It has low melting point and good wettability to the base-metal, and contains a high-strength and high-hardness solid solution structure, with a high strength of soldering joint.
该钎料具有熔点低,对母材的润湿性好,钎焊接头组织中含有强度、硬度较高的呈弥散分布的固溶体,以及接头强度较高等特点。
Electricity, meanwhile, is delivered via a conductive brush that sweeps around a metal ring in the stationary base.
同时,固定地基上有一个(供电的)金属环,房子通过绕着此环旋转的导电刷来获得电能。
BHP Billiton Ltd., the world's largest mining company, retreated 2.6 percent to 2,292 pence as base metal prices declined in London.
矿业巨头必和必拓公司股价下跌2.6%,至2292便士,伦敦金属交易所的基本金属价格下跌。
The wood is placed on the metal base, which enables better air circulation around the flames.
木头会被放在一个金属台上,这样就保证了燃烧中良好的空气循环。
But the draining of one nation's gold credit base is not the only way in which the necessarily free movement of metal may upset the smooth functioning of the machine.
但是,一个国家的黄金信贷基数的枯竭,并不是必要的黄金自由流通导致机制运转失常的唯一途径。
Particular series of deposits including the thickness and type of layers in multilayer deposits and treatments which have been applied to the base metal.
特殊系列的堆积层(包括堆积层的厚度和层间型式以及处理工艺)已应用于基体金属。
Physical properties (such as strength, ductility and toughness) are much better in a forging than in the base metal, which has crystals randomly oriented.
锻件的物理性能(如强度、延展性和韧性)远好于基础金属,因为基础金属的晶粒是无序排列的。
BASE metal, The underlining metal to which alloying agents or metals are added.
基底金属,指合金中的主要金属成份。
The interfering effects of surfactants on the effectiveness of water soluble rust inhibitors in water base metal working fluids and water base metal cleaners were investigated.
水基金属加工液、水基金属清洗剂中表面活性剂对水溶性防锈剂的防锈作用有一定的影响。
The microstructure between alloy transition layer and base metal has been studied.
研究分析了合金过渡层与金属基体接合界面组织结构。
The mechanical properties of the weld deposit shall not lie appreciably above those of the base metal.
熔敷金属的机械性能不应高于基材的机械性能。
She was holding a teaspoon in her two hands, pressing her thumbs against it as if measuring her strength against the base metal.
她双手拿著一个茶匙,用拇指使劲按著它,好像同这块普通金属较量力气似的。
The biomineralization of base metal deposits and its geological characteristics are discussed.
着重讨论层控贱金属矿床的生物成矿作用及其有关的地质特征。
If the plating runouts are blended or machined to remove the abrupt plating edge, the techniques must be well controlled to avoid damaging the adjacent base metal.
如果必须将镀层上过渡段融合或切削掉来去除镀层的凸变边沿,工作人员必须严格控制,防止损伤临近的本体金属。
Heat damage generally is removed by carefully machining the base metal. Afterward, another temper etch inspection is done to ensure that the machining did not create more heat damage.
去除热损伤的方法是仔细切削本体金属,然后,再做一次回火刻蚀检查,确保切削工作没有产生进一步的热损伤。
The result shows that the bond between surfacing weld and base metal is metallurgical bond, and bond line is clear.
结果表明,喷焊层与基体是冶金结合,结合线清晰。
Different base metal alloy has the different melting point and linear coefficient expansion.
不同的基底合金具有不同的熔点及线膨胀系数。
Glass smelt erodes the base metal and dissolves surface oxides, and produces many crystalline phases.
玻璃熔体侵蚀基体金属,溶解表面氧化物,生成大量氧化物结晶相。
Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal.
非电动的贱金属铃、钟、锣及类似品;贱金属雕塑像及其他装饰品;贱金属相框或画框及类似框架;贱金属镜子。
Nonferrous materials have a base metal other than iron and include aluminum, magnesium, zinc, lead, bismuth, copper, and a variety of alloys.
有色金属材料以不是铁的金属为基材,包括铝,镁,锌,铅,铋,铜和很多合金。
Filler materials: For welding, base metal matching filler materials shall be used.
填充材料:对于焊接,应使用与基材相匹配的填充材料。
Ferrous tool materials have iron as a base metal and include tool steel, alloy steel, carbon steel, and cast iron.
黑色工具材料以铁为基材,包括工具钢,合金钢,碳钢,铸铁。
For the bar and wire endless rolling process, the welded area is required to have similar properties as the base metal.
棒线材的无头轧制工艺,要求焊接部位与基体具有同样的性能。
WF40 coating is the epoxy glass flake coating with thermal expansion efficient close to that of base metal and high resistance to the thermal shock.
WF 40涂料为环氧型玻璃鳞片涂料,其热膨胀系数与钢质基体接近,因此具有耐热冲击性强等优点。
The results show that certain thickness of the base metal and the regime of heat treatment will increase the peak hydrogen concentration and promote the tendency of disbonding.
结果显示,一定的母材厚度和焊后热处理条件,使熔合线附近氢浓度峰值提高,从而使氢剥离倾向增大。
The fracture toughness of the weld metal is lower than that of the base metal and the fracture toughness of heat-affected zone (HAZ) is intervenient between those of weld metal and base metal.
接头焊缝金属的断裂韧度显著低于母材,而热影响区断裂韧度则介于母材和焊缝金属之间。
Through-thickness cracking also can lead to fatigue or stress corrosion cracking of the base metal beneath the plating.
还会形成穿透型裂纹,造成镀层下本体金属的疲劳或应力腐蚀裂纹。
The influences of strength matching on fillet weld were analyzed. The relationships among fillet weld size, thickness of base metal and matching coefficient of strength were established.
分析了强度匹配对角焊缝设计的影响,建立了角焊缝焊脚尺寸与板厚,强度匹配系数之间的关系,讨论了强度匹配选择的依据。
The hydrostatic pressure explosion test on vessel indicates tha both base metal and weld metal have good comprehensive mechanical properties.
容器的液压爆破试验证明,母材和焊接接头具有良好的综合力学性能。
A polyisocyanate curing agent, which is mainly composed of toluene diisocyanate (TDI) trimer, was prepared in the presence of the base metal carboxylate K-1000.
以一种碱金属羧酸盐k - 1000作为甲苯二异氰酸酯(TDI)三聚反应的催化剂合成了以TDI三聚体为主要成分的多异氰酸酯固化剂。
应用推荐