Based on testing data, combining well test, recovery and other geologic data, by pressure diagnose, curve analog and boundary analysis, an accurate reservoir parameter can be gained.
以试井资料为基础，结合试油、试采及其它地质资料通过压力诊断、曲线拟合、边界分析等，得到准确的油藏参数。
Based on the analysis on cooling process of stator, basic assumption and boundary condition are presented.
通过对定子冷却的分析，提出了计算的基本假设和边界条件。
Through the analysis and contrast of the electric - field intensity on the anode boundary, the cathode shape designed is tested further and its accuracy is evaluated.
通过阳极边界电场强度的分析与对比，进一步验证所设计的阴极形状，评价阴极的设计精度。
However, this approach cannot be used for analysis of load characteristics because it proves impossible to specify periodic boundary conditions.
上面的方法不能用于负载特性分析，原因在于不能确定周期性的边界条件。
In the heat transfer analysis, combining temperature on tire side tested by drum test, a numerical inverse method is described for determining the heat convection boundary on tire side.
热传导分析中，依据实测的轮胎胎侧温度场，提出了一种基于实验的数值反演方法来确定胎侧的对流热边界条件。
This paper makes an analysis on the relation of the stress boundary with the critical tangential compressive stress as well as on its influence on critical internal wrinkling.
本文分析推导了应力分界圆与临界起皱压应力、危险断面径向拉应力之间的关系，以及对临界起皱的影响。
Analysis of boundary layer fluxes shows that the amount of latent heat flux leaded to differ the Khanun's horizontal and vertical structure.
边界层方案的差异也导致台风动力和热力结构在水平和垂直分布上都出现显著差异。
Boundary surface analysis method for workspace of double-octahedron variable geometry truss robotic manipulators(VGTRM) is proposed in this paper.
提出了二重八面体变几何桁架机器人工作空间的边界曲面分析方法。
By the analysis of the unsteady pumping test data near the hydrogeological boundary.
通过水文地质边界附近非隐定流抽水试验资料的分析。
The screwdown block is improved by mechanics analysis with boundary element method, and a simple device is designed for dynamic load of oil film bearing used in high-speed wire rolling mill.
通过采用边界元法对高线轧机压下垫块改造模型进行力学分析，开发设计一种适合测量高线轧机油膜轴承动态载荷特性的简易装置。
Rubber is a very unique material, proper analysis of rubber components require handling the problems of geometric nonlinearity, nonlinear boundary conditions, and material nonlinearity.
橡胶是一种特殊的材料，要实施橡胶制品的有限元分析，就要能综合处理几何非线性、材料非线性以及边界非线性问题。
The paper deals with boundary effect analysis and concrete stress calculation of manhole for steel penstocks in Qiapuqihai hydropower station.
论述了恰甫其海水电站压力钢管进人孔边界效应分析与具体应力计算。
Text added to the inner boundary of a market analysis shape may be hidden behind the center rectangle.
添加到市场分析形状内边界的文本可能会隐藏在中央矩形之后。
This paper gives some analysis about the errors, boundary conditions and computing convergence.
同时对计算的边界条件及收敛特性也进行了分析。
The problems of random boundary notches are often occurred in engineering failure analysis.
边界缺口群是工程失效分析时经常遇到的问题。
This paper describes the dynamic boundary element method and its application to the analysis of dynamic effects of soil-structure interaction.
本文研究了动力边界单元法及其在土一结构动力耦合效应分析中的应用。
The structure form, calculating model, loads and boundary condition, structure analysis and member section choice are introduced. Superiority of the used plan is demonstrated at last.
就结构选型、计算模型、荷载与边界条件的选取、结构分析与截面选择等方面进行了介绍，并对结构方案的优越性进行了论证。
This research subject is done for engineering application, mainly about boundary condition analysis of mode calculation and analysis of vortex-excited response for barrel-shaped mast.
本文为实际工程应用课题，重点在于研究桅杆振动固有频率的边界条件分析和在风激励下的涡激振动响应的计算研究。
In addition, many laws have been discovered after the analysis of different boundary conditions, height-span radios and sections of the Latticed Dome with Steel Plates.
此外，对不同边界条件，矢跨比以及不同截面的铺钢板肋环型网壳进行稳定分析，发现许多有规律的现象。
The basic assumptions, equations and boundary conditions for bottom hole assembly (BHA) analysis were discussed.
讨论了下部钻具组合分析的基本假设、基本方程和相应的边界条件。
By analysis the experiment results, the relationship between boundary force and inflation pressure are determined.
通过试验结果分析，确定了边界绳张力、充气压力等影响因素和形面精度的关系。
Combined the curve theory of differential geometry and the cable model applied distributed load, form analysis and tension analysis of boundary cable, ridge cable and valley cable were performed.
结合微分几何的曲线论和分布荷载作用下索的受力模型，研究了索膜结构中边索、脊索和谷索的受力分析和形状分析。
This paper presents a probabilistic boundary element method for analysis of structural responses to static loads, when the shape parameters of structures are considered as random variables.
讨论了当把结构的形状参数考虑为随机变量时，平面结构静响应统计特性分析的随机边界元法。
Their results show that the dynamic boundary element method is effective in the analysis of soil-structure interaction. boundary integral equation, potential function. Laplace transform.
结果表明动力边界单元法在土一结构动力耦合效应问题中的分析是一种有效的方法。
An iterative process has to be carried out in the boundary element analysis of the contact between elastic roller and rigid plane.
用边界元法分析弹性滚柱与刚性平面的接触问题，需要采用迭代算法。
Such a pattern of global tectonics and motion can be used as the surface boundary constraint for analysis of mantle movement and dynamics.
此全球构造格局和运动，可作为启发和约束地幔运动和动力学分析的表层边界条件。
Objective: to discuss the rational boundary constraint design in finite element analysis of the whole edentulous maxillary and cranial skeleton.
目的：探讨上颌骨三维有限元分析中较合理的边界约束条件的设定。
In this paper, a coupling model of Beam element finite element boundary element Infinite boundary element for the analysis of structure foundation system in frequency domain is established.
采用梁单元、有限元、边界元、无限边界元相结合的方法，建立了频域中结构-半无限地基系统的分析模型。
Boundary value analysis USES the same analysis of partitions as equivalence partitioning.
边界值分析与相等类划分使用同样的分析。
The present paper deals with the material parameter identification of orthotropic plate with a circular hole by the approach of integrating optimization and boundary element analysis.
结合优化技术和边界元分析，针对正交各向异性孔板进行了材料参数的识别。
应用推荐