Experimental comparison was also made between the continuous bubble method and the intermittent bubble method of diazomethane.
对重氮甲烷连续鼓泡法和间断鼓泡法进行了试验对比。
The average pore size calculated by the above - mentioned way differs from that calculated by conventional gas bubble method, and the result has been dis-cussed.
分析了中流量孔径计算方法和普通气泡法计算的平均孔径之间的差别。
In this paper, the variable processes of the steady flow moving around rotating circular cylinder are visualized by the hydrogen bubble method with two cross wires.
本文对交叉布置的两根丝产生氢气泡的方法显示流谱作了探索，并对旋转圆柱绕流的变化过程进行了流谱显示。
The commonly employed approaches include vacuum low-temperature heating, liquid nitrogen method, capsule method, flavor pairing method, bubble method, decomposition method, and so on.
其常用的方法有真空低温加热法、液氮法、胶囊法、风味配对法、泡沫法、分解法等。
Pore structure and its effects on flowing ability, production effect and reservoir evaluation are investigated with constant rate mercury injection apparatus and maximum bubble method.
因此，本文利用先进的恒速压汞仪和最大气泡法研究低渗透储层的孔隙结构，开展了孔隙结构对油藏的渗流能力、开发效果、储层评价影响的研究。
This paper mainly discussed about the research on microbubbles generation by metal microporous tube, it is a new method of bubble formation.
本文主要研究了用金属微孔管制造微气泡，这是一种比较新颖的气泡制造方法。
The traditional bubble sort is a simple and applicable information processing method, but is not effective in operating the file, in which some records have been sorted beforehand.
传统起泡排序是一种简单实用的信息处理方法，但它对事先已基本有序的文件进行操作时却不是高效的。
By use of hydrogen bubble visualization method, flow evolutions are studied in an artificially excited transitional boundary layer on a flat plate.
利用氢气泡流动显示方法，研究人工激发条件下平板边界层转捩的流动现象。
Wake is motive bubble film, research of motive bubble is basis of Wake research. Using digital image process technology is a fire-new detection and analytic method.
运动气泡的研究是尾流研究的基础，利用数字图像处理技术研究运动气泡幕是一种全新的探测分析方法。
A method of measurement of bubble diameter in the prism is given. The measured diameter direction is incident laser beam direction.
提出一种测量固态透明物质中气泡直径的方法，所测气泡直径的方向应为入射激光束的方向。
This paper puts forword a method of collecting ammonia in the air of workshop by silicagel tube replacing the big bubble collection , and analyzing quantitavely with Nashi - colorimetry.
本文提出了利用硅胶管代替大气泡采集车间空气中的氨和纳氏比色法定量分析的方法。
In the paper, the bubble level most in use is explained for its basic construction and measuring principle, and the adjusting method under conditions in laboratory.
本文介绍了常用气泡水平仪的基本构造和测量原理。并且介绍实验室条件下对水平仪的调校方法。
The paper brings forward new bubble boundary identification method for High resolution bubble image, which can automatically receive bubbles closed boundary.
对于清晰的高分辨率气泡图像，本文提出了一种新的气泡边界识别方法，能够自动地得到气泡的闭合边界。
With the consideration of surface tension the boundary integral method and numerical solution method for simulation of a cavitation bubble collapsing near a rigid wall are derived.
导出了考虑表面张力影响下模拟固壁附近溃灭空化气泡特性的边界积分方法及数值求解方法。
Through the experiment finds that the bubble array can be caused by the series pulse deflective field, and gives out its formation rules. it is provided a method for the bubble array forming.
实验发现系列脉冲偏场能形成磁泡点阵，并给出了其形成规律，为磁泡点阵的形成提供了一种方法。
Compare with traditional method of motive bubble detection and analysis, it has some advantages, such as visibility, real time, high-efficient, easily realized in projects, and so on.
它与传统的运动气泡探测分析方法相比，具有直观、实时、高效、易于工程化等优点。
The influences of wall on the frequency response of the bubble and the turbulent intensity of the bubble motion have been analyzed through frequency spectrum analysis method.
通过频谱分析，考察了壁面的存在对空泡频率响应特性和湍强度等方面的影响，并与壁面对固体颗粒运动的影响进行了比较。
A short-term prediction method developed on the basis of the deterministic chaos theory is used to predict the time series of pressure fluctuations in a gas-liquid bubble column with a single orifice.
应用混沌预测方法，对气液两相单孔鼓泡系统的压力波动时间序列进行了短期预测。
Focusing on image measurement method for bubble in multiphase flow, theoretical and experimental studies have been made in this paper systematically and comprehensively.
本文围绕掺气多相流中气泡的图像测量方法进行了系统而深入的理论和实验研究。
Introduce a method of identify bubble in glassware based gradation graph.
介绍一种利用灰度图像识别玻璃瓶气泡的方法。
Chemical bubbling method is adding bubbling agent into raw material, making the agent reacting with the materials to produce gas and therefore forming small bubble in the brick.
化学发泡法制备隔热耐火砖是将发泡剂直接拌入原料中，使其发生化学反应产生气体，在砖内形成小气泡。
The results show that the force coefficients and separation bubble are periodic, which indicates the method is correct and feasible.
计算结果表明：气动力系数及分离泡呈规则的周期性变化，证明方法是成功的、可行的。
Besides, the TG, XRD, SEM and Bubble-pressure method were employed to characterize structure and properties of carbon membranes.
并借助于热重分析TG、X射线衍射XRD、扫描电镜sem、泡压法等分析手段对得到的煤基炭膜的结构性能进行表征。
The radius period of oscillation of the bubble and the water pressures are calculated numerically with Runge-Kutta method. The calculating results are unanimous with that of experiments.
采用龙格-库塔数值方法计算了气泡脉动半径、周期及水中压力，计算结果与实测数据吻合较好。
In situ bubble stretching (ISBS) method was discussed and analysis of the dispersion process of inorganic additives in polymers was performed using this method.
探讨了利用原位气泡拉伸法(ISBS法)分散添加在高聚物中的纳米无机添加物的分散机理。
This invention relates to the architecture material field, which are a natural stone material bubble concrete compound lightening decorative panel and its processing method.
本发明涉及建筑材料领域，具体说是一种天然石材泡沫混凝土复合轻质装饰板及其生产工艺方法。
Used high-speed video camera visualization method, investigated the subcooled boiling heat transfer and bubble behaviors in narrow rectangular channel in high pressure for the first time.
首次在较高压力下，使用高速摄像手段对垂直向上矩形窄缝流道内的过冷沸腾及汽泡行为进行了可视化观察。
The method features reduced bubble formation within the edging fold and also within the sealant (where present) that seals the edging-fold seam.
该方法的特征在于在折边咬口中减少的气泡形成以及必要时存在的将折边咬口缝密封的密封剂。
At last, a new method named bubble maximum pressure is advanced to measure the inner diameter of micropipette, furthermore, the experiment data are analyzed to some extent.
论文最后采用“气泡最大压力法”测定出微针内径，同时对实验结果进行了一定的分析和总结。
At last, a new method named bubble maximum pressure is advanced to measure the inner diameter of micropipette, furthermore, the experiment data are analyzed to some extent.
论文最后采用“气泡最大压力法”测定出微针内径，同时对实验结果进行了一定的分析和总结。
应用推荐