The scaled boundary finite element method is employed to deal with this kind of problem.
比例边界有限元法被用来求解这一类问题。
The problem of wave action with three identical 2D boxes in a fixed mean position in a finite water depth is computed by the scaled boundary finite element method and compared with a BEM.
本文应用该方法求解波浪与有限水深中三个相同，但之间存在狭缝的二维固定方箱的作用问题，为波浪与多模块超大型浮体的相互作用提供一些规律。
The mixed method of boundary element and fractal finite element is adopted to solve the cracked structure-acoustic coupling problems.
应用分配形有限元和边界元相结合的方法于含裂纹的结构声相互作用问题。
After a cell is broken, the stress adjustments of the other cells in the system are obtained by finite element method using the broken cell as inner boundary.
当单元破裂后，将破裂单元作为内部边界，利用有限元方法计算由于这个单元破裂对系统其他单元造成的应力调整。
The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
Conclusion: Cable and gap elements are reasonable boundary conditions of the finite element model of mandible, which will improve the similarity of the model.
结论：采用柔索约束、间隙元作为下颌骨及髁突的边界条件，可提高模型的相似性，为下颌骨的受力分析奠定基础。
Compared with Finite Element Method and Finite Difference Method, Boundary Integral Equation Method is computationally more efficient.
与有限元法和有限差分法相比，该方法具有更高的计算效率。
The emphasis is placed upon the numerical methods, including finite difference method, finite element method, boundary element method and so on.
着重讨论了包括有限差分法、有限元法和边界元法等在内的数值方法。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
按测量结果，确定了一个合理的边界条件，用有限元法模拟计算了沿轴场分布。
At present, the common numerical methods are finite difference, finite element, boundary element, integration equation and transmission line method.
目前，解决这类问题的数值方法主要有有限差分法、有限元法、边界元法、积分方程法、传输线法等。
The main numerical modelling techniques for vibro-acoustic analysis are based on element based method, such as the finite element and boundary element method.
分析振动-声的数值方法主要是基于单元的方法，如有限元和边界元。
The finite element model and result are given. The influence on displacement of different finite element model "s lateral boundary and the cavities" radius are discussed.
给出了有限元模型和计算结果，讨论了有限元横向边界不同和孔径大小不同的情况下对位移的影响。
This paper analyses three-dimensional stress distributions of the stud anchor chain by the theory of finite element and boundary element.
本文应用三维边界元法和三维有限元法对有挡锚链进行了三维应力分析，并将其结果与电测实验数据作了比较，吻合得很好。
A time domain coupling procedure was developed for the finite element (FE) and scaled boundary finite-element (SBFE) methods to analyze dynamic unbounded soil-structure interaction problems.
该文提出了一种有限元(FE)比例边界有限元(SBFE)时域耦合方法以分析结构地基动力相互作用问题。
The finite element representation of triangular prism and the treatment of boundary conditions ave described.
文中叙述了三棱柱体的单元表达式和边界条件的处理：手法。
The comparison and analysis on the finite element method and the boundary element method of high-pressure pervious lining tunnel have been conducted.
主要进行了有限元法高压透水衬砌隧洞和边界元法高压透水衬砌隧洞的比较分析。
In this paper, a coupling model of Beam element finite element boundary element Infinite boundary element for the analysis of structure foundation system in frequency domain is established.
采用梁单元、有限元、边界元、无限边界元相结合的方法，建立了频域中结构-半无限地基系统的分析模型。
A local transmitting boundary is combined with a lumped-mass finite element technique to form a mechanical model simulating the near field steady wave motion.
本文将局部透射边界和集中质量有限元技术结合起来形成一个模拟稳态近场波动的力学模型。
Boundary element method and finite element method will realize to disperse solving domain in a probe function.
除了对于狭长形状的解域处，边界元法的求解精度一般高于有限元法。
In this paper, coupling methods of finite element method and boundary element method are expounded, and the coupling methods of linear elastic problems for underground engineering are tried.
本文阐述有限元与边界元耦合的基本方法，并对地下工程中线弹性问题的耦合法进行了尝试。
In this paper, a discrete local transmitting boundary is combined with a lumped-mass finite element technique for simulating steady wave motion in the viscoelastic layered medium.
本文将离散的局部透射边界与集中质量有限元方法相结合，用于模拟粘弹性成层介质中的稳态波动。
Using the powerful software ANSYS, the boundary condition and mechanical conditions of supporter was simulated, and a finite element analyzing mechanical model for supporter of rotary kiln was set up.
通过合理模拟回转窑托轮的边界条件和受力状况，并采用功能强大的ANSYS软件，建立了回转窑托轮的有限元分析力学模型。
This paper discusses a method of selecting the boundary tree in edge finite element method, proposes the matrix rank method and introduces its applications.
介绍了棱边有限元法中选取边界树的原理和方法，提出了矩阵求秩法计算边界树，并结合实例说明其有效性．。
Emphasis in the discussion is put on presentation of finite element method in frequency domain, in which transmitting boundary has been adopted.
文中重点讨论了具有工程实用价值的引入了透射边界的频域有限元解法。
ZL15 wheel loader was taken as an example to illustrate the methods for establishing finite element model and applying boundary conditions.
以ZL 15装载机为例给出了有限元模型的建立方法和边界条件的施加方法。
The fix of section boundary condition has great influence on the reliability of the result while the finite element method is used to solve the temperature field of turbine rotor.
在用有限元程序计算汽轮机转子温度场时，边界条件的确定对计算结果的可靠性具有重要影响。
As to forward, emphasis is on analyzing basic equations, boundary conditions and finite-element solutions for magnetotelluric field in two dimension of finite-element forward method.
在正演方面，着重分析了有限元正演方法的基本方程序，边界条件以及二维大地电磁场的有限元解法。
Objective: to discuss the rational boundary constraint design in finite element analysis of the whole edentulous maxillary and cranial skeleton.
目的：探讨上颌骨三维有限元分析中较合理的边界约束条件的设定。
The stress concentration analysis was done by the finite element method and boundary element method. The fatigue strength and the strength under the static load were calculated.
对螺纹槽管进行了疲劳强度计算，并采用边界元和有限元法对螺纹槽管的应力集中进行了数值分析及静载强度计算。
The stress concentration analysis was done by the finite element method and boundary element method. The fatigue strength and the strength under the static load were calculated.
对螺纹槽管进行了疲劳强度计算，并采用边界元和有限元法对螺纹槽管的应力集中进行了数值分析及静载强度计算。
应用推荐