From the structure analysis view, detection command relationship including detection primary command body, object and content three essential factors.
从结构分析视角而言，侦查指挥关系包括侦查指挥主体、客体和内容三项要素。
The skill with the anatomy is through the analysis normal body tissue, obtains to the human body modeling structure, the expression and the law of motion scientific knowledge.
艺用人体解剖学是通过剖析正常的人体组织，从中获得对人体造型结构，表情及运动规律的科学知识。
Based on the analysis of cutting chatter, the cutter body structure and parameters of special cutter for machining gear pump bodies are optimum designed.
在分析加工颤振机理的基础上，对加工齿轮泵壳体齿圈槽专用刀具的刀体结构和刀具参数进行了优化设计。
Through analysis on its rationality for the sizes of static bare body, a way to make structure design by using knitted garment block is introduced.
对照人体静态净体尺寸作了合理性分析，提出了运用针织服装原型进行结构设计的方法。
Key technologies of electric vehicle include power system, vehicle body structure design and analysis, overall vehicle control and energy management system etc.
电动客车的关键技术包括动力系统、整车车身结构设计与分析、整车控制和能量管理系统等。
This paper made some research on the modeling of some city bus body, FEM static intensity analysis and structure optimization.
本文对某型大客车进行有限元静态分析，探讨客车车身建模、强度分析与结构优化。
This machine adopts steel plate welding structure, the fuselage using the finite element analysis and design, Vibratory stress Relief of internal stress, so that body stable and reliable.
液压剪板机采用钢板焊接结构，机身采用有限元分析设计、振动时效消除内应力，使机身稳定、可靠。
This paper conducts finite element analysis on the body structure of a city passenger car with low entrance recently developed by certain company.
文章对某公司最新开发的低入口城市客车车身结构进行了有限元分析。
The stiffness and modal analysis of the new type body structure which is designed according to the light weight demand is performed.
分析了符合轻量化设计要求的新型的半承载式车身结构的刚度与模态。
Taking the advantage of CAE powerful functions of ANSYS software, a finite element analysis of butterfly valve is realized, and the dimension and structure of valve body is optimized.
利用ANSYS软件强大的CAE功能进行碟阀的有限元分析，从而可以对碟阀的尺寸和结构进行优化。
The analysis of the stiffness and modal characteristics of car body is the guidance for optimization of car structure.
对轿车车身进行刚度、模态特性的分析，可以指导人们对车身结构进行优化。
By the results of modal analysis of the body in-white, the body's natural dynamic features are got in the paper, and located some weakness of the structure.
通过对白车身的模态分析，获得了车身结构固有的振动特性，并找出了车身结构在动态激励时的薄弱环节。
In this thesis, based on the dynamics of flexible multi-body systems, the analysis of dynamical systems of cable-strut and beam steel structure and the corresponding simulation research is addressed.
本文基于柔性多体系统动力学对索杆梁钢结构施工动力学的理论进行了研究并研制了相应的仿真软件系统。
The main influence factors of the FEM are pointed out, and some structural analysis methods are proposed . It provides a reference base for using ANSYS to analyse the body' s structure.
并明确了车体有限元分析的主要影响因素以及对车体结构分析的基本步骤，为利用ANSYS对机车车体结构分析提供了参考依据。
The computation analysis shows that the car body structure design is reasonable and meets the locomotive general (arrangement) and relevant national standards for (locomotive) static strength.
最后通过计算分析，校验说明该车体结构设计合理，满足了机车总体布置和国家相关标准对机车静强度的要求。
In this paper, die structure and design parameters, techno - economic analysis of liquid extrusion for the aluminium alloy oil pump body were introduced.
本文介绍了铝合金油泵壳体液态挤压的模具结构及设计参数、技术经济分析。
The work has reference value for impact security simulation research, body structure design, safety performance analysis and traffic accident treatment.
本文的工作对轿车的碰撞安全仿真研究具有借鉴意义，对车身结构设计、安全性能分析和交通事故处理具有参考价值。
The car-body structure is analyzed, checked and revised with the ANSYS analysis software.
用ANSYS分析软件对车体结构进行了分析、校验和修改；
In this system the structure plan design, the load computation, the stress analysis, matches the muscle calculation, the construction drawing plan integration as a body.
在该系统中把结构方案设计、荷载计算、受力分析、配筋计算、施工图绘制集成为一体。
The contrastive analysis of modal test and simulation computation show that the finite element model of body-in-white has well represented the vibration characteristics of the original structure.
模态试验和仿真计算的对比分析结果表明，所建立的白车身有限元模型较好地反映了原结构的振动特性。
The application of Finite Element Analysis FEA to the design of the structure of wind tunnel balance obtains the rule of stress distribution on the wind tunnel balance by computing the whole body.
把有限元法应用到风洞天平结构设计，对其整体结构进行了计算，得出了风洞天平各种载荷作用下的应力场。
The numerical modeling and analysis of static and dynamic strength and characteristics of the low floor city bus body structure are carried out in the paper, using a standard CAE software.
利用标准的CAE软件平台，对低地板城市客车车身结构进行数值建模和静动态特性分析。
Analysis shows that the soil body is a kind of structural body, the change of a kind of structure parameter will cause the corresponding change of other several kinds of parameters within the system.
分析表明：土体是一种结构性体，系统内部一种结构参量的变化会导致另外几种参量的相应变化。
On the basis of the method, the FEA (finite element analysis) model of the van body in extendable work condition is established and the structure strength analysis of the van body is proceeded.
在此方法基础上建立了扩展厢式车厢体展开状态下有限元模型，并对其进行了强度分析。
It can be seen from the analysis that the mixed structure car-body is feasible no matter from the technical points or from the economical points.
通过分析可知，无论从技术角度还是从经济角度看，混合结构车体都是可行的。
By car body structure stiffness analysis, can guide the car design engineers to optimize the structure of the body.
对轿车车身结构进行刚度特性的分析，汽车设计工程师们以分析的结果作为车身结构优化设计的依据。
The deduced calculation formula of active soil pressure acting on each plate of cargo body will provide scientific reference for structure design and performance analysis of dump truck.
导出的车箱各板的主动土压力计算公式，为自卸汽车车箱结构设计与性能分析提供了参考。
The forming technology oft he upper body center plate in hot die forging and the characteristic of the die structure have been introduced with the analysis on the forming process.
从分析上心盘的成形过程出发，介绍了上心盘热模压成形工艺及模具特点。
The forming technology oft he upper body center plate in hot die forging and the characteristic of the die structure have been introduced with the analysis on the forming process.
从分析上心盘的成形过程出发，介绍了上心盘热模压成形工艺及模具特点。
应用推荐