The getFileUploadStatus() method is used to calculate the current file upload progress, which will be called by the client using DWR (to be discussed in the next section).
getFileUploadStatus()方法用来计算当前文件上载进度，可由客户机通过DWR 调用（在下一节讨论）。
The method above can also be used to calculate the pore structure index of non-fractured reservoir.
该方法也可以应用于非裂缝性储集层确定孔隙结构指数。
More than just twisting wire, this method of making a telescoping armature teaches how to calculate and be exact, as well as how to plan and execute your creative ideas from their inception.
不仅仅是捻线丝，这使一个伸缩电枢方法教你如何计算和准确，以及如何规划和执行从一开始你的创意。
The Operators drilling representative and the Toolpusher calculate the necessary kill control parameters and have the kill procedures initiated. The method to be used will also be decided.
甲方钻井代表和带班队长计算必要的压井控制参数，启动压井程序。还要决定压井要使用的方法。
This paper presents a method to calculate hitting power and hitting energy through detecting hitting velocity and acceleration of screw press, and proved it to be feasible in the process of testing.
本文提出通过检测螺旋压力机打击速度和打击加速度的方法来计算其打击能量和打击力，并在测试中证明该方法是可行的。
The data of development proved that this method can be used to calculate reserve with high accuracy.
经过开发井资料进一步证实，该方法计算的储量具有较高的精度。
This method is simple without complicated calculations. It makes the parameters to identify with die structure design which can be applied practically to calculate stamping processes.
这种方法简单易行，不需要复杂计算，与冲模结构设计参数一致，是非常实用的冲压工艺计算新方法。
The method in this paper, which can be used to calculate the interior sound field of arbitrary-shaped closed thin shell (equal or unequal thickness), suits a large scope.
本文所提出的这一方法适用面广，可以求出任意形状封闭薄壳(等厚度或不等厚度)的内部声场。
This paper, based on many threaten assessment documents, proposed a simple and a practically method to calculate the threaten be between every side in combating under various ability.
文中在总结各种威胁评估计算方法的基础上，提出了作战双方在不同性能条件下的一种简单实用的威胁评估算法。
This paper makes improvements on the methods of stress circle drawings. And this method can be used to calculate the strain and moment of inertia.
本文对应力圆图解法作了改进，使图解法更直观、更简便。并将改进后的图解法应用到应变、惯性矩计算中。
The mathematical model of the bending process, the track design of bending manipulator and the calculate method are also studied to made the bending wood can be machined by numerical control.
并对弯曲过程的数学模型、弯曲机械手的轨迹设计及实际进给量的计算方法等理论进行了研究，为弯曲木的加工实现数控化奠定了基础。
The results can be used to calculate dispersive properties of calcite and the method can be used to obtain fitting formulas for other material.
本结果可在计算方解石色散特性时使用，本方法可在拟合其它材料的色散方程时使用。
Power equipments are connected to earth to ensure the safely of equipments and engineers. Mirror image method can be a effective to calculate the earth resistance and step voltage.
将电力设备的某些部分接地，是为了设备与操作人员的安全，本文应用镜像法对此进行了一些具体的分析计算。
Using C-G expression engineering method to calculate the penetrating depth of fragment, which is proved to be effective.
提出利用C-G公式估算侵彻深度的实用计算方法，并且得到了很好的试验验证。
This method can be used for conventional heavy oil reservoir to calculate ultimate drainage radius and reasonable well spacing through starting pressure gradient.
将研究结果应用于普通稠油油藏，给出了利用启动压力梯度确定极限泄油半径及合理井距的理论计算方法。
By practical analysis, this method is proved to be easy to calculate and of high resolving power, and the results are objective and reasonable.
经实例分析表明，该方法具有计算简便、分辨率高等特点，所得优化结果比较客观合理。
But this does not mean that the adjoint method can not be used to calculate the gradient.
但这并不意味着在梯度计算中不能使用伴随方法。
The method presented in this paper which is used in airfield evaluation is practical and reliable, the program can be used to calculate stresses in irregular concrete pavement plate.
通过实际对比认为本文提出的机场道面评定方法实用、可靠，所提供的程序适合于非规则分仓的路面结构的计算。
Through analysis, an actual discharge process line method should be adopted to calculate calculating average discharge per diem.
经分析采用了实测流量过程线法推算日平均流量，推算成果满足《规范》规定的精度要求。
The method deduced in this paper can also be used to calculate the maximum tensile forces for lifting a weight nearby the water surface during the salvaging operation.
本文导出的计算方法也可用于计算打捞作业中提升重物至水面附近时吊索的最大张力。
The method of this paper can't be used to calculate electric-big size targets, because there will be much more units in the matrix, and all these are limited by the speed and memory of computer.
本文所采用的矩量法不适合分析电大尺寸的目标，因为在计算的过程中有更加庞大的矩阵计算，这些都被计算机速度和内存所限制了。
Line Successive Over Relaxation (LSOR) can be used as one method to calculate the equation.
差分后形成的大型七对角线性方程组，可采用逐次线松弛方法迭代求解。
This method can be applied to calculate rolling-moment derivatives of wing due to yaw and sideslip.
本方法可以用来计算机翼因偏航与侧滑振动而引起的滚转力矩气动导数。
So, using the digital deformation data to calculate the crustal deformation rate can be taken as a seismic method in the routine seismic prediction.
因此，应用形变数字化资料计算地壳形变速率，可作为对地震活动以及日常地震预测的一种分析方法。
The method is applied to calculate lateral stiffness matrix in space cooperating analysis and the the degree of freedom can be greatly decreased.
空间协同分析时，采用超元法（每个单元由多根杆组成）计算等效柱的侧移刚度矩阵，自由度成倍减少。
The finite element method is a dispersed method, so it can be used directly to calculate the status for different loads, rigidity, etc.
有限元法是一种离散化的方法，它可以直接用来计算荷载不同、刚度不同的各种情况。
Both conventional method and mutually related field-circuit algorithm can be used to calculate and analyze parameter and performance of synchronous electric machine.
进行同步电机参数及性能计算分析时，可以采用传统电磁计算方法，也可以应用场路结合算法。
Both panel method and lifting surface method can be used to calculate the unsteady force.
非定常力可以采用面元法或升力面方法计算得到。
Both panel method and lifting surface method can be used to calculate the unsteady force.
非定常力可以采用面元法或升力面方法计算得到。
应用推荐