Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型，借助于大型有限元分析软件ANSYS进行了数值模拟。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
结合大型有限元软件ANSYS，建立了筏形基础地基相互作用体系的全三维有限元模型。
Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.
首先利用平面框架结构的模型实验，借助有限元软件ANSYS，利用模态分析结果，实现了基于有限元理论的传感器优化布置。
Firstly, an FEM (Finite Element Method) numerical model of single magnetic unit is set up, then magnetic field distributions under different working conditions are solved by ANSYS software.
本文首先运用有限元方法对机器人爬行小车的履带磁吸附单元建立了数学模型，并通过ANSYS软件进行了磁场求解，得出不同运动情况下的磁场分布；
The finite element model of underwater structure with shafting is built by ANSYS. The characteristics of structural acoustic radiation are investigated by the direct boundary element method.
使用ANSYS有限元软件建立带有推进轴系的潜艇尾部结构模型，用直接边界元方法进行潜艇尾部结构水下辐射噪声特性分析。
Because the software of ANSYS has the characteristics such as model building simply, fast and conveniently, it becomes the representation of large universal finite element procedure.
ANSYS软件具有建模简单、快速、方便的特点，因而成为大型通用有限元程序的代表。
Because the software of ANSYS has the characteristics such as model building simply, fast and conveniently, it becomes the representative of large universal finite element procedure.
ANSYS软件具有建模简单、快速、方便的特点，因而成为大型通用有限元程序的代表。
A finite element(FE) model for a tripot universal joint is developed, and a FE analysis on the contact stresses in the parts of the joint under extreme torque is conducted using ANSYS software.
将轿车三枢轴式等速万向节的三维模型经过结构简化离散成有限元模型，并应用ANSYS软件对其承受极限转矩时的内部接触应力进行有限元分析。
The predicted critical buckling temperature and buckling modes for a simple model by using the beam elements are in good agreement with the finite shell element solution by ANSYS.
简单梁模型算例表明：该方法求得的各阶屈曲温度临界值和屈曲模态与AN SY S薄壳有限元解吻合较好；
At first this paper utilized the FEM software ANSYS to build the finite element model of the prototype bus body and carry on static calculation to examine the intensity of the bus body.
本文首先利用有限元分析软件ANSYS，建立原型车车身的有限元模型，进行静态计算检验车身强度。
The parametric finite element model (FEM) of wedged-ring joint structure was established using ANSYS parametric design language (APDL).
利用APDL语言对ANSYS软件进行二次开发，建立楔环连接结构的参数化有限元模型。
The finite element model of this sensor is built by applying the finite element analysis software ANSYS.
用有限元分析软件ANSYS建立了该传感器的有限元模型。
By using ANSYS as the software of finite element analysis, a model is set up for calculating finite element of pile foundation with lateral load.
运用ANSYS有限元分析软件，建立桩基在侧向荷载作用下的有限元计算模型。
The prediction model of temperature field in the process of wearing water-cooled of angle steel was set up using ANSYS finite element analysis software.
针对角钢穿水冷却过程，借助ANSYS有限元分析软件，建立角钢穿水冷却过程温度场的预报模型；
Using the powerful software ANSYS, the boundary condition and mechanical conditions of supporter was simulated, and a finite element analyzing mechanical model for supporter of rotary kiln was set up.
通过合理模拟回转窑托轮的边界条件和受力状况，并采用功能强大的ANSYS软件，建立了回转窑托轮的有限元分析力学模型。
To get numerical results, the general finite element program-ANSYS was employed to simulate model.
然后采用通用的有限元程序ANSYS模拟模型得到其数值解。
The test model and another model with the same span, span-height ratio, and sectional dimensions were analyzed using the finite element analysis software ANSYS.
同时利用有限元计算软件AN SY S对试验模型以及与试验模型相同跨度、跨高比和截面尺寸的门式刚架进行计算。
Considering the interface slip, a nonlinear finite element analysis model is established by using finite element analysis soft-ANSYS, and gained a reasonable shearing connection coefficient.
利用有限元分析软件ANSYS，对组合梁的交界面相对滑移性能进行了非线性有限元分析，提出剪力连接系数的合理范围。
Taking a marine stacker as model sample, the finite element model for frame construction is established by using ANSYS software and the results are analyzed.
以某船用巷道堆垛机为模型样本，以ANSYS软件为平台建立框架结构的有限元模型，并求解分析。
And import the model into the finite element analysis software of ANSYS for modal calculation and analysis.
进而将齿轮的参数化模型导入通用有限元分析软件ANSYS，对其模态进行计算分析。
The finite element model of the supporting parts of No. 2 kiln has been established in ANSYS, and the numerical calculation has been carried out.
结合Ansys有限元分析软件建立了回转窑支承组件的有限元分析模型，并对2号窑的支承组件进行了有限元数值计算。
The finite element analysis model to the U shape bellows is presented and calculated by the ANSYS program under diverse loads for in plane instability.
建立了U形无加强波纹管结构分析的有限元分析模型，采用ANSYS有限元软件对其在不同平面失稳工况下的应力响应进行了计算。
Based on the universal finite element analysis software ANSYS, a spatial model of the bridge is built and the stress distribution under the live load on main sections is analyzed.
利用大型通用软件ANSYS建立结构空间有限元分析模型，分析活载作用下各控制截面的应力分布规律。
Based on the theory of the unsteady temperature field and stress field, three-dimensional finite element model is set up. The wall is analyzed by program of ANSYS finite element analysis.
本文根据瞬态温度场和应力场理论，建立地下室混凝土墙体的三维有限元分析模型，利用有限元分析程序ANSYS对基本工况下的墙体进行分析。
Based on the Winkler theory, the finite element model for directly buried hot water heat-supply pipeline is founded by using ANSYS software, and the effect of soil on pipeline is simulated.
基于文克勒理论采用ANSYS软件建立了直埋热水供热管道的有限元模型，模拟了土壤对管道的作用。
In order to look for the reason of a main shaft sinkage in a heavy-duty horizontal lath, a finite element model for the lath's main shaft system is established based on ANSYS.
针对某重型卧式车床主轴下沉问题，基于Ansys软件对其主轴系建立了有限元模型，对主轴系静态性能进行了分析。
The method of the spherical gear parameter model building and its finite element analysis under the ANSYS circumstance is studied thoroughly.
研究基于ANSYS的球齿轮参数化模型生成技术及其有限元分析技术。
And damage situation of cable-stayed cable is simulated by using RBF network based on finite element model in ANSYS.
基于ANSYS有限元模型，采用RBF网络，模拟了斜拉索的损伤情况。
And damage situation of cable-stayed cable is simulated by using RBF network based on finite element model in ANSYS.
基于ANSYS有限元模型，采用RBF网络，模拟了斜拉索的损伤情况。
应用推荐