A new design method of MP3 player based on ARM processor is presented.
提出了一种基于ARM处理器的MP3播放器的设计方法。
An electromagnetic flowmeter converter prototype based on ARM has been developed.
研制了基于ARM的电磁流量转换器样机系统。
This thesis is to study and realize the development of GPS positioning based on ARM.
本文就对基于ARM的GPS定位系统的开发进行了研究与实现。
Secondly, this paper introduces the hardware and software design of AHRS based on ARM.
其次，介绍了基于嵌入式系统的微惯性航姿系统的硬件和软件设计。
A vibration signal collecting system based on ARM and FPGA is introduced in this paper.
本文论述了一种基于ARM和FPGA的振动信号采集系统。
Embedded system based on ARM is composed of MCU, memory, JTAG circuit and power supply.
基于ARM的嵌入式系统的核心部分包括处理器、存储器、JTAG电路和电源部分。
System of locomotive bearing fault diagnosis based on ARM embedded System was introduced.
介绍一种基于ARM嵌入式系统和机车轴承诊断系统。
The home medicaltelemonitoring system based on ARM MPU series(S3C2410)and CATV modulator is proposed.
提出了一个由ARM系列微处理器S3C2410和CATV调制模块构成的家庭远程医疗监护系统。
This paper introduces a new design for four axes control system based on ARM and high-speed Pulse Generator.
提出了一种新的基于ARM的嵌入式四轴数控系统的设计。
This subject has realized an embedded system with WEB SERVER based on ARM chip and embedded operating system.
本课题实现了一个基于ARM芯片和嵌入式操作系统的带有WEBSERVER的嵌入式系统。
The control system structure and mechanical architecture of self-tracing robot car based on ARM were outlined.
概述了基于ARM的自寻迹机器人小车控制系统结构以及机械架构。
This paper introduces a new type of ultrasonic dental descaler measuring system based on ARM embedded technology.
介绍一种新型的基于ARM嵌入式技术开发的超声洁牙设备检测系统。
This paper introduced a new type of ultrasonics dental descaler measuring system based on ARM embedded technology.
介绍一种新型的基于ARM嵌入式技术开发的超声洁牙机检测系统。
Ports to systems like this made quite a buzz when Sharp introduced its Zaurus handheld based on ARM processors and Linux.
当夏普推出了它基于ARM处理器和Linux的Zaurus手持系统时，到这类系统的移植引起了相当多的议论。
Based on ARM microprocessor, LINUX and MCU, lighting control console with DMX512 protocol is presented in the paper.
本文提出了采用ARM、LINUX和单片机共同构成了先进的基于DMX512协议的调光台。
This thesis USES the EBD9200 development board to port and realize various embedded filesystem based on ARM architecture.
本论文以EBD9200开发板为平台，实践多种嵌入式文件系统在ARM构架上的移植与实现。
The embedded test system is designed based on ARM micro-controller according to the integration of bionic navigation system.
针对仿生导航系统集成化的需要，设计了基于ARM的嵌入式测试系统。
This paper introduces the hardware design and the position control method of a valve positioner based on ARM microcontroller.
介绍了一种基于ARM的智能阀门定位系统的硬件设计和定位控制方法。
This paper present the design of an embedded system based on ARM and its application in FMS(Flight Motion Simulation) System.
本文详细介绍了基于ARM构架的嵌入式系统的构建方法及其在飞行转台系统中的应用。
Based on ARM, the paper introduces a net-intelligent auto guard system against theft. GPRS and GPS are adopted in the system.
基于先进的ARM技术，采用GPRS通信网络以及全球定位系统提出了一种网络型智能汽车防盗系统。
Based on the fully analysis of old system, this paper proposes an entirely new solution which is based on ARM embedded system.
本文在充分分析现有系统的基础上，为变电站防误系统提出了基于ARM嵌入式系统的全新解决方案。
Against this background, the paper did the research on motor fault analysis system, which is based on ARM embedded microprocessor.
在此背景下，本文进行了基于ARM的嵌入式电机故障诊断系统的研究。
A high-powered ultrasonic testing system based on ARM and DSP was provided, and the circuit conjunction of the main interface was analyzed.
提出了一种基于ARM与DSP方案的高性能超声探伤仪，并分析了关键接口电路。
This is why a lot of handheld devices have been based on ARM processors such as the Compaq (now Hewlett-Packard) iPAQ line of handheld computers.
这就是为什么许多手持设备一直基于ARM处理器的原因（例如Compaq（现在是惠普）的iPAQ 手持电脑产品线）。
A signal acquisition system for laser-based sonar detection system is constructed based on ARM embedded processor and real-time operating system.
文中还给出了采用ARM嵌入式处理器结合嵌入式实时操作系统构建的激光探测信号采集系统。
Ultrasonic wind velocity measurement with time-difference method and wind velocity measurement system based on ARM micro-controller were introduced.
介绍了超声波时差法风速测量的基本原理，以及基于ARM微控制器的风速测量系统的实现方法。
Intelligent lighting network system was introduced, with emphasis on the design of intelligent lighting controller based on ARM microcontroller LPC2104.
介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
A design scheme of a mobile node based on ARM micro-processor is introduced in this paper. The principle graphic of hardware based on LPC2214 is presented.
介绍了基于ARM微控制器的移动传感节点的设计方案，给出了以LPC 2214为核心的硬件设计的原理框图。
Introduces intelligent lighting network system, and sets forth the design of intelligent lighting controller based on ARM microcontroller LPC2104 in detail.
简单介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
Introduces intelligent lighting network system, and sets forth the design of intelligent lighting controller based on ARM microcontroller LPC2104 in detail.
简单介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
应用推荐