The combined use of ABS System & Load-Sensing Proportion Valve is an effective brake pressure regulation method which has high reliability.
综合考虑ABS系统与感载比例阀组合使用是行之有效的，且是可靠性高的制动压力调节方法。
Since the wheel speed sensor is a basic component of normal anti-lock brake system (ABS), the observer proposed could be easily realized in low cost within the anti-lock brake system.
由于转速传感器是汽车防滑刹车控制系统（ABS）的基本组成部分，因此该观测器可与ABS结合工作，低成本的实现轮胎故障监测。
Logic gate limiting value control which is an efficient control method in nonlinear system is widely applied in automobile anti blocking brake system (ABS).
汽车防抱制动系统(简称abs)广泛采用的是逻辑门限值控制，这对于非线性系统是一种有效的控制方法。
A comparison among different kinds of brake pressure regulation methods in air brake system is made, including traditionary Pressure-limited Valve, Proportion Valve and ABS system.
对气制动系统制动压力调节的各种方法进行研究与对比，包括传统的限压阀、比例阀以及汽车防抱死系统。
Using the sensors and actuators of four-channel, four-sensor anti-lock brake system (ABS) USES both brake and throttle intervention to control wheel spin.
采用标准四通道、四传感器的防抱死制动系统(abs)可通过制动和节气门控制来控制轮胎打滑。
It is necessary to consider the dynamic response procedure of braking pressure of the brake in developing an ABS (Anti-blocking brake System) at high speed braking.
在开发高速防滑制动abs系统时，需要考虑制动器制动压力的动态响应过程。
The combined-ABS version features triple-piston front brake calipers and the confident control of Honda's most advanced Antilock Brake System.
这一结合防抱死制动系统（ABS）的版本，以三活塞前制动卡钳和本田最先进的防抱死制动系统的超强操控为特色。
This paper describes how to integrate anti-lock brake system(ABS), acceleration slip regulation (ASR) and radar range system into vehicle braking system with fuzzy logic controller.
本文首次将防抱死制动控制系统（ABS）、驱动防滑转控制系统（ASR）和雷达测距控制系统有机地综合到汽车制动控制系统中，并进行了模糊逻辑控制处理。
If the on-board diagnostic system stores a diagnostic trouble code and the ABS lamp is inoperative, the CAB will enable the red brake warning lamp.
如果板上诊断系统把对应的错误代码存储起来并且安全气囊灯不亮，防锁煞车控制器就会点亮红色的煞车警报灯。
The ABS improves the brake system of current motorcycles and reduces the rate of traffic accident.
摩托车刹车防抱死系统使历来的摩托车制动系统得到了改善，减少交通事故的发生。
The whole ABS models are established for the simulation requirement, including tire-road model, vehicle dynamic model, brake disk model, hydraulic system model and the controller model.
针对ABS仿真计算的需要，对整个防抱系统进行了建模，包括轮胎模型、车辆模型、制动器模型、液压系统模型和控制器模型；
The pressure gradient of the anti-lock braking system (ABS) was experimentally studied using an ABS hydraulic test bench for various conditions including normal brake, on-off brake, and step brake.
利用防抱制动系统（ABS）液压实验台，进行了ABS压力梯度多种工况的实验测试，包括普通制动、长加长减制动和阶梯增压、减压制动等工况研究。
The combined-ABS version features triple- piston front brake calipers and the confident control of Honda's most advanced Antilock Brake System.
这一结合防抱死制动系统（ABS）的版本，以三活塞前制动卡钳和本田最先进的防抱死制动系统的超强操控为特色。
The rain and snow tires and the ground, and reduce the friction, so braking system seems to be especially important, ABS antilock brake systems and power distribution system many EBD is indispensable.
雨雪天气，轮胎与地面的摩擦力减小，因此制动系统显得格外重要，ABS防抱死系统和EBD电子制动力分配系统是必不可少的。
ABS is added to the braking system to prevent the situations of losing of handling stability and to shorten the brake distant.
汽车防抱制动系统(abs)就是为了防止汽车制动时车轮抱死而产生失去操纵性和方向稳定性以及制动距离加长而加装在制动系统中的。
As the Anti-lock Brake System(ABS) has been widely used, testing assembly correctness of Commercial Motors ABS has become more and more important.
随着汽车防抱死制动系统（ABS）的广泛应用，商用车ABS装配正确性的检测变得越来越重要。
Automobile Anti locking Brake System and Anti slip Regulation are called by a joint name Anti slip Brake System, which is a developing trend of ABS technique now.
汽车防抱死制动系统和驱动防滑系统统称为防滑制动系统，是目前abs技术的发展趋势。
Chongqing Juneng automobile Technology Co. Ltd is a modern Hi-Tech enterprise specializing in developing, producing and selling anti-lock brake system (ABS) for automobiles and motorcycles.
重庆聚能汽车技术有限责任公司是专业研制、生产、销售汽车防抱死制动装置(简称abs)系列产品的高新技术企业。
Chongqing Juneng automobile Technology Co. Ltd is a modern Hi-Tech enterprise specializing in developing, producing and selling anti-lock brake system (ABS) for automobiles and motorcycles.
重庆聚能汽车技术有限责任公司是专业研制、生产、销售汽车防抱死制动装置(简称abs)系列产品的高新技术企业。
应用推荐