In order to initiate the LP without arc formation, effects and coupling of electric pulse characteristics, ignition configuration parameters on LP ignition property are investigated.
实验研究了实现无电弧点火、限制电弧放电所需的电源特性参数及点火结构参数。
The results show that the secondary atomization of fuel brought by oriented arc can improve mixture formation and combustion.
结果表明，在导向圆弧的作用下产生的燃油二次雾化，大大加速了混合气的形成和燃烧。
Its formation was controlled mainly by the condition of terrestrial heat. Their main formation models are related to continental collision, continental extension and continental arc.
它的形成主要受地热条件的控制。麻粒岩的形成可以与大陆碰撞、大陆拉张以及大陆弧模式相联系。
In addition, the mechanism of the T-TIG arc pressure reduction to make the sound weld formation was analyzed.
此外，在焊接试验的基础上，进一步对双钨极氩弧焊降低电弧压力、减少焊接缺陷的机理进行了分析。
Phase transition, enhanced diffusion and Y-Al alloy formation are studied using Y implantation with high current extracted from metal vapor vacuum arc (MEVVA) ion source.
利用金属蒸汽真空弧（MEVVA）源所产生的强束流离子注入铝研究了相变、增强扩散和钇铝合金的形成条件。
This paper focus on the basic characteristics of Lebaquan-Gongpoquan epicontinental arc and the dynamic background for its formation in the contiguous area across Gansu, Xinjiang and Inner Mongolia.
文中着重讨论了勒巴泉—公婆泉陆缘弧的基本特征及形成的动力学背景。
In the rear part of every arc zone the basin-model sedimentation occurs. It is favourable for the formation of sedimentary mineral resources.
每个弧带的后部，产生盆地型沉积，有利于沉积矿产的形成。
According to different oxidation conditions, anodic oxidation can be divided into general anodic oxidation, micro arc oxidation, the formation of titanium dioxide nanotubes.
根据氧化条件的不同，阳极氧化又可以分为一般阳极氧化、微弧氧化、二氧化钛纳米管的形成。
To improve the surface quality of flexible formation using plasma arc, its heat-flow density on unit area is controlled by controlling the swinging of the plasma arc with the alternate magnetic field.
为进一步提高等离子体弧柔性成形的表面质量，利用磁场控制弧柱的摆动状态进而控制单位面积上等离子体弧的热流密度，使之达到预期目的。
The formation causes of these carbon nanostructures were analyzed separately, and the effect of each arc conditions was also analyzed.
分别对各种碳纳米结构的形成原因进行了分析，并分析了各种放电条件对不同碳纳米结构生成的影响。
In this thesis, a series of experiments involving chlorine were carried out in a graphite arc-discharge reactor and the study focus on the influence of chlorine on the formation of fullerenes.
针对富勒烯科学所面临的这些问题，本论文通过在石墨电弧放电反应中引入氯源，进行了一系列的有关氯参与下合成富勒烯的实验，重点考察了氯对富勒烯形成的影响。
The formation mechanism of carbon nanotubes coated with metallic nano-particles by using anode-arc discharge method was analyzed.
分析了阳极弧等离子体法合成碳纳米管内包覆金属纳米粒子的形成机理。
Rifting played an important role in formation of the back arc basins.
裂陷作用也控制着弧后盆地的形成。
The analysis of sedimentary formation suggests the existence of groove-arc-basin system at the middle Carboniferous.
结合上述事实，通过沉积建造分析，该区在中石炭统曾存在沟弧盆体系。
In the rear part of every arc zone the basin-model sedimentation occurs. It is favourable for the formation of sed...
每个弧带的后部，产生盆地型沉积，有利于沉积矿产的形成。
The interaction of the main factors controlling the formation of sequence stratigraphy in arc and back arc basin systems was primarily summarized.
初步总结了岛弧-弧后盆地体系中的层序地层主控因素相互作用的规律。
One-step methods consist of arc-discharge method, electrolytic formation techniques, template-assisted method and pyrolysis of organometallic precursors, etc.
一步法主要包括电弧放电法、熔盐电解法、模板法和热解金属有机物法等四种。
Gejiu Formation in Triassic was mainly comprised of dolomite, limestone and mudstone, belonging to the sedimentary sequences of Gejiu-Napo back-arc rift basin under the regime of thermal subsidence.
中三叠个旧组以白云岩、灰岩和泥岩为主，属于个旧-那坡弧后裂谷盆地热沉降背景下形成的沉积序列。
If this arc voltage saltation information can be extracted, we will get the characteristic information of necking down formation.
若能从电弧电压信号中提取出拐点发生时突变的信息，则可望提取到缩颈发生的特征信息。
As shown in the physical model, the stability of arc plasma and the directionality of carbon particles played important roles in the formation of carbon nano-structures.
根据液体电弧放电模型可知，电弧的稳定性和碳粒子运动的定向性对纳米结构的生成过程有重要影响。
The formation of this back arc basin was related to the spreading and northward subduction of the Paleo Tethys oceanic basin along the line from the Xijir Ulan Lake K…
这一弧后盆地的形成与沿西金乌兰湖—空喀山口至乔戈里峰一线的古特提斯洋盆的扩张及向北俯冲、消减相联系，构成了塔里木板块南部晚古生代活动大陆边缘。
The result shows that the temperatures of molten pool surface and bottom are lower than those ones in arc welding. This is main cause of formation of low dilution rate.
结果表明，熔池表面和底部的温度都低于电弧焊，这是造成低稀释率的根本原因；
The mechanism of High speed spin drawing for manufacturing copper inner fin tube is studied systematically, especially the process and parameters of inner fin formation arc analysed.
对内螺纹理片铜管的高速旋压拉伸成形加工机理进行了系统研究，分析了加工过程及参数。
The mechanism of High speed spin drawing for manufacturing copper inner fin tube is studied systematically, especially the process and parameters of inner fin formation arc analysed.
对内螺纹理片铜管的高速旋压拉伸成形加工机理进行了系统研究，分析了加工过程及参数。
应用推荐