The heat-resistance and bond strength between PU and metal are improved by the primer.
此底胶具有耐热性能并改善了聚氨酯弹性体与金属之间的粘接性。
The results show that the methods maintain the original properties and increase coating-substrates bond strength.
结果表明，该方法既可保持涂层原有性能，又可增加涂层-基体间结合强度。
The interfacial diffusion of alloying element is an important factor to microstructure, apparent hardness and interfacial bond strength.
元素在界面两侧的扩散是影响材料显微组织、表观硬度及界面结合强度的关键。
The bonding of orthodontic brackets is very important in the procedure of orthodontics, and the bond strength is affected by lots of factors.
托槽的黏接是正畸治疗程序中非常关键的一环，而托槽的黏接强度又受到多种因素的影响。
Mg alloy; electroless plating; bond strength.
镁合金；化学镀；结合强度。
The bond strength between corroded deformed bars and concrete is studied.
对锈蚀变形钢筋与混凝土之间的粘结力进行了研究。
The bond strength adhesive tape for repeatability of test results is critical.
胶带的粘合强度对于测试结果的可重复性非常关键。
The shear bond strength decreased while the concentration of NaF was higher than 3%.
当氟化钠浓度高于3%后，托槽的抗剪粘接强度下降。
The bond strength between bone and titanium coatings was also measured by push-out test.
涂层与骨组织之间的结合强度用推出实验进行测量。
The bond strength of polymer(PAE) cement mortar with double booked steel fiber is the highest.
聚合物水泥砂浆与双肢钢纤维的粘结强度最大。
With same material and technics, bond strength of parallel lay-up is higher than upright lay-up.
材料和工艺相同时，顺纹组坯时的胶合强度高于垂直纹理组坯时的胶合强度。
Objective To compare the shear bond strength of light cured and chemically cured resin adhesive.
目的对光固化和化学固化树脂粘接剂的剪切强度进行对比研究。
Results show the pretreatment of basal body of magnesium alloy is important to the bond strength.
结果表明，镁合金基体的镀前处理对镀层的结合强度至关重要。
The resin fast permeability, infiltration of good products can improve bond strength between layers.
该树脂渗透性快，浸润性好，可提高制品层间粘结力。
The bond strength between AFRP belts and concrete was higher than that between steel bars and concrete.
而纤维带与混凝土之间的粘结性能要强于普通钢筋。
Insulating ability and peel bond strength are two important properties for thermal insulating covering.
保温性能和剥离强力是保温被两个非常重要的性能指标。
The bond strength of thermal sprayed coating is an important part for evaluating the quality of coating.
热喷涂层与基体的结合强度是衡量涂层质量的重要指标。
In addition, the ultimate bond strength decreases with the increase of anchorage length and bar diameter.
此外，极限粘结强度也随着锚固长度、钢筋直径的增大而减小。
Both of these applications require adequate bond strength of composite resin to the surface of porcelain.
通常各类全瓷修复体应用粘结性树脂粘固于牙体表面。
The bond strength of an iron-base coating material was measured and the validity of the method was proved.
以此测量了铁基涂层的结合强度，证明了方法的有效性。
Conclusion Self-curing hydrogel lining material has a very high bond strength, but partly affected by water.
结论自凝水凝胶软衬材料具有很高的粘结强度，但水对其有一定影响。
Moreover, it has other merits, such as high bond strength, innocuity, insipidity and no atmosphere pollution.
同时它还具有粘结强度高、无毒、无味、无大气污染等优点。
Adhesive for leather and footwear materials. bond strength. minimum requirements and adhesive classification.
皮革和制鞋材料用胶粘剂。粘结强度。最低要求和胶粘剂分类。
The results show that the adhesive has the characteristics of higher bond strength and better Storage Stability.
结果表明，该胶粘剂具有较高的粘结强度和优良的贮存性能。
In this paper, an improvement example of die shear strength and bond strength of a microwave module is introduced.
本文介绍了某微波组件芯片剪切力和键合强度的改进案例。
The bond strength between the coating and substrate can be enhanced through producing functionally graded coating.
通过制备梯度涂层可以提高涂层与基体之间的结合强度。
Bending strength, compressive strength, interfacial bond strength and frost-resistance are also studied and analyzed.
并对修补混凝土的抗折、抗压、新老界面粘结强度以及抗冻性等进行了试验研究。
Bending strength, compressive strength, interfacial bond strength and frost-resistance were also studied and analyzed.
并对其抗压、抗折、新老界面粘结强度及抗冻性等进行了实验研究。
Secondly, Neural Network model was built up to predict ultimate bond strength between the rebar and corroded concrete.
其次，建立了受腐蚀钢筋混凝土极限粘结力的神经网络预测模型。
Secondly, Neural Network (NN) model was built up to predict ultimate bond strength between the rebar and corroded concrete.
其次，建立了受腐蚀钢筋混凝土极限粘结力的神经网络预测模型。
应用推荐