Fretting wear behavior of K417 nickel base superalloy was investigated.
研究了K417镍基高温合金的微动磨损行为。
Abstract :K418 Ni-base superalloy was melted in high vacuum arc-melting furnace.
采用高真空电弧熔炼炉熔炼，制备了K418镍基高温合金。
In this paper the role and distribution of La in the Co-base superalloy GH188 are investigated.
本文研究了镧在钴基超合金GH188中的作用及其分配。
The effects of strain rate on the matrix and precipitate phases of Ni-base superalloy have been analyzed using the theory.
结果表明，镍基单晶基体相和强化相均表现出明显的率相关性。
Low cycle fatigue (LCF) tests of a directionally solidified nickel base superalloy were conducted at elevated temperatures.
本文研究了一种定向凝固镍基高温合金的高温低周疲劳行为。
The effect of melt overheating treatment on the solidification segregation of M963 cast Ni-base superalloy has been studied.
研究了熔体过热处理对M963铸造镍基高温合金凝固偏析的影响。
This article studies a new type cobalt-base superalloy GH941 including its composition, structures and mechanical properties.
本文研究了新型钴基高温合金GH941的成分、组织及性能。
The liquid structure and melt treatment of M963 Ni base superalloy have been studied by using high temperature X-ray diffraction.
通过液态X射线衍射研究了铸态镍基高温合金M 963的液态结构和熔体处理。
GH543 cobalt-free nickel base superalloy is finally selected from the final 12 compositions extracted through theoretical analysis.
无钴镍基高温合金GH 543即是从理论分析的最终的12种成分中选择出来的。
The porous superalloy material with hollow spherical pores was fabricated by means of metal powder sintering using nickel-base superalloy powders.
采用含有机物的镍基高温合金原粉，用粉末烧结法制备了球形多孔高温合金材料。
An investigation of the surface of Ni-base superalloy powder particles in both as-atomized and as-HIP' ed conditions has been presented in the paper.
本文介绍了用扫描电子显微镜和俄歇电子谱仪观察和分析雾化态和热等静压态高温合金粉末颗粒的表面。
The effect of melt-superheating treatment at different temperatures on the nitrogen-absorption behavior of the nickel-base superalloy M963 was investigated.
研究了不同温度的熔体过热处理对m 96 3合金吸氮行为的影响。
The applicability of this method to cast nickel-base superalloy K417 is assessed and suitable life predictive methods are suggested for cast superalloy K417.
对此方法应用于铸造镍基高温合金K417的适用性进行了分析，并提出了适用于铸造高温合金K417的寿命预测方祛。
The influence of the crystal orientation of the substrate on microstructure is investigated by multi layer laser cladding with the powder of nickel base superalloy.
采用镍基合金粉，研究了激光多层涂覆过程中基材晶体取向对涂层凝固组织的影响规律。
The effect of high temperature solution treatment on the structure and properties of a directionally solidified high strength nickel-base superalloy has been investigated.
本文研究高温固溶处理对一种定向凝固高强度镍基高温合金的组织和性能的影响。
The tensile, creep and stress-rupture properties at high temperature of a cast nickel-base superalloy K46 without cobalt, as comparison with superalloy K412, were investigated.
研究了一种无钴镍基铸造 高温合金K46的高温拉伸、蠕变和持久性能，并与K412合金进行了比较。
The effect of aging treatment on the tensile strength, elongation, hardness and microstructure of a cobalt base superalloy used for pistons rings was investigated in this paper.
本文研究了不同热处理时效温度和时效时间对一种活塞环用钴基高温合金的抗拉强度、延伸率、硬度及组织的影响。
The elimination of defects and the improvement in microstructure and mechanical properties of a east Ni-base superalloy treated with hot isostatic pressing (HIP) have been investigated.
就热等静压处理对镍基铸造高温合金的缺陷消除、组织和力学性能的改善作了研究。
By means of the measurement of creep curves and microstructure observation, an investigation has been made into the microstructure and creep behaviors of FGH95 powder nickel-base superalloy.
通过进行蠕变曲线测定和组织形貌观察，研究了FGH95粉末镍基合金的微观组织结构与蠕变行为。
In this paper the effects of pouring temperature, mold temperature, inoculants, and section size on the microstructure and mechanical properties of casting nickel-base superalloy K24 were studied.
本文研究了浇铸温度、铸型温度、孕育剂和截面尺寸对K 24镍基铸造高温合金的组织和性能的影响。
A two damage variable creep constitutive model has been presented for the strength and life of nickel base single crystal superalloy turbine blades.
本文提出双参数蠕变损伤模型用以模拟镍基单晶合金叶片的强度和寿命。
The anisotropy of compression creep strength in a nickel-base single crystal superalloy was investigated.
研究了镍基单晶高温合金压缩蠕变强度的各向异性。
Effect of pressure and time of shot peening on recrystallization of nickel base single crystal superalloy was studied.
研究了喷丸压力和喷丸时间对一种镍基单晶高温合金再结晶的影响。
Effect of pressure and time of shot peening on recrystallization of nickel base single crystal superalloy was studied.
研究了喷丸压力和喷丸时间对一种镍基单晶高温合金再结晶的影响。
应用推荐