Cyclic bending tests of a box girder with longitudinal stiffeners were also carried out.
进行了纵筋加强箱形薄壁梁模型的循环弯曲试验。
Thirdly, pretressing, concrete creep and bending rigidity of box girder are studied to discuss their impacts on the deformation of girder.
再次，讨论了预应力、混凝土徐变、箱梁抗弯刚度等对桥梁结构下挠的影响。
In the ENTR 'acte there was a current of chill air in Ellen's box, the door was opened, and Anatole walked in, bending and trying not to brush against any one.
幕间休息时，海伦的包厢里有一阵袭人的寒气，门打开了，阿纳托利弯下身子，尽力不挂着别人，走了进来。
The analysis of a four-point bending test of box girder specimens shows favourable agreement with experimental data.
对箱形桁材的四点弯曲试验的分析表明与试验数据吻合良好。
For box systems, the gravity loads are transferred to the ground using a simply supported "post and beam" type system where the walls act as axial-loaded, (or combined axial plus bending), members.
盒子体系中，重力荷载是通过简支的“梁、柱”体系传递到地面的，而墙作为传递轴向荷载构件(并传递轴向附加弯矩)。
F draft sill is an integrated casting component with thin wall and inner empty box, and irregular deformations like torsion and bending occur easily.
牵引梁为薄壁、内空箱体整体铸造构件，铸件容易出现搓扭和弯曲无规律性变形。
Thinking over the influence of box beams shear lag effect, making use of the governing different equations and related natural boundary conditions of bending vibration to box girder.
考虑箱形截面梁剪力滞后效应的影响，利用推导出的箱形截面梁的弯曲振动方程及其自然边界条件，并据此进一步推导出了多跨箱形截面梁的固有频率方程。
In this paper, the lateral vibration dynamic analysis model of continuous box girder viaduct is presented in which the bending, torsion and distortion of box girder can be considered.
本文提出了可以考虑箱形梁弯曲、扭转、畸变多种因素的梁-墩系统横向振动的动力分析模型。
Additional bending moments in the cantilever box girder with a large span width ratio are distributed locally under concentrated loads.
集中荷载作用下，具有较大跨宽比的悬臂箱梁的附加弯矩分布具有明显的局部性质。
The box transition storey of tall building has the characters of rational stress distribution and large stiffness of bending, shearing and torsion.
高层建筑箱形转换层具有应力分布合理和抗弯、抗剪、抗扭刚度大等结构特性。
The strength deck, bottom, and side shell of a ship act as a box girder in resisting bending and other loads imposed on the structure.
船舶的强力甲板、船底板和舷侧外板在承受作用在船体结构上的弯曲和其他载荷中起一根箱型梁（船体梁）的作用。
Through measuring deflection and strain of test girders under loading, performances of this type of box girder, including bending, torsion and distortion are analyzed.
通过测试模型梁在静力荷载作用下的挠度和应变，来分析这种箱梁结构的弯曲、扭转和畸变等力学特性。
The post-buckling and carrying capacity of thin-walled box-like structures under bending and twisting was predicted by the finite element analysis of stiffened composite panels.
通过复合材料加筋壁板后屈曲有限元分析，预测盒形薄壁结构在弯扭组合作用下的承载能力。
In this paper, theoretical analyses on the torsional behavior of CFS strengthened reinforced concrete (rc) box beams subjected to combined action of bending-shear-torsion are performed.
对碳纤维布(CFS)加固的弯剪扭复合受力的钢筋混凝土箱梁的抗扭性能进行理论分析。
But in the operation of the curved box-girder, bending and torsion deformation has also been quite pronounced.
但在运营中遇到的弯箱梁弯扭变形问题也比较突出。
The officer jumped to his feet, and growing first pale and then red and bending almost double, he followed his partner silently out of the box, leaving Nicholas alone with his lady.
官员跳楼双脚，然后越来越红，苍白第一弯将近一倍，随后他的同伙默默地走出盒子，留下他的夫人单独与尼古拉。
Experiments on the torsional behavior of carbon fiber sheet (CFS) strengthened reinforced concrete (rc) box beams subjected to combined action of bending-shear-torsion are performed.
对碳纤维布(CFS)加固的弯剪扭复合受力的钢筋混凝土箱梁的抗扭性能进行理论分析。
The results show that the bending behavior of the prestressed concrete box beam with pretensioned bent-up tendons is good, and this may be a reference for engineering application.
结果表明折线先张预应力混凝土箱梁的受力性能良好，为工程应用提供了依据。
Concrete is poured on the upper part inside the steel box in the span-center bending moment area to solve the problem of the insufficient pressing area of concrete on the top of the steel box girder;
跨中正弯矩区钢箱内上部浇筑混凝土，可解决钢箱梁顶部混凝土受压面积不足的问题；
Concrete is poured on the upper part inside the steel box in the span-center bending moment area to solve the problem of the insufficient pressing area of concrete on the top of the steel box girder;
跨中正弯矩区钢箱内上部浇筑混凝土，可解决钢箱梁顶部混凝土受压面积不足的问题；
应用推荐