As they do so, the electrons that were paired with them in the anode during the charging process are released. These electrons power an external circuit.
电池放电时，正极释放出的锂离子快速运动回到负极，充电过程中在负极由锂离子携带的电子被释放出来，从而为外部电路提供电力。
Electrolysis: make the current through the electrolyte solution at the anode and cathode cause REDOX reaction process.
电解：使电流通过电解质溶液而在阳极，阴极引起氧化还原反应的过程。
The anode and cathode materials, electrolyte and its additives, structure of battery and manufacture process had important effect on the safety of Li-ion battery.
正负极材料、电解液及其添加剂、电池的结构以及制备工艺条件都对锂离子电池的安全性有重要的影响。
Electric lift oil: containing alkali solution in to parts used as an anode or the cathode, in the current function, remove the process of surface oil parts.
电解除油：在含碱溶液中，以制件作为阳极或阴极，在电流作用下，清除制件表面油污的过程。
With the increase of carbon anode scale, the production process raises a higher request to automatic control.
随着炭阳极生产规模的不断扩大，对生产工艺自动化控制提出了更高的要求。
In a word, with anode solution as raw material, production of high-purity manganese carbonate is feasible in technicality, reasonable in process and considerable in economic benefit.
总之，以电解锰的阳极液为原料，生产高纯碳酸锰在技术上是可行的，工艺上是合理的，经济效益是可观的。
The phenomenon that the crack defect at jaw hole during baking process of carbon anode vertically charged in baker causes the defective index of carbon anode rise.
在焙烧过程中，竖装阳极出现爪孔缺陷的现象是导致阳极生产废品率增多及成本居高不下的一个很重要原因。
The Ti-Ru anode voltage was measured during the electrolytic process.
测量了电解过程中钛涂钌电极的阳极电位。
The paper relates the process flow to recover gold from copper anode slime, and points out the main factors influencing gold recovery rate.
介绍了从铜阳极泥中回收金的工艺流程，指出了影响金回收率的主要因素。
Fine coke formula can enhance compactness of baked carbon anode and mechanical strength, which is in favor of formula process improvement.
细颗粒配方能增加炭素焙烧阳极致密性、利于提高其机械强度，对改进配方工艺具有积极意义。
A process of electrolytic synthesis of sodium perchlorate from sodium chlorate solution by lead dioxide anode based titanium metal is introduced.
介绍了以钛基体二氧化铅作为阳极，电解氯酸钠合成高氯酸钠的过程。
This paper introduces mainly to a process of treating Sb-rich lead anode slime by vacumm volatilization. The factors influencing volatilization rate of antimony are probed in.
主要介绍了利用真空挥发对高锑铅阳极泥进行处理的新工艺试验研究结果，并对影响挥发率的各种因素进行了讨论。
Passing a current between them was intended to force water to migrate through the soil from the anode to the cathode, further away from the tower, by a process that is still not fully understood.
使电流通过它们是企图通过一种至今仍不能完全理解的过程迫使水分从正极向负极流动，使水远离塔身。
The harmfulness caused by corrosion of metal anode in electro-coating process was expounded. Corrosion reasons of anode were analysed and its protection methods were explored.
阐述了在阴极电泳涂装过程中金属阳极因腐蚀产生的危害，分析探讨了阳极的腐蚀原因及其防护方法。
A method for treating all types of lithium anode batteries and cells via a hydrometallurgical process at room temperature.
一种在室温下经过湿法冶金工艺处理所有类型的锂阳极电池组和电池的方法。
The ultrasonic technics was applied to anode oxidation of aluminum. The influences of ultrasonic on anode oxidation curves, electrolytic process parameters and oxide film's morphology were studied.
将超声波应用于铝的阳极氧化处理，研究了超声波对阳极氧化特性曲线、电解工艺参数和膜层形貌的影响。
A kind of simple and practical anode with square window format for Cr plating was designed. The anode can satisfy the special requirements of Cr plating process.
设计出一种简单实用的、符合镀铬工艺特殊要求的窗格式镀铬阳极。
The consumption of the graphite anode in the calcium molten salt electrolysis process is analyzed, which includes oxidation consumption and physics damage.
分析了钙熔盐电解过程石墨阳极消耗的两个因素 ，即主要有氧化消耗和物理破损 。
A mathematical model of the horizontal anode baking process has been developed. The predicted results obtained are consistent and in good agreement with experimental results reported elsewhere.
建立了敞开式阳极焙烧炉热工过程的数学模型，该模型用于预测焙烧炉的热力行为是满意的。
The invention provides a novel method for recycling waste sulfuric acid in the oxidation process of hard anode using ammonium sulfate at low temperature.
本发明提供了一种在低温条件下，采用硫酸铵回收硬质阳极氧化过程中废硫酸的新方法。
Based on the process of electric field analysis and optimum design, the shape of the conformal anode used in electrodeposition is designed by the use of the FEM software, ANSYS.
利用ANSYS有限元软件，通过电场分析和优化设计，对电沉积技术中所用的象形阳极进行了形状设计。
The electrostatic precipitation electrostatic agglomeration process is used for purifying the harmful gas and smoke dust from an aluminum cell of self baked anode.
应用电除尘与静电凝聚技术相结合，净化自焙阳极铝电解槽生产过程中所产生的有害气体和烟尘。
The electrolytic cell is the main production equipment in the aluminum production process, and it is also the main object of analysis and monitoring to the anode effect prediction system.
在铝电解的生产过程中，电解槽是最主要的生产设备，也是铝电解故障预测系统的主要分析和监控的对象。
Using alloy as anode may be recommended as a technique for the synthesis of alkoxides, this process can run in sufficiently high current efficiency and high reaction activity.
采用合金电极，可以有效克服不溶性金属醇盐在阳极的吸附问题，并同时合成几种金属醇盐，从而提高反应的电流效率。
In the electroforming process, the anode electrode shape and position determine the current density distribution on the cathode and so the distribution and properties of the deposited metal.
电铸阳极的形状和位置决定了阴极表面电流密度的分布，并最终影响金属沉积层分布的均匀性及其材料性能。
Through the systematic analysis of ring anode baking process, a mathematical model was developed. Several simulation runs were then made.
通过对环式阳极焙烧炉的热工过程进行系统理论分析，建立了焙烧炉热工过程的数学模型。
Mixed metal oxide (MMO) coated titanium anode was prepared by thermal decomposition process.
采用热分解方法制备了混合金属氧化物(MO)层钛阳极。
Mixed metal oxide (MMO) coated titanium anode was prepared by thermal decomposition process.
采用热分解方法制备了混合金属氧化物(MO)层钛阳极。
应用推荐