In addition, there is positive correlation between fractal dimension and bending strength, bending elastic modulus.
另外，发现分形维数与抗弯弹性模量、抗弯强度之间存在正相关趋势。
This paper analyzes the error of torque sensor of strain-resistor which derives from the influences of bending moment on elastic axis, and discusses the Eliminating techniques.
本文对在应用应变式扭矩传感器时由于在弹性轴上的弯矩而引起的误差进行了力学分析，并提出了消除的方法。
In the theory of elastic thin plates, the bending of rectangular cantilever plates has long remained one of the most difficult problems.
在弹性薄板理论中，悬臂矩形板的弯曲，长期以来是最困难的问题之一。
In the theory of elastic thin plates, the bending of a free rectangular plate on the elastic foundation is also a difficult problem.
在弹性地基上的自由矩形板的弯曲，在弹性薄板理论中也是个难题。
For scholars and engineers the bending of reinforced concrete plates, especially free boundary plates, on elastic foundation has long been a concerned problem.
弹性地基上钢筋混凝土板的弯曲，尤其是自由边板，一直是学者和工程师所十分关切的问题。
When a welded I-section plate girder is subjected to bending or shearing, buckling of web in elastic range will be restrained by flanges.
在纯弯或纯剪分别作用下的工字形焊接板梁，在弹性范围内腹板屈曲时，翼缘会对腹板起约束作用。
Basing on the elastic bending theory of beams in large deflection, the non-linear shearing behavior of cellular materials under large deformation is studied in the paper.
将梁的弹性大挠度弯曲理论应用于蜂窝壁板，研究了大变形条件下蜂窝材料的非线性剪切变形行为。
As a supplement to the elastic hinged mode to bending the loaded structural strength of the horizontal buried heated oil pipeline is further analysed in this paper.
作为对弹性抗弯铰模型的补充，本文进一步分析了埋地热输管道大曲率半径水平弯头受载结构强度。
Based on the extended homogeneous capacity precision integration method, a novel method was presented for solving plane bending problems of elastic arches with arbitrary profile.
基于齐次扩容精细积分法，提出了求解复杂载荷作用下任意外形弹性拱平面弯曲的一种新方法。
Bending tests on walls and columns along their weak axis showed that both have high elastic deformation capacity.
对墙体和柱的沿弱轴的弯曲试验结果表明，它们都具有强的弹性变形能力。
This paper probes into the influence of initial bending and initial eccentricity on bars' dynamic behavior by using the theory of elastic stability.
采用弹性稳定理论，初步探讨了初弯曲和初偏心对杆件动力性能的影响问题。
A general solution to differential equation for deflection function in bending problem of orthotropic rectangular thin plate on elastic foundation is established.
建立了弹性地基上的正交异性矩形薄板弯曲挠度函数微分方程的一般解。
A general solution of differential equation for deflection function in bending problem of orthotropic rectangular thin plate on elastic foundation is established in this paper.
建立了弹性地基上的正交异性矩形薄板弯曲问题挠度函数微分方程的一般解。
In this paper a general form of analytical solutions to the bending problems for orthotropic rectangular thin plates on elastic foundations is proposed, going on the promise of Winkler's assumption.
本文提出了在文克勒假设前提下，弹性地基上正交各向异性矩形薄板弯曲问题解析解的一般格式。
This paper is concerned with the theoretical investigation of the bending and frees vibrations problems of moderately thick shallow spherical shells on the Winkler elastic foundations.
本文是对文克勒弹性地基上中厚度扁球壳的弯曲与自由振动问题的理论性研究。
Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.
机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。
This paper gives a general solution of differential equation for solving bending problem of rectangular plates on elastic foundations.
本文建立了弹性地基上的矩形板弯曲微分方程的一般解。
So far, we have found that the static elastic modulus of wood can only be measured through the experiments of tension, compression and bending.
到目前为止，仅通过拉伸、压缩或弯曲试验测得了木材的静弹性模量。
It can be used to compute in one run the secondary bending moments due to both elastic and creep strains, produced by prestress force.
它可以一次算出预加力引起的弹性的和混凝土徐变的次弯矩。
Result When the whole thickness of the samples were determined, the fracture load, bending strength and elastic modulus were increasing according the increase of the metal thickness.
在总厚度不变时，破坏载荷，弯曲强度及弹性模量都随金属厚度增加而增加。
The bending stiffness of elastoplastic member is product of tangent elastic modulus of material and inertia moment of the section.
抗弯刚度的概念是材料切线模量和截面对中和轴的惯性矩的乘积。
Using the method proposed by this paper, deals with bending of the uniformly loaded elastic circular plates with internal symmetrical point supports.
本文应用文提出的方法，研究受内点对称支承，在均布载荷作用下的弹性圆板的弯曲。
Furthermore, at the elastic stage, relationship between the bending deformation and shear deformation of test model under the inter-concentrated load was showed.
并就弹性阶段，得到了试验梁跨中作用集中荷载时，弯曲挠度与剪切挠度之间的相对增长关系。
In this paper, a new method, the successive substitution method, is presented for bending of circular thin plate loaded by axial symmetrical force on elastic foundation.
提出了弹性地基上圆板承受轴对称载荷作用弯曲问题的一种新的解法-迭代法。
There exists the elastic deformation during the process of sheet bending, and it will influence the springback of sheet after unloading.
板料在弯曲过程中，由于存在弹性变形，卸载后，弹性变形必然影响到板料的回弹。
A unified theory is presented to analyze some conventional methods for estimating the bending rigidity of fabrics, which described the elastic deformation of fabrics under gravity.
对由自重产生挠曲的各种织物弯曲刚度测定方法给出统一的理论分析。
The elastic property of DNA is characterized by the elastic rod and filament approximately when its length is almost equal to the bending persistence length.
当其长度和刚性长度相近时，其弹性性质可以由弹性杆或弹性细丝来近似描述。
The work principle and technical advantages of two-axle roll bending with elastic medium(RSEM) are described.
介绍了两轴柔性滚弯的工作原理和技术优势。
Elementary Elastic bending theory requires that bending stress varies linearly with distance from the neutral axis, but plastic bending shows a more accurate and complex stress distribution.
基本弹性弯曲理论要求弯曲应力均随到中性轴的距离而线性变化，但塑性弯曲理论揭示了一个更加精确的和复杂的应力分布。
The mechanical elbow, hot-bending bend, cold-bending bend and elastic installation can be used to handle pipeline corners in design of gas pipeline.
在燃气管道设计中对管道转角的处理，可以采用机制弯管、热煨弯头、冷弯弯管、弹性敷设。
应用推荐