Conclusion Skin graft and alveolar mucosa both formed fiber connective tissue attachment on the surface of implant, which seal the environment between the oral and bone-interface.
结论口腔环境下,皮肤和牙槽黏膜均有纤维结缔组织在种植体表面附着,形成“袖口”,起生物封闭作用。
If the conventional screw would be applied after the LHS, the screw – bone interface would be overloaded and the screw would be worthless.
若普通螺钉后使用,螺钉-骨界面载荷将过大、螺钉亦无效。
AIM: to investigate the effects of torque force load on the stress distribution in implant bone interface, so as to help the clinical selection of implant location.
目的:研究扭转力载荷对支抗种植体骨界面应力分布的影响,以指导临床正确选择支抗种植体的植入部位。
Objective to study the influence of different shape of lower jaw on stress distribution at bone interface in the mandibular molar region of implant restoration models.
目的模拟单个下颌磨牙缺失的种植修复,分析不同下颌骨形态对种植体骨界面应力分布的影响。
Objective: To investigate the influence of cantilever lengths on the load transfer and stress distribution patterns of the interface between the bone and dental implants.
目的:为了探讨悬臂梁的存在及其长度对种植牙周骨界面应力传递、分布规律的影响。
Results: the stress values of the ball attachment in the palate area, alveolar bone and implant bone interface were much higher than that of the bar attachment.
结果:发现杵臼附着式固位的种植赝复体在行使功能时其腭部、牙槽骨、种植体周围骨界面的应力值均远高于杆卡附着式固位的种植赝复体。
Histomorphometry was used to analyse and compare bone growth metabolism of bone interface with implant as well as evaluation of biocompatibility from quantitative and dynamic aspects.
分期植入动物股骨内,取不同期骨标本制备磨片,用骨计量学方法分析比较不同种植体界面骨的生长代谢情况,从定量、动态的角度对其生物相容性给予评价。
The thickness of cortical bone is inversely proportional to the displacement of interface bone.
皮质骨的厚度与界面骨的位移成反比。
Maximal shearing strength at the bone HA interface.
骨—HA界面的最大剪切强度。
Result:Stress concentration was markedly found on the neck and apex of bone-implant and bone-tooth interface;
结果:种植体与天然牙联冠修复时,种植体、天然牙骨界面颈部和根尖部出现应力集中;
The bonding strength between CFPEEK and bone is higher than that of control materials. The histological results displayed that the biological fixation can be got in the CFPEEK-bone interface.
骨的界面结合强度明显优于传统人工关节材料,组织学显示CFPEEK能与骨形成良好的生物学固定。
Objective: To study forming of implant bone interface in immediate implant using guided tissue regeneration (GTR) technique.
目的:研究诱导组织再生(gtr)技术应用于即刻种植的骨界面形成。
Methods: the finite element method was used to analyze the change of the stress on implant and bone interface under different angles of the implants direction.
方法:应用有限元法分析不同倾斜角度对种植体骨界面应力峰值影响。
Result the custom made prosthesis effectively increased the fitness of prosthesis bone interface. It enhanced the stability of implants and improved the hip function as well as relieved pain.
结果定制假体安置方便,与骨腔匹配好,增强了假体稳定性,缓解了疼痛,改善了髋关节功能。
Objective: To explore the influence of the number of transimandibular implants and base-plate of titanium on the stress distribution patterns at the bone interface around the transmandibular implants.
目的:探讨穿下颌种植体数目,钛金基板对穿通下颌骨种植体周围骨界面应力分布的影响。
Objective To explore the shape and structure of calcified cartilage zone and its interface between the non-calcified articular cartilage and subchondral bone plate.
目的探索关节软骨钙化层的结构形态及其与软骨非钙化层和软骨下骨之间的界面连接方式。
In the view of the concrete's minute construction, cement and mortar encircled bone, there is tiny crack on interface of bone and mortar under temperature load.
从混凝土组成的细观角度出发,研究水泥砂浆包围的骨料,在温度荷载作用下首先在骨料与砂浆的界面上产生界面微裂缝。
This review summarized effects of different implant surface microstructure on osteoblasts at bone-implant interface, in order to guide optimization of implant surface microstructure.
本文综述了种植体表面微结构对种植体-骨组织界面成骨细胞的生物学行为的影响,为研究和设计种植体表面微结构提供参考。
Objective. Define the T1 and T2 anatomic lamina size and evaluate the bone-screw interface strength of various pedicle screw options and intralamina techniques.
确认胸1、2椎板的解剖尺寸,评估椎弓根螺钉和椎板固定螺钉的骨螺钉界面的生物强度。
Objective: to investigate the effect of different cortical bone thickness on stress distribution of implant-bone interface, thus to provide reference in clinics.
目的:研究不同厚度的骨皮质支持下,支抗种植体-骨界面应力分布的影响,为临床提供参考。
Objective: to study the effects of different designs in single mandibular molar implant restoration on the stress distribution of implant-bone interface.
目的:分析单个下颌磨牙缺失时不同设计的种植修复的种植体-骨界面的应力分布情况。
There is no obvious change on the stress distribution of the implant-bone interface as the change of the implant shape.
种植体周骨界面上的应力分布不随形态的改变而发生明显的改变。
The hydroxyapatite-coated prosthesis helped to reduce stress difference at bone and prosthesis interface.
羟磷灰石表面涂层假体能缓和界面层的应力差异。
Strong tetracycline labeling around the interface of BMP-HA group was observed, which indicated active formation of new bone.
HA组的界面有较强的四环素荧光标记,显示界面成骨活跃。
Aim To explore the ways of accelerating the tendon-to-bone interface healing through analyzing the factors that affect the healing of tendon-to-bone interface.
目的通过对影响腱-骨交界组织愈合因素的分析,探讨促进二者交界组织愈合的策略。
Objective: To explore the methods on metal-bone interface integration with Leitz-1600 saw microtome and bone grinding slice technique.
目的:探讨利用Leitz-1600型锯割切片机及骨磨片技术进行种植体骨结合状况的组织学研究方法。
Objective: To explore the methods on metal-bone interface integration with Leitz-1600 saw microtome and bone grinding slice technique.
目的:探讨利用Leitz-1600型锯割切片机及骨磨片技术进行种植体骨结合状况的组织学研究方法。
应用推荐