The key problem of design of inertia brake test RIGS is the simulation of inertia load.
惯性制动器试验台设计的关键问题是惯性负载的模拟。
In this paper, the principle of load simulation and the basic structure of the brake test rig are expounded.
本文阐述了该种制动器试验台的模拟载荷原理及其基本构造。
Brake test stand to check if there is more convenient to see which small wheel braking force, the wheel is bad.
如有制动试验台检查更为方便，看哪个车轮制动力小，即为不良的车轮。
The purpose of this thesis is to improve the GEC electrical cabinet of the Aircraft Tyre Wheel and Brake Test Dynamometer.
本论文的研究目的是对某航空机轮刹车试验台的电气控制柜(简称GEC柜)进行技术改造。
The purpose of this thesis is to improve the GEC electrical cabinet of the Aircraft Tyre Wheel and Brake Test Dynamometer.
本论文研究的内容来自于某航空机轮刹车试验台的二期技术改造项目。
Correctness of calculating method and calculating result are verified after brake test is carried out on substantial sample vehicle.
通过对实际样车进行的制动试验，验证了计算方法和计算结果的正确性。
Combine with vehicle model, simulate ABS brake test with single attachment coefficient road and variable attachment coefficient road.
结合车辆模型熏对单一附着系数路面和变附着系数路面进行了ABS制动模拟试验。
The experiment result has shown that the control strategy of the brake test bench works well, and it is in full compliance with the control requirements.
实际现场调试结果表明，该制动器试验台控制系统效果良好，完全符合控制要求。
Using the theory of rigid rotation and combined with the thought mathematical model established, this paper analyzes the control method of the brake test.
本文利用刚体转动理论结合数学模型建立的思想对制动器试验台的控制方法进行分析。
According to theoretical calculation and test results in 1: 1brake test rig, it proves that the brake shoes may meet the brake needs ofDF8B diesel locomotive.
通过理论计算和1：1制动试验台试验，证明该闸瓦完全能满足东风8B内燃机车的制动要求。
Disc-brake test rig is testing the quality and performance of the brake equipment manufacturers, is the indispensable important experiment device of the brake company.
盘式制动器检测试验台是检测制动器质量和性能的设备，是制动器生产厂家不可或缺的重要实验装置。
By analyzing traditional automobile brake performance tester, the paper pointed out the deficiency. Then, the author designed and applied the dimension dynamic plate brake test system.
通过对传统的汽车制动性能检测设备的分析，指出其不足之处，据此设计了三维动态平板式制动检测系统，并首次将三维传感器应用于汽车制动性能检测中。
Nearly all the subjects took longer to brake while multitasking and scored lower on the test.
在一心多用的情况下，几乎所有参与者在刹车时的反应时间都延长了，而且在数学测验中的得分也更低。
Inspect and test mechanical units, such as engines, transmissions, axles and brake systems, to locate faults and malfunctions.
检查和测试机械单位，如发动机，变速器，车桥及制动系统，以确定故障和失灵位置。
Original precision version, for special car. We continuously test in carpet appearance, constantly updated product, so as to no stuck clutch and brake block.
原装车精准版型，专车专用，在整形外观上不断进行试验，不断的更新改进产品，不卡离合器和刹车挡。
This standard specifies the classification of automotive brake linings, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage, etc.
本标准规定了汽车用制动器衬片的分类、技术要求、试验方法、检验规则、标志、包装、运输与贮存等。
Test the brake of brake, rope-break protection safety instrument, change it when it's worn or broken.
检查制动、断绳保护安全装置的制动瓦，当出现过量磨损或碎裂时必须更换。
Based with AT89S8252, a test bench was designed to examine the performance of leaking of the air brake Chambers. This device was equipped with USB interface.
以at89s8252单片机为处理器，针对膜片式双腔制动气室，开发了一种具有USB接口的、测试制动气室漏气状况的自动试验台。
The simulation test method and assessment technique of parking brake assemblies on the bench are discussed in this paper, the approach for improving the performance of parking brake is also proposed.
探讨了在台架上进行驻车制动器总成的模拟试验方法和评定技术，提出了改善驻车制动性能的途径。
The shaft must test in bearings, may be started by a clutch or stopped with a brake.
在轴承中的轴必须经过检测，轴可以由离合器启动，或用闸来停止。
The test system was proved that it can perfectly simulate the brake process of car by the test data comparison between actual car and braking bench and reached the goals of design.
通过实车制动试验和实验台制动试验的数据对比，证明该实验系统能较好地模拟实车的制动过程，达到了设计的要求。
Ji 'nan Audi repair after a good test run, check whether the brake effect is reflected.
济南奥迪维修换好之后进行试车，检查制动效果是否体现出来。
In this paper, a method to determine and calculate terminal test load is pointed out for adjusting brake rope parachute gear for cage hoisting in auxiliary shaft.
文中提出了副井罐笼提升制动绳防坠器调整时终端试验荷重的确定理论与计算方法，并结合具体实例介绍了这一方法的应用。
Described are the structure, working principle and performance test of the automobile spring brake chamber, and analysis is made of experimental results.
介绍汽车储能弹簧制动气室的结构及工作原理、基本性能的试验，并对试验的结果加以分析。
Test the brake block lining is worn or not, if it's worn seriously, should exchange the lining.
检查制动块衬瓦是否磨损，如磨损量过大，应更换衬瓦。
Get the truck driver to "set" the emergency brake and test the emergency brake by attempting to move the vehicle a very short distance.
让卡车驾驶员把刹车“放”在紧急制动档，然后让卡车开一小段距离，再试一下紧急制动的性能。
The result of the bench test shows that the newly developed brake disc has fairly good braking performance.
台架试验结果表明，新研制的制动盘具有良好的制动性能。
This paper introduces the principle, method and result analysis of performance test of brake used in shock testing system, and presents the estimation method of brake rigidity and specimen stroke.
介绍了冲击试验中制动器性能试验的原理、方法及结果分析，给出了制动器刚度及试件滑动行程等参数的估计方法。
The platform system can test some parameter such as lag force, the Max brake, the sum of Max brake between two wheels, brake balance and brake harmony time between wheels.
该检测平台系统用于对两轮拖滞力、两轮最大制动力、两轮最大制动力之和、制动平衡和两轮制动协调时间等参数进行检测。
The platform system can test some parameter such as lag force, the Max brake, the sum of Max brake between two wheels, brake balance and brake harmony time between wheels.
该检测平台系统用于对两轮拖滞力、两轮最大制动力、两轮最大制动力之和、制动平衡和两轮制动协调时间等参数进行检测。
应用推荐