The simulation test method and assessment technique of parking brake assemblies on the bench are discussed in this paper, the approach for improving the performance of parking brake is also proposed.
探讨了在台架上进行驻车制动器总成的模拟试验方法和评定技术，提出了改善驻车制动性能的途径。
The analysis results meet with the bench test result very well, which verified the possibility of the FEM analysis method, and provide a direction ibr the research to optimization of structure.
将分析结果与台架试验结果进行对比，验证了有限元分析方法的可行性，为今后的结构优化研究提供了方向。
It also inquires into the method of trouble diagnosis adaptable to motor vehicle transmission bearing on the basis of bench simulating teat and analysis of motor vehicle transmission box.
在对汽车变速器台架模拟试验分析的基础上，探讨了适合汽车变速器滚动轴承故障诊断的方法。
This paper attempts to use the parameter estimation method to backward calculate tooth-rock sample interaction mathematical model according to some bit bench test data.
本文尝试用参数估计的方法，依据一些钻头台架试验的数据，来反求牙齿-岩样互作用的数学模型。
The traditional method for the measurement of scooter engine performances with test bench is to measure the power of engine crankshaft.
传统的坐式摩托车发动机台架性能试验方法是测试发动机的曲轴功率。
The problems such as burying of bench marks and settlement observation points, observation method, determining of precision criteria etc.
本文探讨了沉降观测中的几个问题，阐述了从水准点、沉降观测点的埋设，观测方法、精度指标的确定等。
The testing and evaluating results of OLED sample panel proved that the testing bench and the evaluating method of OLED luminance uniformity based on CCD are convenient and available.
给出了OLED样板的测试评估结果，表明了这种基于CCD的测试平台与评估理论的方法是快捷而有效的。
The experimental bench for applying vacuum pressure difference method was used for in-line testing, of which the exactness is up to over 98%.
采用真空压差法的试验台用于在线检测，准确性达98%以上。
In order to resolve how to detect the mechanical part of vehicle ASR on bench, the bench detection method based on the working principle of ASR is proposed and the detection bench for ASR is designed.
针对汽车ASR机械部分台架检测无法实现问题，提出了一种新的台架检测方法，设计了检测试验台。
With the results obtained from the combustion test with single column briquette conducted with a orthogonal test method, layer combustion test was further conducted on a briquette test bench.
利用正交试验法进行的单颗粒圆柱状型煤燃烧试验所获得结果，进一步在型煤实验台上进行了层燃实验。
The sterilization method of separating plant endophyte includes the following steps: 1. washing the host sample with endophyte to be separated with bacteria-free water in a bacteria-free work bench;
本发明公开了一种用于分离植物内生菌的消毒方法，包括以下步骤：1）在无菌工作台内，将欲分离内生菌的宿主样品用无菌水清洗；
Moulding Board -typed bench machine pumps the concrete lining, which is a lining method tunnel construction unit commonly adopts it at present.
模板台车泵送混凝土村砌是目前公路隧道施工单位普遍采用的衬砌方法。
Test is done on an arced linear synchronous motor test-bench and result shows a fast dynamic response achieved by direct torque control method and the control algorithm is also verified.
在圆弧型同步直线电机试验台上进行试验，试验结果较好的体现了直接转矩控制追求电机快速动态响应的特性，验证了控制算法的正确性。
Based on geological model of deposits and by means of CAD method, the authors put forward the building method of layered opencast mining geological model, whose layers are composed of bench.
本文提出了在矿床地质模型的基础上，应用CAD技术。建立以台阶为单元的分层式矿床开采地质模型的方法。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
In the Qing Jiang diversion tunnel of water power engineering, the bench cut method is applied and construction simulation is analysed.
清江水布垭导流洞具有复杂的工程环境，考虑工程各种不利因素确定采用台阶法施工，并对隧洞施工进行了数值模拟。
Method for evaluating the performance of such bed rock bench marks is also proposed on the basis of in situ measurement at Jinxian and Xianggongzhuang Stations.
根据金县、相公庄台实测资料，提出了评价基岩标的效果的方法。
The paper introduced the successful application of high bench caving method of using deep hole roller rock bit into the practice of solving the complex goaf area, a stuff problem of this kind.
采用深孔牙轮钻机、利用高台阶崩落法成功地处理了复合采空区，解决了复合采空区处理难的问题，使技术人员在熟练浅采、深采空区处理的情况下，又探索出复合采空区的处理方法。
Finally, identification tests are performed with the proposed method on the APU bench and experimental results show its validity.
最后在APU试验台架上进行了辨识试验，试验结果表明 该方法的可行性。
The invention provides a time calibrating method for ammeter verification. In the method, a time server, a verification system server and a plurality of verification bench bodies are provided;
本发明提供一种用于电能表检定的时间校准方法，包括提供时间服务器、检定系统服务器和以及多个检定台体；
The invention provides a time calibrating method for ammeter verification. In the method, a time server, a verification system server and a plurality of verification bench bodies are provided;
本发明提供一种用于电能表检定的时间校准方法，包括提供时间服务器、检定系统服务器和以及多个检定台体；
应用推荐