High quality viscose fabric tapes in combination a strong synthetic rubber based adhesive.
是由高品质的纤维与强力合成橡胶压敏胶构成。
A butyl rubber based adhesive for hot melt application as sealant for cavity-glass was prepared.
采用丁基橡胶研制了用于中空玻璃单道密封的热熔胶。
Sodium hydroxide, milk of lime, and sodium silicate with various proportions were used to modify soy flour-based adhesive.
利用石灰乳、氢氧化钠、硅酸钠等化学药剂按不同配制比例对豆粉进行改性，制备豆胶；
Material Purpose or Function: UZIN le 44 New is water-based adhesive for linoleum in strips, cork linoleum, as well as for corking.
新优成le44黏胶剂是适用于带状油布，软木油布以及软木的水性黏胶剂。
We provide hot melt adhesive: water-based adhesive and PUR adhesive, animal glue products apply for various types of the printing industry.
波士胶为印刷行业提供相关的热熔胶、水胶、聚氨酯、动物胶等产品，不仅满足各类应用，提供专业的粘合解决方案。
Just because isocyanate in the hardener could react with H2O, isocyanate compound could not be used by directly mixing with water-based adhesive.
由于异氰酸酯基能与水发生反应，异氰酸酯系化合物不能与水系胶粘剂直接混合使用。
The copolymers are widely used as elastomer, film, foam, coating, hot-melt adhesive, water-based adhesive, textile sizing agent, fabric coat and so on.
醋酸乙烯酯共聚物用途广泛，可用炸弹性体、薄膜、泡沫、涂料、热熔胶、水性粘合剂、纺织上浆剂、织物涂层等。
Or cut a patch from waterproof nylon fabric and apply a urethane-based adhesive to the coated side of the patch. Follow directions on the adhesive label.
或者剪一块防水尼龙织物并用黏合剂贴在补丁的外面。根据黏合剂的标签指示来做。
In this paper, the problems related to-for mutation design, preparation technology and general properties of a new modified SBS solvent-based adhesive are discussed in detail.
详细论述了一种新型改性SBS溶剂型胶粘剂的配方设计、制备工艺、基本性能等有关问题。
Attempts continued into the 20th century, when Norwegian scientists tried applying a gelatine-based adhesive that shrank when it dried, peeling the scrolls' layers apart in the process.
进入20世纪，尝试依旧继续。挪威科学家采用明胶为主的粘合剂，想在轴卷干燥收缩的过程中一层层剥落。
Selectamark's technology also USES microdots, though instead of celluloid it employs polyester or a nickel-based alloy, depending on the type of adhesive involved.
Selectamark公司的技术也是用微粒，虽然用聚酯或者镍基合金代替明胶，使用何种微粒与粘着剂的类型有关。
Based on this law, a distributing shape formula of the adhesive stress expressed by using a mathematical equation is also obtained.
以此规律为基础，拟合成了用数学方程表达的粘接应力分布形态公式。
Based on this study, a adhesive transfer mechanism is proposed for the formation of transferred films during sliding wear in this paper.
在这一研究的基础上，本文对滑动摩擦转移膜的形成提出粘着转移机制。
Research released by the Massachusetts Institute of Technology describes an adhesive patch that can deliver a triple-combination of drug, gene, and light-based therapy to colorectal tumors.
由麻省理工学院发布的研究成果表明用一种能够提供药物、基因和光疗三联疗法的贴片可以用来治疗结肠癌。
An adhesive wear model based on fractal parameter is derived on the grounds of adhesive wear theory by modifying the M-B fractal contact model.
在对M - B接触分形模型改进的基础上，根据阿查得粘着磨损理论导出了基于分形参数的粘着磨损模型。
The water based coating has many of advantages, for example: good adhesive, water resistant, cheap, easy synthesis and construction.
该涂料粘附力强，具有优异的耐酸碱性和耐水性，生产工艺简单、施工方便、成本低廉等特点。
The high temperature resistant adhesive was prepared based on liquid polybutadiene epoxy resin(ELPB) cured by pyromellitic dianhydride(PMDA) and benzoyl peroxide(BPO).
采用均苯四甲酸酐（PMDA）和过氧化二苯甲酰（BPO）双固化剂固化聚丁二烯环氧树脂（ELPB），制备了ELPB/PMDA/BPO耐高温胶粘剂。
The aging effect of adhesive can be measured based on the time-temperature equivalence principle.
可以根据时温等效原理来衡量胶水长时间后的老化效应；
Based on the adhesive fracture test results of new and old concrete of the authors, a toughness model of adhesive interface of new and old concrete is put forward.
在新老混凝土粘结面断裂性能试验的基础上，建立了新老混凝土粘结面断裂破坏模式，分析讨论了界面层特性及界面微裂缝扩展对新老混凝土粘结面断裂性能的影响。
Based on experimental data, adhesive length, the number of layers and sticking technology, and the effects of the parameters are discussed, and the bond mechanism is described.
探讨了碳纤维布的粘接长度、层数、宽度比以及粘贴工艺等不同粘接参数对复合构件粘接性能的影响，初步描述了碳纤维布与钢构件的粘接机理。
The convenient adhesive with good properties for polypropylene foam material was prepared here, based on graft polymer from chlorinated polyethylene and maleic anhydride.
以氯化聚乙烯接枝马来酸酐的接枝物为基料，制得性能优良，使用方便的聚丙烯发泡材料用粘合剂。
He product based on phenolic resin as adhesive with mineral filler and other additives is processed into thermosetting plastics.
本产品以酚醛树脂为粘合剂，加入矿物填料及其它添加物而制成的热固性塑料。
In this paper, using ground-based simulation facilities, the vacuum thermal cycling test was carried out on the epoxy construction adhesive.
本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。
With the improvement of people's living and the enhance for awareness of environmental protection, waterborne polyurethane adhesive will replace solvent-based polyurethane adhesive inevitably.
随着人们生活水平的提高和环保意识的增强，水性聚氨酯胶粘剂必然将取代溶剂型聚氨酯胶粘剂。
Inorganic fire prevention sealing, also known as speed solid-type fire plug, is quick-drying adhesive based material, to add fire retardant, refractories, etc. After grinding, mix well made.
无机防火堵料，亦称速固型防火堵料，是以快干胶粘剂为基料，添加防火剂、耐火材料等经研磨、混合均匀而成。
Adhering is a core technique and main difficulty of wood-based panel production, and adhesive is a critical element in the processing of adhering.
胶合是目前人造板生产的核心技术和难点，胶粘剂是胶合过程成败的关键因素。
The paper applies the nonlinear soil yield law of "principle of effective stress" based on porous medium to study influence of pressure distribution to adhesive force.
本文采用基于多孔介质下“有效应力原理”的土壤非线性屈服准则来研究压力分布对附着力的影响问题。
Using butyl rubber as the base material, tackifier and some auxiliary additives, the butyl rubber based hot-melt adhesive was prepared for favorable adhesiveness with PP, PC and metals.
以丁基橡胶为主体材料，加入增粘剂及其它助剂，研制了一种对PP、PC等非金属材料及金属材料皆有很好粘接性能的热熔胶。
Using butyl rubber as the base material, tackifier and some auxiliary additives, the butyl rubber based hot-melt adhesive was prepared for favorable adhesiveness with PP, PC and metals.
以丁基橡胶为主体材料，加入增粘剂及其它助剂，研制了一种对PP、PC等非金属材料及金属材料皆有很好粘接性能的热熔胶。
应用推荐