The Blade in slot 13 had one aix LPAR (bxaix85) configured and active.
在插槽13中的Blade上配置了一个aixLPAR (bxaix85)而且正在运行。
The second part presents the application of skewed blade in the design of diagonal rotor.
第二部分是将叶片的弯曲设计应用于本文所用的斜流叶轮中。
The spiral pipe conveyor is welded with a continuous spiral blade in the cylindrical shell.
螺旋管输送机是在圆筒形机壳内焊有连续的螺旋叶片，机壳与螺旋叶片一起转动。
The numerical method of determining the water droplet impingement property of rotor blade in hover was studied.
介绍了直升机在悬停状态下，求解旋翼水滴撞击特性的数值方法。
The common creping blade is applicable to cleaning the blade in wrinkled position, e. g., Yankee creping blade.
适用于清洁起皱部位的刮刀，如杨基起皱刮刀。
There are many demerits in the traditional method to optimize the forging stock shape of blade in factory, but these de…
常规用来选择叶片锻坯合理结构形式的方法有诸多缺点，采用有限元方法将会在很大程度上弥补这些不足。
For the process of composite materials for the blade in wind turbine production, the mould of blade plays an important role.
在大型风力机复合材料叶片的生产过程中，模具起着至关重要的作用。
Printing tempo control by transducer, free adjustment by scraper and covering ink blade in accordance with the printing demands.
印刷电机使用变频器控制印刷速度，刮刀及覆墨刀可任意调节快慢，配合印件要求。
A feature information model is proposed to combine the design information and the geometric information of Turbine Blade in a same model.
本文提出了涡轮叶片特征信息模型，将涡轮叶片的设计信息和几何信息有机的统一在了一起。
I personally feel that, there are less than 5% (or even 1%) of authentic sword with complete fittings and blade in the current domestic market.
我个人人为，在目前国内市场上的古董刀剑真品中，完全装与刃完整的，到明的不足5%(甚至1%)。
The internal structure of turbo blade in plane engine is quite complex, which brings so much difficulty for parting design of turbo blade mould.
飞机发动机涡轮叶片的内部结构相当复杂，这给叶片模具的分模设计带来了很大的困难。
This article introduces the structures, types, applications, common problems and problem-solving methods of cleaning doctor blade in paper machine.
本文介绍了常见纸机清洁刮刀的结构、类型、应用形式、常见问题的种类及解决方法等，对生产有一定的指导意义。
The system keeps the linear velocity of the shear blade in pace with that of the rolled piece and warrants the accuracy of the specified cut length.
该系统能够逻辑控制剪刃的运行规律，保证剪刃线速度与轧件线速度同步，保证剪切产品长度的定尺精度。
The 6th stage blade in aero-engine compressor is taken as an example, the temperature effect on the blade vibration frequency blade is investigated.
以某型航空发动机压气机第六级叶片为例，研究了温度对叶片振动频率的影响。
Experimental results show that the trajectory of particles with large mass will be close to the pressure surface of blade in the centrifugal impeller.
试验结果表明：质量大的颗粒，在离心泵叶轮中，其轨迹总是趋向叶片压力面。
It is also recommended to glue a piece of leather from inside on the upper surface of the wooden frame as a washer to tighten the blade in the scabbard.
在刀鞘内表面的木头上贴上一块皮子用于紧固刀身也很不错。
The results show that the control system of runner blade in parallel with gate has a better dynamic stability than that of the runner blade in series with gate.
结果表明：在对象参数相同的条件下，轮叶、导叶并列结构所构成的调节系统较之轮叶、导叶串联结构所构成的调节系统具有更好的动态稳定性。
The spiral flow in the horizontal pipe can generate the spiral flow to transport sediment according to the way of equipping the guide blade in the middle of the pipe.
前两种排沙方式已经广泛应用于工程实践中，平轴螺旋管流排沙是近年提出的一种节能、高效的输沙方式，目前还处于试验研究阶段。
Drawer dividers may also be made from 1/4-inch sheet acrylic (have the retailer cut the pieces to size, or cut them yourself using a fine blade in a table or radial arm saw).
抽屉分隔器可能有四分之一英寸的塑料板（让零售商帮你消减尺寸，或自己用刀片切）。
In this paper unsteady numerical simulation of planar diffuse cascade is performed in the model profiles that choosing from mid-span of the blade in a repeated compressor.
本文选取某重复级压气机平均半径处的型线，进行平面扩压叶栅非定常数值模拟。
To produce engineering plastics wiper blade in stead of metal materials can improve the brushing effect of products except simple process technology and low cost of products.
通过用工程塑料代替金属雨刮片组件，不仅生产工艺简单、产品成本低，而且可以改善雨刮片的刮拭效果。
The rotor impedance is calculated from the rotor equations of motion in the fixed-coordinate system derived from the modal equations of blade in the rotating-coordinate system.
旋翼阻抗由旋翼在固定价值标系中的运动方程得到，这个运动方程由旋翼旋转坐标系中的桨叶模态方程导出。
The blade in the intermediate shaft adopts box plate type structure, to improve production efficiency; the blade adopts Q345 wear-resistant material, to extend the service life.
中间轴上叶片采用箱板式结构，提高生产效率，叶片材质采用Q 345耐磨，延长使用寿命。
The rotor impedance is calculated from the rotor equations of motion in the fixed- coordinate system derived from the modal equations of blade in the rotating-coordinate system.
旋翼阻抗由旋翼在固定坐标系中的运动方程得到，这个运动方程由旋翼旋转坐标系中的桨叶模态方程导出。
By means of stereomicroscopy and scanning electronic microscopy (SEM), the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.
采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。
By means of stereomicroscopy and scanning electronic microscopy (SEM), the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.
采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。
应用推荐