Numerical calculations were based on finite element analysis and the coupling of...
实测温度值与有限元计算值变化趋势基本一致。
The methods of welding distortion prediction are largely based on finite element analysis.
焊接变形预测方法大都基于有限元分析。
Based on finite element analysis, the authors studied the regional stability of the Hutiaoxia (region) systematically.
通过二维有限元对滇西北虎跳峡地区区域构造稳定性进行了系统研究。
In order to understand the actual movement state, the process airflow in spunbond is studied by dint of computer software based on finite element analysis.
为了解气流的实际运动情况，借助基于有限元分析的计算机软件对纺粘法非织造布生产中的工艺性气流进行探讨。
The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.
分析结果显示，将基于有限元分析的优化技术应用于非标零件的设计是一种非常可行的方法。
Dynamic character of oil testing pipe shock absorber system under impact load were searched which were based on finite element analysis software ANSYS in this paper.
本文基于有限元分析软件ANSYS研究冲击载荷下石油测试管柱减振系统的动力学性质。
The effects of disuse on trabecular bone structure was simulated, using the bone (re) modeling model with goals of physiological regulation, based on finite element analysis.
本研究将有限元分析与带有调整目标的骨再造方程相结合，模拟废用对松质骨结构的影响。
Based on finite element analysis and the principle of mechanical equivalence, the supporting structures for the hydrogen and oxygen turbine pumps of a rocket engine were analyzed.
在对某火箭发动机氢、氧涡轮泵支撑结构进行有限元分析的同时，对该结构进行了力学理论探讨。
In this thesis based on engineering examples, some Suggestions were put forward to control crack by finite element analysis of floor slabs.
本文结合工程实例，对楼板的温度裂缝进行了有限元分析，并提出了一些预防裂缝的建议。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
Based on the results of experiment and finite element analysis, the shear strength and the effect of reinforcement of the perforated brick walls are also discussed.
本文还根据试验结果和有限元法分析，探讨了空心砖墙的抗剪强度和横向、纵向配筋效应。
Based on the geometrical nonlinear finite element (GNFE) theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.
本文根据几何非线性有限元理论，提出张力膜结构初始形态分析的8结点曲面四边形等参单元。
Based on the results of finite element analysis, it indicates that the analysis has a good precision and gains coincident conclusion with the test.
结果表明有限元分析具有较好的精度，与试验分析有一致的规律。
Based on completion of wall strength calculation, then do the finite element stress analysis.
在完成管壁强度计算的基础上，进行管壁有限元应力分析。
An automotive CAE software based on automotive theory, finite element analysis and optimization design has been developed to resolve relevant engineering problems.
基于汽车理论、有限元分析和优化设计方法，为解决工程实际问题，开发了汽车CAE软件系统。
Abstract: the method of fast finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
文摘：研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法，并实现了计算程序。
Based on plastic analysis and non-linear finite element analysis, the structure's load-bearing capacity under secondary internal forces is calculated and certified.
利用塑性极限分析和非线性有限元分析方法计算并验证了结构在考虑次内力作用时的极限荷载。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
Based on finite element method, break analysis and the measured data, the paper analyzes the breakage reasons of universal joint.
根据有限元计算、断口分析和实测数据对万向接轴断裂的原因进行分析。
Authors suggest a practical method based on dynamic analysis of finite element for modifying natural frequencies of hull grillage beam, and its software is completed.
提出一种基于有限元结构动力分析的船体板架固有频率实用修改方法，并进行了软件设计。
Optimization results show that this structure optimization method based on nonlinear finite element analysis is effective in joint structure design and the engineering demands are well satisfied.
优化结果显示，采用非线性有限元法和优化方法对卡环连接结构进行设计能够取得满意的效果，设计结果满足工程要求。
Based on interval analysis and displacement finite element method, the static displacement response analysis of structure comes down to solve the interval finite element control equation.
现有的理论和方法采用区间分析和位移法有限元理论对其进行分析，最终归为位移法区间有限元控制方程的求解。
Based on the monitoring for expressway tunnel construction and finite element analysis, the paper analyzed the country rock stress state in the process of tunnel construction.
通过高速公路隧道施工监测及有限元数值分析方法，分析隧道施工过程中围岩应力变化情况。
Based on the finite element analysis results of the dynamic properties of the structure, the acoustic radiation of the structure is analysed using the results of the surface velocity distribution.
在用有限元法分析结构动态响应特性的基础上，利用有限元分析得到结构表面振动速度分布，分析表面阻尼处理板结构的声辐射。
Moreover, based on the method of finite element analysis and the general software, the failure behavior of high density syntactic foams is investigated.
还利用计算机和通用软件对高密度复合泡沫塑料进行了有限元分析，研究了高密度复合泡沫塑料的失效行为。
Based on the finite element analysis, the plastic response chart of typical pressure bearing structures were built.
在有限元分析的基础上，建立典型承压结构塑性载荷响应图谱。
Based on the experiment research and finite element analysis, the fretting wear mechanism and the influence factors on fatigue life are made clear in this paper.
在数值模拟结果与试验结果基础上，总结分析了微动疲劳损伤机理及寿命的影响因素及原因。
Research was conducted into the optimization design of stay ring structure of the bulb tubular turbine based on the analysis of finite element.
邢伟在有限元分析的基础上，对贯流式水轮机座环结构进行了优化设计研究。
Research was conducted into the optimization design of stay ring structure of the bulb tubular turbine based on the analysis of finite element.
邢伟在有限元分析的基础上，对贯流式水轮机座环结构进行了优化设计研究。
应用推荐