Based on the experiment of biofilm A/O process, the feasibility of brief-nitrification in attached microorganism system is studied.
基于菌膜厌氧好氧工艺法流程试验，对附着微生物简短硝化的可行性进行了研究。
However, that was disproved based on the experiment results.
不过，这是在反驳根据实验结果。
The reasonable extrusion technics and equipment are introduced, based on the experiment.
在实验研究的基础上，提出了合理的挤出工艺及设备条件。
The temperature deviation control based on the experiment rule in vertical shaft cement kiln is described.
基于经验规则的立窑偏火控制器的设计与实现。
Based on the experiment and the theoretical calculation the design of the lower deck structure is also discussed.
并在试验和理论计算的基础上，对下甲板结构的设计进行了讨论。
An energy calculation model is established for the gas engine driven heat pump based on the experiment of components.
在对燃气机热泵部件进行实验的基础上，建立了燃气机热泵系统能耗计算模型。
The suitable technological conditions of the reactions and unit operations were established based on the experiment results.
通过试验优选出各步反应和单元操作的适宜工艺条件。
Based on the experiment, the relation between ring parameter and vibration velocity of 30204 tapered rolling bearing is studied.
以试验为基础，研究30204圆锥滚子轴承套圈参数与振动速度的关系。
Based on the experiment, the mathematical model of close-loop temperature-controlling system and PID controller were constructed.
以实验为基础，建立了闭环温度控制系统的数学模型，构造了相应的PID控制器。
Based on the experiment system, a network face recognition system is implemented. It provides a product prototype for further use.
在综合测试系统的基础上实现网络化人脸识别系统，为商业应用提供网络人脸识别原型系统。
Based on the experiment results of single crystals, a discrete slip model is established to describe the crystal plastic deformation.
基于韧性单晶体实验现象，建立了描述晶体塑性变形的离散滑移模型。
Based on the experiment, the process and the effect factors to get the D-type graphite in the production are discussed in this paper.
本文在实验基础上探讨了生产中获取D型石墨的工艺及影响因素。
This paper analyzes the pressure distribution around the stationary cylindrical Model based on the experiment using the theory of flow.
本文应用绕流理论对圆柱形煤锭模型纵向绕流的受力在实验的基础上进行了分析。
Based on the experiment, the rheological model and the flow state of paste-like slurry under the condition of steady flow were studied.
在实验基础上研究了似膏体的流型以及在稳定流状态下似膏体的流态。
Factors affecting boundary layer are studied systemically, the mathematical expression of porous flow based on the experiment is derived.
系统研究了影响边界层的因素，并在实验的基础上，推导了考虑边界层影响下的渗流力学表达式。
Based on the experiment and research, this paper presents the advantages of using PTFE soft belt bearing shell to substitute babbitt metal.
在实验研究基础上，提出了用PTFE(聚四氟乙烯)软带轴瓦替代巴氏合金轴瓦的问题。
Based on the experiment we can include that the preparation of oil-cast nylon and the sintered temperature of composite is the pacing factor.
实验可知，油尼龙的制备与复合烧结温度是实验成败的决定因素。
The effects of different intake swirl ratio on the performances and exhaust emissions of diesel engine were investigated based on the experiment data.
试验结果表明，发动机在高、低速区的最佳进气涡流强度是不同的。
Relation between phytochrome action modes and possible multiple pathways for phototropic signal transduction was analyzed based on the experiment results.
根据上述研究发现探讨了植物光敏素作用模式与不同向光性反应信号转导途径之间可能存在的相互关系。
The temperature system is a class of difficult object, In this paper, an method of control based on the experiment rule for the Si Mo furnace is developed.
温度系统是一类较难控制的对象，例如文中所述硅钼炉的温度控制问题，作者采用经验规则控制方法解决了这类对象的有效控制问题。
Based on the experiment results, analyses reinforcement effect of textile, gives the reasons of the difference in theory calculation and experiment result.
并结合试验结果对织物增强效果作出理论分析，分析理论计算与试验结果产生差异的原因。
Based on the experiment achievement of shoot apex grafting in economic trees in the last 20 years, the key field for the future research has been pointed out.
根据经济林木试管茎尖嫁接近20年来的研究成果，提出了今后的重点研究领域。
Based on the experiment results on three kinds of open graded ATPB, it is concluded that asphalt content should be above 2.5% and porosity should be above 18%.
本文经对三种开级配的沥青稳定碎石进行了试验研究，得出ATPB的沥青用量应在2.5%以上，空隙率在18%以上的结论。
Based on the experiment, the relations between cutting forces and oblique angles of wood fibre during the transitional cut on plane of wood fibre were studied.
根据试验结果研究了在木材纤维平面中过渡切削时切削力和加工表面木材纤维倾斜角之间的关系。
Based on the experiment research and finite element analysis, the fretting wear mechanism and the influence factors on fatigue life are made clear in this paper.
在数值模拟结果与试验结果基础上，总结分析了微动疲劳损伤机理及寿命的影响因素及原因。
Based on the experiment of rheological characteristic, the rheological model and the flow state of paste like fill slurry with tailings as aggregate were studied.
在流变特性实验的基础上，对尾砂作骨料的似膏体充填料浆的流变模型和流态进行了研究。
Based on the experiment, a mathematical model between the quantity of air drawing and the diameter of auxiliary pipe for the tapered t branch has been established.
在试验的基础上建立了锥形三通抽气量与辅助管管径的数学模式，与孔板三通比较，锥形三通具有抽气效率高、动力消耗低等优点。
Atomization process of viscous fluid by using airblast three-channel nozzle and effects of different factors on this process was investigated based on the experiment.
研究了粘性流体在三通道气流式喷嘴的雾化过程，考察了三通道喷嘴雾化性能的影响因素。
Finally, the conclusion was reached based on the experiment study and theoretical analysis, and some Suggestions on study of CS Panel Structure in the future were presented.
最后，通过试验和理论分析进行了总结，给出了本文的主要结论，同时也对以后CS板式结构的研究提出了建议。
Finally, the conclusion was reached based on the experiment study and theoretical analysis, and some Suggestions on study of CS Panel Structure in the future were presented.
最后，通过试验和理论分析进行了总结，给出了本文的主要结论，同时也对以后CS板式结构的研究提出了建议。
应用推荐