Compression knee bands discourage bending.
压缩膝盖的带子阻止我弯腿。
So, such biomechanical experiments as compression rigidity, tension rigidity, torsion rigidity, bending rigidity were carried out, and the steadiness of different fixation methods was observed.
对所有标本进行压缩刚度，拉伸刚度，扭矩刚度，弯曲刚度等生物力学实验，观察不同固定方法的稳定性。
The fatigue failure types of the beams were fracture failure, bending tensile failure and shear compression failure.
这批试件的疲劳破坏形式为：折断破坏、弯拉破坏和剪压破坏。
At last, the author analyzes and studies numerical simulation of stretch bending forming with lateral compression.
在论文的最后进行了有侧压拉弯成形模拟的分析与探讨。
Compression steel plate structure PC beam, is to place steel plate in bending area of bygone PC beam.
压缩钢板构造的PC梁，就是在以往的简支pc梁弯压区内配置钢板。
It is shown that, when the effect of warping on rotation Angle is neglected, tension (or compression) is only coupled with horizontal bending and vertical bending instead of constrained torsion.
所得到的刚度矩阵表明，只有当忽略翘曲变形对截面转角的影响时，轴向拉压才只与水平弯曲及竖向弯曲相耦合，而与约束扭转不再耦合。
The compression strength and the bending rigidity of the refractory materials made from nano-clay modified phenolic resin anchoring agent were both improved.
采用这种结合剂所制得的无定形捣打料和铝碳砖的耐压强度以及抗弯刚度均得到较大提高。
This algorithm is based on high-order range model, which firstly corrects range walk in the process of range compression and then corrects range bending in two dimensional frequency domain.
该算法基于高阶距离模型，首先在距离压缩时校正距离走动，然后在两维频域校正距离弯曲。
As structural component, square hollow steel sections have favorable properties for resisting compression, bending and torsion.
方管作为结构构件，在压、弯、扭方面具有优越的性能。
So far, we have found that the static elastic modulus of wood can only be measured through the experiments of tension, compression and bending.
到目前为止，仅通过拉伸、压缩或弯曲试验测得了木材的静弹性模量。
The elastoplastic bending instability of the tapered compression members under axial loads about the weak axis is mainly studied.
主要研究了楔形变截面压杆绕弱轴的弹塑性弯曲失稳。
Because compression and bending strength of multi-function concrete hollow block is strong, its masonry compression strength, shearing strength and eccentric of out of the plane is much higher.
多功能混凝土空心砌块的抗压、抗折强度较大，使得多功能混凝土空心砌块砌体抗压强度、抗剪强度和平面外偏心承载力较高。
The OBBA series single ended bending beam load cell is designed for tension or compression loading applications including hopper scale and conveyor weighing.
OBBA系列单端弯曲梁式称重传感器是专为拉伸或压缩装载应用而设计，包括漏斗称重或输送称重。
The reduced bending stiffness method is extended to laminates with different moduli in tension and compression, and a new approximate method-twice-approximate method is presented in this paper.
本文把缩减弯曲刚度法推广应用于具有不同拉压模数的层板，并且提出了一种求解具有不同拉压模数的层板问题的新的近似方法——二次近似法。
Material should be adequately strong when subjected to tension, compression, shear, bending or torsion as per the intended use.
按照材料各自用途不同，其必须具有足够的抗拉、抗压、抗剪、抗弯或是抗扭强度。
This paper studied the relationship among bending moment, curve, deflection and concrete compression height by design principle for reinforced concrete structure.
从钢筋混凝土结构设计原理出发，分析截面弯矩、曲率、挠度、受压区高度之间的相互关系；
This paper also analyses the bending stiffness of arch, points out that the thrust of the neglect of axial compression deformation, can lead to thrust calculation error 30%.
本文还分析了压弯刚度对拱推力的影响，指出忽略拱的轴向压缩变形的影响，可导致推力的计算误差达到30%。
Cement morter and concrete prepared with seawarer and those prepared with fresh water are comparable in bending strength and compression strength.
水泥胶砂和混凝土的抗压、抗折强度与淡水拌和的相当。
Objective To study the effect of the number of screws on the bending stiffness and dynamic compression plate (DCP) strain in a transverse fracture model in vitro.
目的研究体外模拟横断骨折模型中螺钉数量对动力加压钢板(DCP)应变和弯曲刚度的影响。
The 3 hollow double heads compression screw appear to offer distinct advantage over the 3 solid screw, trifin in the against pressure, against bending force, torsional strength and torsional rigidity.
三枚中空双头螺纹加压钉比三枚实心螺纹钉、三翼钉在抗压、抗弯、抗扭强度和刚度上占有一定的优势。
Test the stability of the models of the control group and the groups with and without bone graft in axial compression, lateral bending, flexion-extension and rotation.
测试模型对照组、植骨组和非植骨组在垂直压缩、侧弯、屈伸和旋转方向上的力学稳定性。
In high temperature zone, as the temperature rising wood bending strength was reduced, and compression strength perpendicular to grain had gained in strength.
在高温区域，随着温度的升高，抗弯强度被明显削弱，而横纹抗压强度则得到增强。
The interface between fiberglass and gypsum and the effect produced from it on the bending strength and compression strength of fiberglass reinforced gypsum products are analyzed as well.
对玻璃纤维的分散方式、玻璃纤维与石膏的界面情况及其对玻璃纤维增强石膏制品抗折强度和抗压强度的影响进行了分析讨论。
A bending test has a merit that detection of deformation is relatively easy and a demerit that a stress state is not simple as compared with a compression or tension test.
弯曲试验有着能比较容易地探测变形的优点，缺点是应力状态不象压缩或拉伸试验那样简单。
Drill string receives the complicated stress which is tension-compression stress, torsion stress, bending stress, etc.
在长期工作中，钻具承受拉伸、压缩、弯曲和扭转等复杂应力。
The failure types of the beams were broken failure, bending-tensile failure and shear-compression failure.
这批试件的破坏形式为：折断破坏、弯拉破坏和剪压破坏。
From the analysis of the experiment results, it is indicated that the axial load ratio on behaviors of CFST subjected to compression-bending loads is the most significant effect factor.
对试验结果进行的分析表明，轴压比对钢管混凝土弯压构件受力性能的影响最为显著。
Based on theoretical method and test results, the indexes of bearing capacity of concrete filled steel tube subjected to axial compression and pure bending are discussed.
在数值计算和试验研究成果的基础上，探讨了钢管混凝土轴压强度承载力和抗弯承载力指标取值问题。
The researching works show that the behavior of concrete filled steel tubular members subjected to compression and bending moment is conti…
研究结果表明，随着核心混凝土强度的变化，钢管混凝土压弯构件的力学性能变化是连续和统一的。
The researching works show that the behavior of concrete filled steel tubular members subjected to compression and bending moment is conti…
研究结果表明，随着核心混凝土强度的变化，钢管混凝土压弯构件的力学性能变化是连续和统一的。
应用推荐