The formulae in this paper are founded for axial piston pump whose rotor's structure is straight axis and auto-location type, but other type of pump can reference it.
文中算式以直轴自位式缸体结构的轴向柱塞泵为基本计算模型，但对于其他类型的轴向柱塞泵亦有很大参考应用价值。
Rationally define the work gear pump speed, gear and the axis of rotation to avoid engaging resonance frequency, can prevent noise intensified.
合理确定齿轮泵的工作转速，使齿轮与轴的转动避开啮合共振频率，可以防止噪声加剧。
Pump and motor direct-axis, is a mechanical-electrical integration products, compact structure, stable performance.
泵与电机直联同轴，属机电一体化产品，结构紧凑，性能稳定。
Motor and pump connection in two ways, one motor and pump mounted on the bracket as a single entity, the second is the basis set by adding a separate motor axis connected with the shaft.
电机与泵的联接有两种方式，一是电机装在与泵体连为一体的支架上，二是电机单独设基础通过加长轴与泵轴联接。
In order to achieve power steering function in fuel cell bus, an electrohydraulic system is proposed, where the pump is directly driven by a DC motor through an axis coupler.
为了实现燃料电池电动客车的动力转向功能，提出了直流电机通过联轴机构直接驱动油泵的电动液压式动力转向系统。
The main parts include pump body, pump cover, impeller, axis, sealing rings, intermediate support, sealing and suspension parts and other components.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
STG pump with stainless steel sleeve inserts used here to avoid the corrosion occurrence of increased life expectancy axis, reducing operation and maintenance costs.
STG泵此处采用镶配不锈钢轴套，避免锈蚀发生，提高了轴寿命，降低了运行维护成本。
YCB arc gear pumps are mainly gear, KCG axis, the pump body, cover, the axial bearing, sealing etc. Using double circular-arc gear tooth sine curve.
主要有齿轮、轴、泵体、泵盖、轴承套、轴端密封等组成。齿轮采用双圆弧正弦曲线齿形制造。
Pump inlet and outlet are on the same horizontal axis and of the same diameters, thus allowing easy disassembly and small occupation space.
泵进、出口在同一水平轴线上，且口径规格相同，装卸极为方便，占地面积小。
Role is to prevent the pump shell leakage of liquid along the axis or outside air leakage into the pump shell.
作用是防止泵壳内液体沿轴漏出或外界空气漏入泵壳内。
The clearance between the axis and the seal was adjusted based on the diagnosis result, and the vibration value of the pump was lowered to an allowable range.
根据诊断结果调整了轴与密封的间隙，使泵的振动值降至允许范围内。
For open or semi-open layout of the pump, general pump and prime mover so that the axis and the vertical axis of pipe gallery.
对于露天或半露天布置的泵，一般使泵与原动机的轴线与管廊轴线垂直。
The structure of traditional centrifugal pump has cancelled the axis of the sealing device, reason can accomplish completely without leakage.
这种结构取消了传统离心泵具有的旋转轴密封装置，故能做到完全无泄漏。
Precision machining pump body can make "d" type bearings and gear axle, ensure accurate gear axis gear eccentric wear, not to.
精密加工的泵体可使“D”型轴承与齿轮轴精确配合，确保齿轮轴不偏心，以防齿轮磨损。
This article presents some methods of using and maintaining of engineering mechanical hydraulic pillar-plug pump, giving an example of straight axis-oblique tray pillar-plug pump.
本文以直轴斜盘式柱塞泵为例，介绍关于工程机械液压柱塞泵使用与维修的几种新的方法。
The main products are: JP Series winch irrigation system, the transfer of irrigation system, PYC series of vertical rocker-type nozzle, QZ, QH, QSZ, QSH series axis (mixed)-flow submersible pump.
主要产品有：JP系列绞盘式喷灌机、移管式喷灌机、PYC系列垂直摇臂式喷头、QZ、QH、QSZ、QSH型系列轴（混）流式潜水电泵。
The main products are: JP Series winch irrigation system, the transfer of irrigation system, PYC series of vertical rocker-type nozzle, QZ, QH, QSZ, QSH series axis (mixed)-flow submersible pump.
主要产品有：JP系列绞盘式喷灌机、移管式喷灌机、PYC系列垂直摇臂式喷头、QZ、QH、QSZ、QSH型系列轴（混）流式潜水电泵。
应用推荐