Argon arc welding of aluminum alloys.
铝合金气焊、氩弧焊用。
Argon arc welding labor 5: Has the welder card.
检验员3名。氩弧焊工5名：有焊工证。
Gas welding and argon arc welding of pure aluminum.
铝合金气焊、氩弧焊用。
We use TIG (argon arc welding) to produce bicycle frames.
钛合金车架采用无氧钨极氩弧焊接工艺。
Argon arc welding of copper alloys and surfacing of steel.
铜合金氩弧焊及钢的堆焊用。
Products are mainly used for arc welding, argon arc welding and other fields.
产品主要用于电弧焊、氩弧焊等领域。
Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
耐蚀，强度高。铝合金氩弧焊用。
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用。
Accessory Configuration: Air cooling argon arc welding gun, argon pressure reduction flow meter.
附件配置：水冷或气冷氩弧焊枪，氩气减压流量计。
Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
机械性能好，抗裂性好。紫铜气焊及氩弧焊用。
And it enumerates the troubleshootings in WSE-500 multi-function pulsed tungsten argon arc welding.
例举了WSE- 500多功能脉冲钨极氩弧焊机故障排除的事例。
Perfect to replace the traditional argon arc welding, soldering, imitation of laser welding technology.
完美取代了传统的氩弧焊、锡焊、仿激光焊等工艺。
Therefore, the stain-less steel hip flask adopts argon arc welding technique, it is the initiate of home.
其中，不锈钢酒壶采用氩弧焊工艺，系国内首创。
And we have CNC, CJK, Punch press, high-frequency heating machine, argon arc welding machine , drilling machine….
拥有数控车床，冲床，仪表车，锯床，高频电热机。脉冲氩弧焊机，电焊机，钻床等设备。
Accessory Configuration: Water cooling or air cooling argon arc welding gun, argon pressure reduction flow meter.
附件配置：水冷或气冷氩弧焊枪，氩气减压流量计。
Application of argon arc local strengthen can increase hardness and high-temperature wear resistance of the ring groove.
采用氩弧局部强化可提高环槽的硬度和高温耐磨性。
Complete functions, wide application scope, it features the functions of ordinary DC manual welding and argon arc welding.
功能多，适用范围广，具有普通直流手工焊及氩弧焊功能。
Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
抗裂性好，通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金。
Welding, as far as possible using argon arc welding, manual arc welding should be used in small current, fast welding, to avoid the swing.
焊接时尽量采用氩弧焊接，采用手工电弧焊时应采用小电流、快速焊，避免摆动。
This paper relates the method of excluding malfunction of current decline movement in WS-200 tungsten argon arc welding by parallel capacity C.
讲述了并接电容排除W S-200钨极氩弧焊电流衰减动作失灵的方法。
The argon arc welding process after replacement of intercooler cooling section was presented. The welding feature and weldability were analyzed.
介绍了中冷器抽换散热单节的氩弧焊接工艺，分析了中冷器抽换散热单节的焊接特点以及焊接性。
The result shows that this technology can be used in argon arc welding for different type of stainless steel. It has been successfully applied i…
结果表明，应用该项技术可以满足不同规格不锈钢材料的氩弧焊接，已成功应用于某型一次锌氧化银电池的生产焊接工序中。
The deuterium lamp as a radiometric transfer, the comparison of synchrotron radiation and wall stabilized argon arc plasma radiation was performed in 165-350 nm.
以石英窗口氘灯为传递标准光源，在紫外及真空紫外辐射区完成了同步辐射和壁稳氩弧两种基准之间的对比。
In order to fix the stator core of the generator, the argon arc welding is effectively utilized. In this paper the welding equipment and technology are presented.
采用氩弧焊接方法实现汽车发电机定子铁心的紧固，效果良好。介绍了焊接设备和工艺。
Nickel rod needs to be lengthen by argon arc welding before the electroslag refinements, large welding parameters are needed to assure the sufficient penetration.
金属镍在电渣精炼前需用氩弧焊焊接接长，为保证焊接接头具有足够熔深，需要大参数进行焊接。
Methods: Electrochemical technique was adopted to detect the changes of anode polarization curves of TA2 and TC4 after welding with laser or pulsed tungsten argon arc.
方法：采用动电位极化技术，分别测定激光焊接及脉冲氩弧焊接TA2和TC4后，材料阳极极化曲线的变化。
The chemical composition, mechanic property, weldability and corrosion resistance of argon arc welding wire for low carbon steel pipe line are contrasted and analyzed.
对低碳钢管线用的氩弧焊丝的化学成分、机械性能、可焊性能、耐腐蚀性能进行对比分析，为合理选用焊丝提供了依据。
The regular corrosive patterns of carbon steel in hydrofluoringe acid are mentioned. The reasonable selection of carbon steel and carbon steel argon arc welding wire are introduced.
论述了氢氟酸对碳钢的腐蚀规律，并介绍了碳钢设备和碳钢氩弧焊丝的合理选材。
Including: Sawing, punching, turning, drilling, tapping, milling, polishing, wire-drawing, CNC processing, bending, forming and other deep processing, argon arc welding and assembly.
包括：锯切、冲压、车削、钻孔攻丝、铣、焊接、抛光、拉丝、数控加工、弯曲、成型等深加工、氩弧焊接、装配。
This paper introduces the repair welding procedure for repairing an alumal casting piece of an oil pump cylinder, This method covers the shortages of AC argon arc weld and gas welding.
介绍了对油泵机缸体铝锰合金铸造件缺陷补焊修复的技术工艺，且弥补了若采用交流氩弧焊和气焊施焊时存在的不足。
应用推荐