Using modal and spectral analysis in ANSYS dynamic analysis, earthquake resistance analysis has been performed on 3d model of steel platform of air-cooling island in thermal power plant.
利用ANSYS软件动力分析功能中的模态分析和谱分析功能对火电厂空冷岛钢结构平台的三维模型进行地震波作用下的抗震分析。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
本文基于ANSYS软件建立了车架结构的实体单元模型，对汽车车架结构进行静力和动力分析的研究。
Besides, ANSYS is a large general-purpose software, which can be used to analyze static, dynamic, harmonic response and transient dynamic analysis of the machine tool.
ANSYS软件是一种大型通用的有限元分析软件，可以准确的进行机床的静力、模态、谐响应以及瞬态动力学的有限元分析。
Dynamic character of oil testing pipe shock absorber system under impact load were searched which were based on finite element analysis software ANSYS in this paper.
本文基于有限元分析软件ANSYS研究冲击载荷下石油测试管柱减振系统的动力学性质。
The dynamic characteristics and seismic response spectrum analysis of reinforced concrete frames with specially-shaped columns are discussed by using the general structural analysis software ANSYS.
运用有限元软件ANSYS，对大开间钢筋混凝土异形柱框架进行了动力特性和地震反应谱分析。
Through bidirectional data interchange between ADAMS and ANSYS, dynamic stress analysis of this elastic mechanism is conducted.
通过进行ADAMS与ANSYS之间的双向数据交换，对该喷管弹性机构构件进行了动态应力分析。
Modal analysis with ANSYS software was proceeded to coMPare the dynamic performance of the self-anchored suspension bridge to a similar earth-anchored suspension bridge.
采用ANSYS进行模态分析，比较独塔自锚式悬索桥及相应的地锚式悬索桥动力特性的异同。
We had made numerical and modal analysis on the dynamic feature of F320 model derrick with ANSYS software and modal analysis technique.
使用ANSYS有限元软件、实验模态分析技术对F320型石油井架模型的动态特性进行了数值与试验分析。
Two load-solution methods were expounded, which had an extensive significance and provided a reference for dynamic thermal analysis with a moving heat source, and for the second development of ANSYS.
阐述了两种具有普遍意义的加载求解方法，为热源移动的动态热分析和ANSYS的二次开发提供了参考。
While apply the technique of meshing clearance to the back push type sabot and front push type sabot, we have provided a transient dynamic analysis of this method using ANSYS.
在后推式弹托与前推式弹托上应用了啮合间隙技术，用ANSYS对其进行了瞬态动力学分析。
Based on practical experience, the paper summarizes such problems as transient dynamic analysis, mode analysis and spectrum analysis and their solutions to be used by ANSYS engineers for reference.
结合使用经验，总结了基于通用有限元软件ANSYS进行瞬态动力分析、模态分析、谱分析等动力分析的有关问题及解决方法，可供使用ANSYS的工程技术人员参考。
Transient dynamic analysis for the cutting part of shearer by finite element software ANSYS has been made, the law of vibration displacement is studied from the perspective of time response.
利用ANSYS有限元软件对采煤机截割部进行了瞬态动力学分析，从时间响应的角度研究振动位移规律。
Therefore, based on rolling bearing implicit finite element solution analysis, using ANSYS/LS-DYNA explicit dynamic module implements, we achieved the rolling contact simulation of motion process.
因此本文在对滚动轴承有限元隐式求解分析的基础上，利用ANSYS/LS-DYNA模块对滚动轴承进行了显式动力学接触分析。
Based on a practical project, this article studied the dynamic characteristics of the cooperation, using finite element analysis software ANSYS.
本文以实际工程项目为背景，利用大型有限元分析软件ANSYS，研究动力基础与地基协同工作的动力特性。
We have executed static analysis, model analysis and dynamic analysis on the exhaust valve in one cycle of the engine, basing on the model we founded and the finite element analysis software of ANSYS.
基于所建立的模型和ANSYS软件平台对以上的结果进行分析，分别对气门进行静力学分析、模态分析和气门一个运转周期内的瞬态动力学分析。
This paper uses large-scale finite element software ANSYS to make finite element analysis, receives dynamic characteristics and seismic response of the Mega-frame structure.
本文采用大型有限元软件ANSYS，对巨型框架结构进行有限元分析，得到结构体系的动力特性和地震响应。
Then validity of the dynamic model was illustrated by comparison with the results of the modal analysis by ANSYS software.
利用ANSYS商用软件进行主动隔振单元的模态分析，对比结果验证了该动力学模型的正确性。
It was effective and feasible to utilize ANSYS software to imitated analysis although dynamic response to the slope blasting excavation was extremely complicated.
边坡爆破开挖的动力响应极其复杂，利用ANSYS进行模拟分析是有效可行的。
Then dynamic response of the enclosure structure is studied with the function of ANSYS for modal analysis, random vibration (PSD) analysis and transient analysis.
利用有限元对机柜分别进行了模态分析、随机振动分析和瞬态动力响应行为的分析和研究。
The ANSYS software is suitable for the dynamic-analysis and fatigue analysis of offshore platform, and it is an effective tool in the platform design.
ANSYS有限元软件可以方便地计算平台结构在波浪、海流载荷下的动力响应和疲劳寿命，是进行平台设计和校核的有效工具。
Physical model of misaligned optical system under interference vibration was developed based on ANSYS and the dynamic response of the reflector was obtained by transient dynamic analysis.
本文建立了基于ANSYS有限元分析软件的光学振动失调物理模型，通过瞬态动力学分析得到了反射镜在振动激励下的位移响应。
Dynamic mechanical characteristics of 3d woven composite beams are studied by means of the software of ANSYS and the experimental modal analysis technique.
采用有限元分析软件ANSYS分析了三维机织复合材料悬臂板的动态力学性能，预测了其固有频率和振型。
Dynamic mechanical characteristics of 3d woven composite beams are studied by means of the software of ANSYS and the experimental modal analysis technique.
采用有限元分析软件ANSYS分析了三维机织复合材料悬臂板的动态力学性能，预测了其固有频率和振型。
应用推荐