The temperature control, the viscosity controal and the effect of catalyst in the preparation process of vegetable-oil-based resin have been studied in this paper.
对以葵花子油、棉子油为原料制备印刷油墨用植物油树脂的温度控制、粘度控制及催化剂影响进行了研究。
The rack may be formed of a variety of biodegradable, compostable materials, including for example molded polypropylene or organic resins such as a corn-based resin or potato-based resin.
该支架可由各种可生物降解、可堆肥材料形成，包括例如模制聚丙烯或有机树脂例如基于谷物的树脂或基于马铃薯的树脂。
Anshan Xingye Polymer Chemical co., Ltd. is specialised in the production of high-performance, environmental-friendly water-based resin and coating of industrial products, high-tech enterprises.
鞍山兴业高分子化工有限公司是专业生产高性能、环保友好型的水性工业用树脂和涂料产品的高新技术企业。
Based on analyzing the curing characteristics of the resin system and the isothermal viscosity curves, an engineering viscosity model was developed.
根据对树脂固化特性和等温粘度曲线的分析，建立了树脂体系的工程粘度模型。
Based on practice, characteristics of coating resin for spray-up process are discussed in this paper.
本文根据生产实践，讨论了喷涂用胶衣树脂所应具备的特性。
Based on the resin curing the hardness and thermal deformation temperature higher, but also has a good climate of tolerance and toughness.
其基础树脂固化后的硬度和热变形温度较高，同时又具有良好韧性和耐气候性。
Deep caries based by the glass ions cementation agent, could significantly reduce composite resin pulp stimulation to protect pulp, and better effect.
深龋经玻璃离子粘固剂垫底后，能明显减轻复合树脂对牙髓的刺激作用，从而护髓效果更佳。
The earlier resin technology was based on resins which contained acid groups. These could be neutralized to allow them to become soluble in water.
早期的树脂制造技术都是以含酸基团的树脂为基础，中和后，他们可以溶于水。
Abstract Fpoxy modified urushiol-furfural resin based on the modification of Chinese lacquer has been studied.
论述了以生漆改性为基础的环氧改性漆酚糠醛树脂的研制。
Thermoplastic polyester resin is polyethylene terephthalate (PBT) compounds based binder polymer semi-crystalline materials.
热塑性聚酯树脂是以聚对苯二甲酸丁二酯（PBT）聚化物为主基料的半结晶材料。
The synthesis and application of water based polyurethane filling resin are discussed .
对水性聚氨酯填充树脂的合成进行了初步探讨。
The title conductive coatings based on chlorinated polyether resin as binder and mixed with compound conductive graphite, solvents and additives shows its volume resistivity 0.
采用氯醚树脂为基料，复合导电石墨、溶剂和助剂所制备的导电涂料，体积电阻率可达0。
The title photosensitive phenolic epoxy acrylate resin has been prepared based on acrylic acid and F-44 epoxy resin as basic materials, which contains epoxy as well as acrylic groups.
本文以丙烯酸和F - 44环氧树脂为原料，合成了一种既含有环氧基又含有丙烯酸基的光敏酚醛环氧丙烯酸酯树脂。
A dilative transparent fireproof coatings were based on ethanol modified urea resin as binder, phosphoric acid and starch as fire retardant.
以乙醇改性的脲醛树脂为基料，磷酸和淀粉为防火剂制成膨胀型透明防火涂料。
The basic theories of selective laser sintering and its sintering technique are introduced, and the sintering process and parameters of the resin-based prototyping composites are discussed too.
介绍选择性激光烧结及烧结技术的基本原理，探讨了树脂基复合成型材料选择性激光烧结工艺及参数。
In this paper, development of reinforcing materials used for resin-based composites is reviewed, the structure and properties of reinforcing materials is analysed.
介绍树脂基复合材料用增强材料的新进展，分析了增强材料的结构与性能。
Recent research advances in fabrication methods, the properties and the function mechanism of the epoxy resin-based nanocomposites were introduced in this paper.
介绍了环氧树脂基纳米复合材料的制备方法、性能、作用机理及研究进展。
This paper discussed the manufacturing process of isobutanol etherified melamine and the performance of the paint film based on the title resin.
本文探讨了异丁醇醚化三聚氰胺树脂的工艺条件，并列举了异丁醇醚化三聚氰胺树脂漆膜性能。
Thixotropic resin based on ortho-phthalic acid.
触变型，邻苯型基体的不饱和聚酯树脂。
This paper illustrates the production and the demand of glass fibre and resin based composite material in some countries.
本文扼要介绍一些国家玻璃纤维及其树脂基复合材料的生产和需求情况。
A kind of frictional composites for vehicle brake is developed with better tribological properties based on phenolic resin with ceramic, organic and metallic fibers compound reinforcement.
利用陶瓷、有机、金属纤维混杂增强酚醛树脂，研制开发了一种汽车用新型树脂基制动复合材料。
Transparent fireproof coating for wood based on melamine-formaldehyde resin as raw materials has good decorating property and fireproof property as well.
以三聚氰胺-甲醛树脂为原料的木材透明防火涂料，具有良好的装饰性能和防火性能。
He product based on phenolic resin as adhesive with mineral filler and other additives is processed into thermosetting plastics.
本产品以酚醛树脂为粘合剂，加入矿物填料及其它添加物而制成的热固性塑料。
DPFC heat insulated pad is based on PPS resin with middle-empty glass micro - bead and glass fiber as reinforcement.
DPFC隔热垫块是以PPS树脂为基体，以中空玻璃微珠、玻璃纤维作增强材料制得的。
This paper focuses on the development and application of the composites based on phenolic resin , silicone resin and phosphate.
重点介绍了酚醛树脂、有机硅树脂、磷酸盐等系列耐烧蚀复合材料的研究进展及应用。
This paper focuses on the development and application of the composites based on phenolic resin , silicone resin and phosphate.
重点介绍了酚醛树脂、有机硅树脂、磷酸盐等系列耐烧蚀复合材料的研究进展及应用。
应用推荐