PLC is adopted as main controller and touch panel is used as the interface to observe and control the system.
系统采用了P LC作为控制部分的主控器件，将触摸屏作为系统观测和控制的界面。
A switched reluctance motor (SRM) drive system used in electric vehicles was designed, which utilized TMS320LF2407 as main controller.
设计了以TMS320 LF 2407为主控制器，电动汽车用开关磁阻电动机数字化驱动系统。
Using Programmable logic controller S7-200 as main controller, cooperated with hydraulic pressure station, the belt conveyor breaker is controlled.
利用可编程序控制器s 7- 200作为主控制器，配合液压站实现了对带式输送机制动器的控制。
This paper USES S7-200 PLC as main controller to design a dehumidifier control system, which is equipped with HMI TD400C and communication module EM277.
采用西门子s7- 200PLC为主控制器，配以人机界面TD 400c和通信模块EM277，设计了某除湿机控制系统。
In the design and construction of refrigeration and air-conditioning synthesis system, the full automatic control is done by adopting S7-200 PLC as main controller.
在制冷空调综合系统的设计建设中，采用S7- 200型PLC作为系统的主控制器，对能实现制冷和中央空调实验实训的综合实验室进行全自动控制。
The waveform generator is composed by DSP and quadrature digital upconverter (QDU). DSP is used as main controller to decide the modulation mode and output waveform of QDU.
波形产生器主要由dsp和数字上变频器构成，DS P作为主控制器设定数字上变频器的调制方式和输出波形。
The algorithm is applied to control the product composition of a CSTB, as main controller of the cascade and ratio control system, to demonstrate the implementation of the...
本文还以混合釜成分串级比值控制系统为例，介绍了实现该控制算法的成分数字调节器的具体方法。
So, the thesis adopts a type of low loss DSP processor as main controller which composing the control and fault feeder detection system based on DSP in order to deal with the question.
因此论文采用了低功耗的数字信号处理器作为主控芯片，构成一种基于数字信号处理器的控制与选线系统。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
The system is consisted of a CPU226 as main controller, a touching screen as HMI and some transducers as operating devices. The system has many advantages, such as easy operating and high reliability.
该系统以CPU226为控制主机、以触摸屏为人机界面、以变频器为主要操作对象，具有操作简单、可靠性高等特点。
As the name implies, the MVC has three main parts, the Model, the View, and the controller.
正如名称所蕴含的，MVC具有三个主要部分，Model(模型)、View(视图)和Controller(控制器)。
White boxes are interchangeable, and the main application may assign any machine in the cluster as the controller, and this one in turn assigns map or reduce tasks to other connected white boxes.
白盒子是可互相交换的，主应用程序可能把集群中的任何机器指派为控制者，而这个机器就把map和reduce任务分派给其它连接的白盒子。
The missile rudder servo controller adopts TMS320F2812 as main CPU, IR2110 as drive chip. Each part of main circuit is analyzed in detail.
以TMS320F2812作为主控CPU，以IR2110作为驱动芯片，完成了导弹舵机伺服控制系统的硬件设计，进行了控制器主电路的分析与设计。
In the plan of design, the fourth generation of IPM is used as the main half-bridge circuit and TMS320LF240X DSP with good performance and strong function is used as a controller.
在设计方案中，采用第四代IPM作半桥主电路，以性能好、功能强的数字信号处理器TMS320 LF 240 X DSP为控制器。
The basic operational principle of the force-position type sensing system is introduced and the composition of the system with 8031 single chip computer as the main controller is described.
介绍力-位置型力感觉系统的基本工作原理，阐述以8031单片机为主控制器的系统构成。
The system adopts 80C31 MCU as the main controller, hybrid Rare-Earth permanent magnet stepper motor as the execution component, bio-passage rotary transformer as antenna position sensor.
该系统基于80C31单片机为主控制器，采用了混合式稀土永磁步进电机为执行部件，并以双通道旋转变压器为天线位置传感器。
It expounds the software and hardware designing schemes and main points as well as explains the application of the CAN bus controller-SJA1000.
阐述该系统软、硬件的设计方案和设计重点；讲解CAN总线控制器SJA1000的应用。
The hardware is based on S3C4510B as the main controller, which has powerful Internet function and many interfaces to remote control local equipment.
硬件部分以针对嵌入式应用的S3C4510B微处理器作为主控制器，利用S3C4510B强大的网络功能和众多外设接口实现对现场设备的远程控制。
The WATSN series automatic transferring switch of power supply (ATS) and its structure features as well as main specifications were introduced, especially the operating principle of the controller.
系统地介绍了施耐德万高公司生产的WATSN系列自动转换开关（ATS）的结构及特点、性能指标及主要技术参数等，并着重阐述了其控制器的工作原理。
A numerical PID control system which USES 8098 single chip microcomputer as its main controller is introduced in this paper.
本文介绍一种以8098单片机为主控制器的数字PID控制系统。
To satisfy demand for uninterrupted power supply, the developing scheme of double power switch controller taking M68HC908SR12 controller as main control chip was introduced.
针对不间断供电的需求，介绍了一种以m 68hc 908sr12单片机为主控芯片的双电源转换控制器的研制方案。
As for software design, this paper designs the program of main controller and that of touch sense key controller from the perspective of modular design.
设计了搜救器的软件，按照模块化编程思想设计了主控制器程序和触摸按键控制器程序。
With S7-300 PLC as the main controller, has designed a modular pump house drainage control system.
设计了以S7- 300PLC为主要控制器的模块化泵房排水控制系统。
This article introduces an available control system for the huge hydraulic press machine tool by means of a personal computer (PC) as the main controller.
本文介绍了一个采用个人电脑（PC）作为工业控制系统的主控机来控制大型锻压机床的成功例子。
In terms of hardware, according to the special requirements of the working environment, the project use the ARM processor as the main controller, and use monochrome LCD.
硬件方面，根据编组站工作环境的特殊要求，课题采用了ARM处理器作为主控制器，并采用单色LCD作为显示单元。
The controller main-board is designed with TMS320F2812 as its CPU, and also sets the serial interface and input and output of the switching value on it .
利用TMS320F2812作为CPU设计了控制器主板，同时引出了串口和开关量输入输出模块。
A embedded PV MPPT control scheme is proposed with ARM7 processor (AT91SAM7S64) as the main control chip. The system consists of sun-tracking device and two-dimensional plane support controller.
以ARM7处理器(at91sam7s64)为主控芯片的嵌入式光伏MPPT控制方案，由太阳跟踪器和二维平面支架控制器组成。
The filtrate loss controller for drilling fluid is prepared by one step method using alkaline paper making black liquor as main raw material.
以碱法造纸黑液为主要原料，经过一步合成工艺制备钻井泥浆降滤失剂。
Responsible for the acquisition of external signals, as people's eyes, when a moving object into its work range, it will give the main controller a pulse signal.
负责采集外部信号，如同人们的眼睛，当有移动的物体进入它的工作范围时，它就给主控制器一个脉冲信号。
Responsible for the acquisition of external signals, as people's eyes, when a moving object into its work range, it will give the main controller a pulse signal.
负责采集外部信号，如同人们的眼睛，当有移动的物体进入它的工作范围时，它就给主控制器一个脉冲信号。
应用推荐