed oxidation process of cyclohexane was established to predict and optimize the the industrial production.
论文针对环己烷液相无催化氧化的五釜串联鼓泡搅拌反应器生产装置(BSTR)，建立了氧化装置的过程数学模型。
A mathematic model of foam fractionation was set up based on the following assumptions: adsorption equilibrium, same bubble size and regular dodecahedron model of real bubbles.
前言：假设吸附过程始终处于平衡态、气泡大小均一以及每一个气泡均为正十二面体，构建了泡沫分离过程的数学模型。
The shrinkage bubble dynamics model can gain the relations of the bubble internal pressure, the outer radius of the hydrate and the bubble radius with the time during the whole reaction time.
缩泡动力学模型能得到整个反应时间内的气泡内压、水合物外层半径和气泡半径与时间的关系。
A model for the rise velocity of a single deformed bubble in liquid solid fluidized beds was formulated, based on the analysis of the forces acting on a bubble.
以气泡在上升运动过程中的受力分析为基础，建立了描述单个变形气泡在液-固流化床中上升速度的理论模型。
In this paper on the basis of the classical bubble dynamics, a new model is brought forward for the bubble growth in a nucleation boiling system-the comprehensive interface model.
本文在经典汽泡动力学理论基础上，提出了描述汽泡生长过程的综合界面模型。
A filling model about an embryo bubble was proposed to describe structure of a cluster, and the order parameter was further analyzed.
应用胚泡的填充模型对团聚的结构问题进行了分析，并进一步提出团聚序参量的结构。
A model of the boiling bubble was presented based on the bubble dynamics.
根据汽泡动力学原理，建立了壁面上沸腾汽泡的数学模型。
A model of the boiling bubble was presented based on the bubble dynamics.
根据汽泡动力学原理，建立了壁面上沸腾汽泡的数学模型。
应用推荐