At the same time, it is illuminated that element type, gridding partition and coupling manner used in ANSYS model can be used in calculation and analysis of steel bamboo composite structures.
同时也说明了本文中ANSYS建模时所采用的单元类型、网格划分、耦合方式均可以用于同类组合结构的计算和分析。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
本文基于ANSYS软件建立了车架结构的实体单元模型，对汽车车架结构进行静力和动力分析的研究。
The modelling method of applying ANSYS to match model parameter according to the testing data.
以实测动力特性参数为依据，应用ANSYS拟合模型参数的建模方法。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型，借助于大型有限元分析软件ANSYS进行了数值模拟。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
Utilized general FEM software ANSYS to establish mechanical model and solve.
并利用通用有限元软件ANSYS建立其力学模型并求解。
The FEM model of rapier loom frame is established with ANSYS software.
利用ANSYS软件建立了剑杆织机机架的有限元模型。
A model was built by using ANSYS to simulate the curing temperature field of two green tires, of which one was preheated and another was not.
采用ANSYS建立轮胎硫化温度场分析模型，对经过预热和未经预热处理两种情况下的胎坯硫化温度场进行了模拟。
A simulation of dynamic forces acting on invert prefabricates in TBM construction tunnel is made with surrounding rock-structure model by using ANSYS software.
运用计算软件ANSYS，采用围岩—结构模式，对TBM施工隧道仰拱预制块进行模拟动态施工的受力计算研究。
According to introduction of FE model of one bus body structure, the process of analyzing bus body structure based on ANSYS is illustrated in this paper.
通过介绍某型号大客车车身结构的有限元模型，阐述了利用ANSYS有限元软件对大客车车身结构分析的基本过程。
ANSYS software was employed to establish three-dimensional strip model of CCGA624 device and optimized simulation of soldered column dimension was also studied.
借助ANSYS有限元软件建立CCGA624器件的三维条状模型，基于应变对焊柱可靠性进行优化模拟分析。
Taking the spur gear as study object, this article introduces the method of establishing the parametric model in CATIA and transmitting it into ANSYS by graphic data transformation interface.
以直齿圆柱齿轮为研究对象，重点介绍了如何利用CATIA对其进行参数化建模及通过图形数据转换接口导入到ANSYS中建立有限元模型。
We had made numerical and modal analysis on the dynamic feature of F320 model derrick with ANSYS software and modal analysis technique.
使用ANSYS有限元软件、实验模态分析技术对F320型石油井架模型的动态特性进行了数值与试验分析。
With the FEA software ANSYS, the coupling model of coupling the pressure-prestress-heat stress flat container of three-layer is built using the physical environment approach.
本文运用ANSYS分析软件，利用物理环境分析法建立了三层套组合式扁挤压筒内压-预紧-热载荷耦合有限元模型。
The finite element model of underwater structure with shafting is built by ANSYS. The characteristics of structural acoustic radiation are investigated by the direct boundary element method.
使用ANSYS有限元软件建立带有推进轴系的潜艇尾部结构模型，用直接边界元方法进行潜艇尾部结构水下辐射噪声特性分析。
ANSYS is employed to model the semi-rigid concrete filled steel stub frame-shear wall structure.
使用ANSYS建立了半刚性连接钢管混凝土框剪结构的有限元模型。
Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.
首先利用平面框架结构的模型实验，借助有限元软件ANSYS，利用模态分析结果，实现了基于有限元理论的传感器优化布置。
This article analyzed the magnetic field forms using the FEA software ANSYS and established the mechanics model that shows torsion vibration after the metal belt receives the action of magnetic force.
本文利用ANSYS有限元分析软件，对磁场形态进行分析，并且建立了金属带受磁场力作用后扭转振动的力学模型。
To get numerical results, the general finite element program-ANSYS was employed to simulate model.
然后采用通用的有限元程序ANSYS模拟模型得到其数值解。
A boundary element model is established, making use of the ANSYS. In the noise simulation SYSNOISE is applied to get estimable simulation results of aircraft noise close to ground.
建立了某型军用飞机的ANSYS边界元模型，用声学有限元-边界元仿真软件SYSNOISE进行了噪声仿真，获得了飞机噪声在地面附近的辐射结果。
The optimization model and its interface with ANSYS are built.
构建了大型油船整体舱段结构优化模型；
After establishing FEM model of circular saw by using large-scale FEA software ANSYS, the static and dynamic property of it were analyzed.
本文应用通用有限元软件ANSYS建立了圆盘锯的有限元模型，对圆盘锯的固有特性和动态特性进行了理论分析。
The model is parameterized using APDL in ANSYS, the optimum structure of the spindle is designed, and the main structure parameters of the spindle are obtained.
在ANSYS中利用APDL语言实现主轴有限元模型的参数化，并对主轴的结构进行优化设计，求出了主轴优化后的主要结构参数。
The parametric finite element model (FEM) of wedged-ring joint structure was established using ANSYS parametric design language (APDL).
利用APDL语言对ANSYS软件进行二次开发，建立楔环连接结构的参数化有限元模型。
This paper optimized the principal axis of the earth auger by ANSYS, introduced the mathematic model and the steps of the optimization design.
用有限元分析软件ANSYS对挖坑机主轴进行优化设计，从理论上说明优化设计的数学模型，并给出具体的设计步骤。
Based on the universal finite element analysis software ANSYS, a spatial model of the bridge is built and the stress distribution under the live load on main sections is analyzed.
利用大型通用软件ANSYS建立结构空间有限元分析模型，分析活载作用下各控制截面的应力分布规律。
Designed model established by ANSYS program is used to analyze the loading behavior of the CFG pile composite foundation such as vertical displacement, stress and character of destructive capability.
利用ANSYS有限元程序建立模型，对CFG桩复合地基承载性状(竖向位移、应力分布、破坏特点等)进行了分析。
And import the model into the finite element analysis software of ANSYS for modal calculation and analysis.
进而将齿轮的参数化模型导入通用有限元分析软件ANSYS，对其模态进行计算分析。
And damage situation of cable-stayed cable is simulated by using RBF network based on finite element model in ANSYS.
基于ANSYS有限元模型，采用RBF网络，模拟了斜拉索的损伤情况。
And damage situation of cable-stayed cable is simulated by using RBF network based on finite element model in ANSYS.
基于ANSYS有限元模型，采用RBF网络，模拟了斜拉索的损伤情况。
应用推荐