Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
The stator's characteristics of vibration and input impedance were analyzed by using the finite element software ANSYS. A new decoupling method between the two vibrators was presented.
对电机的运行机理进行了分析，并利用有限元软件ANSYS分析了电机定子的振动特性和阻抗特性，同时提出了一种振子间解耦的方法。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
On the base of introducing the principle of the magnetic flux leakage (MFL) detection, the finite element method based on ANSYS used to simulate and analyze the MFL signal is presented.
在介绍漏磁检测原理的基础上，详细论述了利用有限元法分析缺陷信号的方法以及利用ANSYS对漏磁信号的仿真过程和仿真结果，并对结果进行分析。
The finite element model of underwater structure with shafting is built by ANSYS. The characteristics of structural acoustic radiation are investigated by the direct boundary element method.
使用ANSYS有限元软件建立带有推进轴系的潜艇尾部结构模型，用直接边界元方法进行潜艇尾部结构水下辐射噪声特性分析。
Connecting the strength reduction of finite element method, the paper used the new criterion to analyze slope stability problems by importing it into ANSYS program.
本文将新准则引入到大型通用有限元程序ANSYS中，并与强度折减系数法相结合用于分析岩土工程中的边坡稳定问题。
The equivalent age method is extended successfully to the concrete cracking control in structures through the use of the finite element program ANSYS.
与有限元软件一起使用，等效龄期方法还可以运用于混凝土结构的温度裂缝预测与控制中；
By means of the finite element program ANSYS and using orthogonal design method, the parameters having effect on the stability of this structure were analyzed and primary factors were obtained.
本文利用ANSYS有限元程序通过正交设计的方法对格构式斜腿刚架进行了平面外整体稳定承载力参数分析，得到显著影响因素。
Lastly, the strength analysis of the guide frame, which is key part to link guide tire sets and vehicle body, is carried out by finite element method software (ANSYS).
最后利用有限元软件(ANSYS)对连接导向轮系和车身的关键部件——导向架进行应力强度分析。
The method of the spherical gear parameter model building and its finite element analysis under the ANSYS circumstance is studied thoroughly.
研究基于ANSYS的球齿轮参数化模型生成技术及其有限元分析技术。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
Furthermore, the method to analyze the damage of lining structure by current finite element software ANSYS is also valuable to other concrete structure and components.
文中论述的利用通用有限元软件ANSYS实现衬砌结构损伤分析的方法，对其它混凝土结构和构件的损伤分析也具有参考价值。
The traditional solid axis is improved to become hollow to lighten the machine's weight and interference joint of hollow axis has been the finite element method analysed by the ANSYS.
改进了传统的实心轴为空心轴使得设备重量减轻，并且利用ANSYS软件对空心轴的过盈配合进行了有限元分析。
General beam-column stiffness connections and the full-welded dog skeleton connection is analyzed and compared by Nonlinear finite element analysis method (ANSYS method) and draw some conclusions.
采用非线性有限元方法(ANSYS程序)分析普通梁柱刚性连接和全焊狗骨式连接并进行比较，可得出一些有益于工程的结论。
Then simulating calculation of profiles and soundings of the DC electro-exploring method are numerically carried out, supported by ANSYS that is a software based on the finite element analysis method.
先从理论上作了分析，然后利用ANSYS软件进行了直流电阻率剖面和电阻率测深法的模拟计算。
ANSYS, the software involves with finite element method, was adopted for solving the flow models and gaining results of the velocity flied, pressure filed, and viscosity field.
应用ANSYS软件进行有限元求解，得到螺纹流道的速度场、压力场、粘度场。
Besides that, on the basis of studying the elastic and plastic finite element method and mechanics knowledge, the paper analyze a steel continuous beam by the large analysis software ANSYS.
另外在研究弹塑性有限元法和力学知识基础上，利用大型有限元分析软件ANSYS对连续钢梁进行弹塑性分析，使塑性设计法的理论依据得以验证，并使认识更为直观。
This article uses the ANSYS software and analysis design method to make a detailed finite element stress analysis of the head of valve body where placed the quarter rings.
利用ANSYS软件及其分析设计方法，对阀体中腔安装四合环的位置进行了有限元应力分析。
Numerical simulation of finite element method for pile-bucket foundation under uplifting load were conducted by making use of ANSYS software.
通过使用ANSYS软件，对桩-桶基础上拔试验进行有限元数值模拟。
Secondly:the thought of finite element analysis and the method using software named ANSYS are introduced.
其次：介绍有限元分析思想和模拟软件ANSYS的使用。
The value and trend of finite element analysis method and analytical method are consistent, This can prove that the model of hydraulic cylinder is right in ANSYS.
基于有限元数值模拟结果与解析计算结果在数值和变化趋势上均趋于一致，充分地证明了建模的正确性。
Based on these equations, continuous induction heat treatment of the thick wall tube, including heating, quenching and tempering, is simulated by finite element method on ANSYS software.
基于这些方程在ANSYS软件上实现了对厚壁筒形工件连续感应热处理的计算机模拟计算。
Study method is to adopt ANSYS-international large-scale general-purpose finite element software to realize the simulation calculation of the RCC thermal stress for Aggregate linear expansion.
在研究方法上采用国际大型通用有限元软件ANSYS建模来实现混凝土骨料线膨胀对碾压混凝土温度应力的仿真计算。
With the help of ANSYS system, it mainly deals with the modeling of a multi-stage gear rotor system with finite element method and analyzing the vibration modes of the system.
利用有限元应用软件ANSYS建立了齿轮转子系统耦合振动分析的有限元计算模型。
The process of transverse low-speed impact of composite laminated plate was simulated by using finite element soft package ANSYS and method of transient analysis.
采用ANSYS有限元程序对复合材料层合板横向低速冲击进行模拟，采用瞬态分析方法来研究层合板的冲击与损伤过程。
Authors presented a finite element (FE) model and frequency analysis method for analyzing 3-d full-mode flutter of long-span Bridges using ANSYS software.
提出了一种在ANSYS中直接分析大跨桥梁三维全模态颤振的有限元模型和频域方法。
Authors presented a finite element (FE) model and frequency analysis method for analyzing 3-d full-mode flutter of long-span Bridges using ANSYS software.
提出了一种在ANSYS中直接分析大跨桥梁三维全模态颤振的有限元模型和频域方法。
应用推荐