Ni/Fe and Cu/Fe bimetal were used to dechlorinate tetrachloroethene(PCE).
选用镍/铁和铜/铁双金属对四氯乙烯(PCE)进行脱氯试验 。
The bimetal element is the simplest and most often encountered sensor.
双金属元件是一种最简单和最常见的传感器。
Three typical AlSi bimetal driving membrane structures are analyzed in this paper.
对三种典型的铝硅双金属驱动膜片结构进行了有限元分析。
The CAD system for the drawing of the bimetal sheet was introduced and an example was also given.
本文介绍了自行研制的双金属板材拉延成形的CAD系统,并给出了设计实例。
The existing bimetal composite processes mainly are of cast-in casting, cast cladding and welding.
目前的双金属复合工艺主要是镶铸、包覆铸造以及焊接。
The liquid phase sintering process of steel based carbide - iron bimetal composite was researched.
研究了液相烧结钢结硬质合金-铁双层复合材料的生产工艺。
The cup and cone-shaped fractures often occur when a high strength bimetal composite wire is drawn.
在高强度双金属复合导线的拉拔过程中,往往产生杯锥状断口的断裂形貌。
When these metals are connected, bimetal couples are created and one metal corrodes with respect to the other.
当这些金属相连时,就形成了双金属电偶对,其中一种金属相对于另一种金属就被腐蚀了。
The change of glued strength of bimetal composite pipe under the action of heat load was analyzed in this article.
分析了在热载荷作用下双金属复合钢管结合强度的变化,研究了经历温度循环后内外层管之间出现松脱的可能性;
The mechanism of heat transfer is analyzed. The application situation of bimetal rolled fintube is recommended emphatically.
分析了翅片管的传热机理,重点介绍了双金属轧制翅片管的应用情况。
To enhance resolution of Ultrasonic Image System, an ultrasonic transducer used for testing bimetal clad layer was developed.
为了提高超声成像系统的分辨率,研制了用于检测双金属转子复合层扩散焊连接质量的超声换能器。
The capabilities of Fe0, Ni-Fe bimetal and Cu-Fe bimetal for reductive dechlorination of tetrachloroethylene(PCE)were studied.
研究了零价铁、镍-铁和铜-铁双金属对四氯乙烯(PCE)的还原性脱氯性能。
KSD301 snap action thermostat is small-size bimetal thermostat series with a metal cap, which belongs to thermal relays' family.
KSD301系列突跳式温控器是小型双金属片温控器,属温度继电器类器件。
The reason for the inferior fatigue strength of some home made bimetal bushes, improvement approach and sintering mechanism were discussed.
分析了某些国产同类及金属轴套抗疲劳性能低的原因,并对其改进途径及烧结机理进行了探讨。
The system is of reflective type and composed of thermostatic bimetal plate, lever piston framework, optical grating and optical fiber probes.
该系统具有反射式结构,由热双金属片、连杆-活塞机构、光栅及光纤探头组成。
A series of bimetal coordination complex fibers with different content of metal were prepared by controlling the concentration of metal ions and reaction time.
通过控制金属离子的浓度和反应时间制得一系列不同金属含量的双金属配合物纤维。
The aluminium base bearing alloy with rare earths is studied in this paper, which recommends making alloy, coating aluminium and rolling technology of bimetal.
本文介绍了稀土铝基轴承合金的研制,合金包铝及复合轧制工艺。
The paper introduces a new process that is continuous core-filling casting(CFC). The fabrication of bimetal composites of copper cladding aluminum is researched.
提出了一种制备包覆双金属复合材料的新工艺,即充芯连铸法制备包覆双金属复合材料的工艺。
In this text, the bonding mechanism of bimetal is attempted to inquire into and carry on theoretical analysis to bonding, and find out the reasonable rolling condition.
本文试图探讨双金属轧制连接的机理,对轧制连接进行理论分析,探寻轧制参数对轧制连接的影响规律,找出合理的轧制条件。
The relationships among properties, cold rolling process and stabilizing treatment had been investigated for the laterally welded bimetal strips of high expansion component alloy 304.
对彩管用横拼双金属材料中的高膨胀组元合金304钢带的性能与冷轧工艺、稳定化处理工艺之间的关系作了系统研究。
This paper introduces successful construction method and control measure currently used for holedrill, borehole deviation, protection tube, and embedment and installation of bimetal mark.
介绍了目前比较成功的倒垂孔钻孔、钻孔偏斜、保护管安装、双金属标的埋设及安装等施工方法和控制措施。
The research result indicates that, when bimetal material is certain, the size of heat treatment mandrill and the temperature of re-crystallized anneal would decide the end size of bimetals wreaths.
研究结果表明,双金属材料确定后,热处理芯轴尺寸和再结晶退火温度决定双金属环的最终尺寸。
Bimetal casting technology is the effective way to enhance the service performance of crusher hammers.
双金属复合铸造是提高破碎机锤头整体性能的有效手段。
Bimetal copper-cladding aluminum bars with different transition layers were manufactured by continuous casting.
在双金属连铸铜包铝复合棒坯试验中,出现不同过渡层的制品。
The centrifugal casting processing and wear resistance of of carbon-steel/high-Cr-cast-iron Bimetal composite were studied.
研究了碳钢/高铬铸铁双金属复合材料的离心铸造制备工艺及其耐磨性。
Bimetal composite hammers, with its safe, reliable, wear resistant features, have been the first choice for the big hammer crushers.
使用双金属复合材料锤头,安全可靠,耐磨增效,是大型破碎机锤头的首选备件。
Electric Contact Bimetal thermometer is a site for low-temperature measurement instrumentation, can be used to directly measure the liquid, the gas temperature.
电接点双金属温度计是一种适合测量中低温的现场检测仪表,可用来直接测量液体、气体的温度。
Electric Contact Bimetal thermometer is a site for low-temperature measurement instrumentation, can be used to directly measure the liquid, the gas temperature.
电接点双金属温度计是一种适合测量中低温的现场检测仪表,可用来直接测量液体、气体的温度。
应用推荐