However, in the construction process, appear easily asphalt pavement of segregation phenomenon, and sometimes even appear smooth road or have juncture appear.
然而，在施工过程中，沥青路面极易出现离析的现象，有时甚至会出现路面不平整或者有接缝出现。
The results show that the appropriate compacting technics can make the rubber modification asphalt concrete shape with Marshall Process.
研究表明：只要成型工艺恰当，马歇尔法完全能够成型橡胶改性沥青混凝土试件。
A fully automatic temperature setting routine guides the user through the grading process, making asphalt grading as easy as possible.
全自动温度设置程序引导用户分阶程序，以更容易得获得沥青分阶。
The new visbreaking process with de-oiled asphalt feedstock is discussed.
论述了以脱油沥青为原料的减粘裂化新工艺。
The foam bitumen and asphalt recycling scrap basic principles and practices of major applications, as well as features in the application process are introduced.
介绍泡沫沥青和废旧沥青再生的基本原理和主要应用做法，以及在应用过程中的特点。
The study indicated, for the good pavement technique performance, simple construction process and the reasonable price, the fiber asphalt mixtures possess good spreading and practical value.
研究结果表明，纤维沥青混合料具有优良的路用技术性能，且工艺简单、经济合理，具有很好的推广应用价值。
Construction process, drainage of asphalt concrete road surface and the corresponding drainage in the urban road are introduced, engineering example is given.
文章介绍了对排水性沥青混凝土路面、相应道路排水在城市道路中的施工工艺，给出了工程实例。
The paper mainly analyses the methods to reduce transverse joint and longitudinal joint in construction process of asphalt pavement, and introduces how to choose reasonable compacting equipment.
重点浅析了在沥青路面施工过程中尽量减少横向与纵向接缝的处理方法，以及如何选用合理的压实设备。
In productive process of paper based asphalt felt, the amount of filling material added has direct effect on physical properties of final products.
石油沥青纸胎油毡生产过程中，填充料加入量的多少会直接影响到油毡产品的各项物理性能。
This paper evaluates the quality state of mixing plant through analysis of hot asphalt producing process, can judge the mixing plant operation and determine whether adjust mixing plant.
通过分析热拌沥青拌和楼生产过程中的各个指标来评价拌和楼的质量状态，从而能够有效判断拌和楼工作是否正常，然后决定是否调整拌和楼。
This research applies central composite design and response surface methodology to optimize the process parameters of SEBS modified asphalt.
本研究应用星点设计效应面优化法对SEBS改性沥青工艺进行优化。
The porous asphalt concrete pavement demands good organization and management, other than strict control of materials, reasonable allocation of machineries and strict process.
排水性沥青混凝土路面除了必须严格控制原材料、合理配置机械设备、严格施工工艺外，施工组织与管理极为关键。
This mixture design theoretical model achieves the objectivity of design process and unification of gradation design and asphalt mixture design.
本文所建立的混合料设计理论模型，首次实现了矿料级配设计和沥青混合料组成设计的统一和设计过程的客观性。
Use traditional physical index, SHRP index and temperature sensitivity index to analyze recycling regularity in the process of mixing new asphalt and aged asphalt.
通过常规物理指标、SHRP指标和感温指标来分析新旧沥青在调和过程中的性能变化规律，帮助理解沥青再生的原理。
The effects of adding plasticizer, crosslinking agent and the blending process on the high-low temperature ductility, toughness and tenacity of asphalt were investigated.
考察了交联剂、增塑剂、制备工艺对沥青高低温性能、粘韧性、韧性的影响。
For HMA's requirement of high temperature, asphalt and aggregate need to be heated to high level in the process of construction.
HMA的拌和与施工温度要求很高，在生产过程中需要将沥青和集料加热到很高的温度。
Finally, this study analysised the asphalt mixture fatigue damage evolution process of stress control mode and established a relationship between unit load fatigue damage rate and the fatigue life.
最后，本研究分析了应力控制模式下沥青混合料疲劳试验过程中的损伤演化规律，建立了单位加载疲劳损伤率与疲劳寿命之间的关系式。
As a widely used engineering material, asphalt concrete is supposed to quasi-static load as well as action of mobile load from explosion and impact and so on during working process.
沥青混凝土作为一种广泛应用的工程材料，在其工作过程中，除承受静荷载的作用外，还要承受爆炸、撞击等动荷载的作用。
Discussion on factors affected the production of SBS modified emulsified asphalt from SBS modified asphalt, emulsifier, production process and equipments for emulsified asphalt ect.
介绍了影响SBS改性乳化沥青生产的因素，分别从SBS改性沥青、乳化剂、乳化沥青生产工艺、乳化沥青生产设备等几个方面进行了探讨。
On the basis of analyses of physical and mechanical characteristic for Crumb rubber, the process that the rubber modified asphalt concrete is taken shape at twice is brought forward.
首先对橡胶颗粒物理力学特点进行分析，在此基础上提出了二次成型橡胶改性沥青混凝土的方法；而后，进行了不同温度下橡胶改性沥青混凝土室内成型工艺研究。
Results We can learn the relation of asphalt and the wall rock, the asphalt's cause of formation, the time of forming the asphalt, the process of forming the asphalt.
结果：让我们清楚的了解到沥青脉与围岩的关系，沥青脉的成因、形成时期、形成过程。
A new process for producing roofing asphalt from petroleum residua by steam cracking and condensation has been studied in the laboratory.
在实验室中研究了一种从石油残渣油制取建筑沥青的新工艺——水蒸汽裂解缩合。
This paper introduces the quality of asphalt pavement cold paving technique and analyzes the form, production process, production demand and construction technology of cold paving materials.
介绍了沥青路面冷补技术的性能特点，对沥青路面冷补材料组成、形成过程、生产要求和施工工艺作了详细的说明。
Low density polyethylene (LDPE) modified asphalt dispersed finely in asphalt is prepared by two step blending process.
采用二阶共混法制备了能在沥青中微细分散的LDPE改性沥青。
The invention also relates to the preparation process of the modified asphalt.
本发明还涉及制备所述改性沥青的制备工艺。
SF series of road asphalt joints adhesive tape was produced with a variety of polymer materials and additives, using specific process conditions.
SF系列道路接缝粘结胶带是采用沥青、多种高分子材料及多种添加剂，在特定的工艺条件下复合制成的聚合物密封接缝胶带。
In the process, construction companies are draining wetlands and covering formerly vegetated soils with asphalt, concrete and housing materials.
兴建过程中，建商会排干湿地，将沥青、混凝土、房屋建材覆盖在原本生长植物的土壤上。
The article introduces the process and the equipment of a first continuously roll -splitting asphalt shingle production line that is domestically designed and manufactured.
介绍了我国自行设计、制造的第一条连续辊切式油毡瓦生产线的工艺和设备。
The ageing process and regularity of the asphalt coating have been studied with indoor artificial accelerated ageing test.
为此，采用室内人工加速试验方法，研究了石油沥青涂层的老化过程和规律。
The ageing process and regularity of the asphalt coating have been studied with indoor artificial accelerated ageing test.
为此，采用室内人工加速试验方法，研究了石油沥青涂层的老化过程和规律。
应用推荐