This formula gives a theoretical basis for the calculation of applied load in bar stress severing method.
该公式为应力断料时的预荷力计算提供了理论依据。
Vertical and annular reinforcing steel bar stress and pipe-soil contact pressure during pipe jacking were monitored on the spot.
对顶进过程中管道纵向与环向钢筋应力及管土接触压力进行了现场测试。
Maybe we drag ourselves to the local bar to hang out with some friends and eat, drink, and watch the news on TV – which adds its own layer of stress – hoping our feelings will just disappear.
或许我们会拖着身体去本地的各种吧去和朋友约会，吃吃喝喝，看看电视上的新闻，或许希望这种疲惫会烟消云散，但这些都是徒增自己的压力。
If you have ever had the unfortunate incident of losing a cell phone - maybe accidentally leaving it in a bar - you probably know the frantic stress that can come with searching for the device.
如果你曾经有过丢失手机的不幸遭遇——也许是不小心把手机落在酒吧里——你可能就知道寻找手机时的焦躁不安的心情。
The relationship of stress and strain of corroded steel bar based on the results of testing and analysis is presented.
根据试验结果与分析结果的统计分析，提出锈蚀钢筋的应力与应变关系。
By applying a matrix approach, the stress wave propagating in an elastic bar is studied.
应用矩阵方法，研究了应力波在弹性杆形部件中的传输特性。
As the bolt tension increase, the tension of rail web, stress of joint bar and stress of joint bolt would increase accordingly, but the displacement of rail would become smaller.
螺栓扭矩增大，接头区钢轨轨腰拉力、夹板应力、螺杆内应力都会增大，而钢轨位移会随着螺栓扭矩的增大而减小。
Objective: To investigate the influence of ball or bar attachments on stress distribution of the mandibular implant-supported overdenture.
目的：探讨球形、杆式附着体对全下颌种植覆盖义齿应力分布的影响。
Results: the stress values of the ball attachment in the palate area, alveolar bone and implant bone interface were much higher than that of the bar attachment.
结果：发现杵臼附着式固位的种植赝复体在行使功能时其腭部、牙槽骨、种植体周围骨界面的应力值均远高于杆卡附着式固位的种植赝复体。
Objective: The authors analyze the stress distribution of the modified and conventional bar - clip implant - borne overdeture in the edentulous mandible under static loads.
目的：分析全下颌改良杆卡式种植覆盖义齿受载的应力分布并与传统的杆卡式比较。
Then, the stress pulses can be automatically collected by computer data acquisition system via strain gauge stuck on the middle of the bar.
在杆的中部粘贴应变片，由计算机数据采集系统自动记录应力脉冲的值。
Based on plastic intensifying theory, dual-linearity material model is used to calculate stress and strain on the cross section of a torsion bar spring by FE method.
在塑性硬化强扭理论的基础上，利用双线性材料模型计算了扭杆弹簧第一次强扭过程横截面的应力和应变。
The surface residual stress of tube and bar after drawing straightening and annealing, under different processing conditions, were measured by means of resistance strain gauge.
用电阻应变片法测试了管棒材拉拔、矫直和退火过程中产品表面残余应力，研究了管棒材残余应力随工艺参数变化的规律。
The influence of embedded trilateral cross-section metal bar in the fillet on the strength and stress distribution of single lap joints was discussed.
研究了在胶瘤中嵌入三角形金属楔块对单搭接接头强度和应力分布的影响，结果表明，金属楔块能显著提高接头的强度。
New type of precision cropping machine utilizes variant frequency vibration to crop bar precisely with low stress.
新型下料机是利用变频振动实现低应力精密下料的。
In this paper, the formula for calculating stress spectra of hoping and diagonal bar is presented.
本文提出了混凝土梁斜筋和箍筋应力脉的计算公式。
In this system, the steel wires and steel bars are the main parts that bear the tensile force, the stress in the district above the dragging bar is low.
在拉杆拱体系中，梁底预应力筋和非预应力筋成为主要的受拉部分，拉杆上方成为低应力区。
So if you are under a lot of stress, go have a cola drink and a chocolate bar, then watch your skin break out.
如果你一边压力很大，一边大量吃可乐巧克力，那就等着爆痘吧！
A new type of precision cropping machine utilizes variant frequency vibration to crop bar precisely with low stress, an system of measure and control of vibration in the machine is necessary.
新型下料机是利用变频振动实现低应力下料的，针对需要建立振动的有效测控系统的问题。
In this paer, by the use of the method of characteristic line of stress wave, a prediction analysis for the sacond impact of an elastic bar impacting on a rigid block is given.
本文采用应力波特征线方法详细分析了刚体撞块撞击固支的弹性长杆的撞击过程。
Some practical formulas of nonlinear analysis are obtained for calculating the bond stress, the slip and the stress of steel bar.
得出了计算粘结应力、滑移及钢筋应力的非线性实用公式。
Experimental results show that the stress amplitude of the tensioned bar is decreased remarkably and the fatigue life is then obviously increased as compared to normal strengthening method.
试验结果表明，与非预应力碳纤维布加固梁相比，预应力碳纤维布加固后混凝土梁中受拉钢筋应力幅显著降低，混凝土梁疲劳寿命明显延长。
The schemes of reinforcing batten plates by tie bars are put forward and the effects of the space, diameter and types of tie bar on displacement and stress of batten plates are analyzed.
分析了液态混凝土压强对钢管结构的作用，指出了哑铃形钢管拱先圆管后腹腔灌注顺序的合理性，提出了缀板采用对拉杆加固的方案，并分析了对拉杆间距、直径、材质等对缀板位移和应力的影响。
Results indicate that the ultimate bond stress between bars and RPC decreases with the increase of bar diameter or with anchorage length when bar diameter is the same.
研究表明：活性粉末混凝土与钢筋的极限粘结应力随着钢筋直径的增加而下降，钢筋直径相同时随着锚固长度的增加而降低。
A pulse shaping technique has been used in split Hopkinson bar (SHPB) experiment, for ensuring the specimen in dynamic stress equilibrium and loaded under constant strain rate during the test.
在SHPB实验中，通过采用整形器技术，实现实验过程中的应力平衡和常应变率加载。
If a bar is subjected to an axial load, and hence a stress, the bar will change in length.
如果一家酒吧受到轴向负载，因此压力，酒吧将改变长度。
The paper analyses the stress wave propagating in a variable section bar using HONDO finite element computer program .
利用HONDO有限元程序对应力波在变截面杆中的传播进行了分析。
The testing results about the use of new rail joint was introduced, which include the dynamic flexure stress of upper limb and lower margin of joint bar, shearing stress of horizontally neutral axis.
本文对三种新型钢轨接头现场使用情况的测试结果进行了介绍，主要包括测点处的钢轨接头夹板上、下缘动弯应力、夹板水平中性轴处剪应力。
The test included anchoring force of prestressed anchor cable, frictional coefficients, stress of concrete and steel bar and structure deformation.
测试内容包括预应力锚索锚固力、摩阻系数、混凝土和钢筋应力以及结构变形。
The most important issue for the problem of uniform cross-section bar torsion is the calculation of shear stress on the boundary of cross-section, which is very difficult.
对等截面直杆扭转问题，横截面边界上的剪应力计算是件困难的事，也是很重要的研究课题。
应用推荐