This paper proposes (develops, extends) a new approach for the analysis of tolerance.
本文提出了一种分析容错的新方法。
This article is mainly at theory analysis of tolerance & fit in high-accuracy mechanical part design.
本文主要分析机械零配件的设计及高精度机械结构的公差与配合理论分析。
Among them the automatic generation of dimension chain is the foundation of CAT and the described design function offers basis of tolerance analysis and tolerance synthesis.
其中尺寸链自动生成是进行计算机辅助公差设计的基础，它所描述的设计函数是进行公差分析和公差综合的依据。
The results indicate that the damage tolerance behavior of composite laminates can be taken fully by taking the impact threats into consideration in the reliability analysis.
研究表明，通过在可靠性分析中引入了冲击威胁的概念，可以较充分地发挥复合材料层压板的损伤容限性能。
The assembly tolerance analysis and optimization method based on digital product design model is put forward according to the analysis of digitalization preassembly method.
通过对数字化预装配方法的分析，提出了基于数字化产品设计模型的装配公差分析和优化方法。
The method effectively solves the problem of the tolerance automatic analysis of the nonlinear system whose state changes greatly.
这种方法较好地解决了在状态变化大的非线性系统中进行容差自动化分析的问题。
The guarantee of the structural safety through damage tolerance analysis has focused the attention on quantifying the capability of NDT systems.
通过损伤容限分析保证结构安全可靠的着重点在NDT系统能力的定量表征。
The works in this dissertation focused on the study on the existed methods of tolerance analysis and design. Moreover, design centering also was a part content of the dissertation.
本文主要研究了现有的一些容差分析和设计的方法，同时也对参数的中心设计进行了较为细致的研究。
At least 3 years of product design experience such as Good Drawing Office practices, Tolerance Analysis, design For Assembly, Failure Mode and Effect Analysis (FMEA).
至少3年的产品设计经验，如良好的绘图方法，公差分析，装配设计，失效模式与效应分析(FMEA)。
In tolerance analysis, tolerance design or parameters design, it is required to approximate the feasible region of parameters, or to estimate the yield of product.
在容差分析、设计和参数中心设计中，一般需要对参数可行域进行近似，或是知道容差已知情况下的产品的合格率。
Two dimensions of uncertainty orientation of college students are found: tolerance and finding novelty, and the same of uncertainty response: comfort and resolve, after factor analysis.
采用因素分析的方法得到大学生不确定倾向有两个维度：容忍和求新，不确定反应有两个维度：舒适和解决。
A good mechanics analysis approach was presented for reliability analysis and damage tolerance design of aerofoil structure.
为机翼结构的可靠性分析和损伤容限设计提供了比较有价值的力学分析手段。
Design of optical lens and tolerance analysis, Research and optical measurement scheme is put forward and select plastic material.
设计光学镜头并进行公差分析，研究并提出光学测量方案，选择塑胶材料。
The software of calculation is developed by the method of sensitivity tolerance analysis. The effect of tolerance of composing loop on tolerance of close loop is analyzed quantitatively.
采用灵敏度公差分析方法开发出相应的计算软件，定量分析了组成环公差对封闭环公差的影响程度。
A group of equations of assembly datum variation is proposed to model assembly tolerance chain and tri-dimensional tolerance analysis result is obtained through solving those equations.
提出用装配基准变动方程组来建立装配公差链模型，通过求解此方程组获得三维装配公差链的分析结果。
Tolerance analysis is investigated under an environment of concurrent design in order to lead to optimized tolerance, as traditional tolerance analysis is often inefficient and liable to mistakes.
研究了并行设计环境下的公差分析以改善传统公差分析效率低且易出错的现状，获得了优化的公差。
A method of tolerance analysis and optimization design is investigated. The main key techniques of tolerance analysis and design of the servo mechanism of the guidance head is analyzed.
研究了公差分析与优化设计的方法，分析了导引头伺服机构公差分析与设计的主要关键技术。
The techniques of tolerance analysis are comprehensively discussed according to the linearity or non - linearity of the tolerance design function.
根据公差设计函数的特点，对公差分析技术进行了系统的论述。
The method for analysis and comparison of level of the standard gauge tolerance for normal products of the cold rolled steel sheets is put up.
提出了一种冷轧薄钢板常用产品标准厚度公差水平进行分析比较的方法。
Statistic analysis of electronic circuit has a practical guidance significance on tolerance selection of electronic components, forecast of qualified products ratio and costs of production.
电子电路的统计分析在电子产品批量生产前对产品元器件容差的选取、产品成品率和生产成本预测上有很好的指导意义。
While there is the analysis of node tolerance with parameter equation on approaching along a straight line with equal step.
同时，对具有参数方程形式表示的非圆曲线进行了等间距直线逼近的节点误差分析。
The basic task of the structure limit analysis is to calculate the structure bearing capacity, which provides the essential, reliable basis for the determination of structure safety tolerance.
获得结构极限承载能力是结构极限分析的基本任务，它为确定结构的安全度提供了必要的可靠依据。
The automatic analysis of the system's tolerance is performed by means of the iterative seeking method.
利用所提出的迭代搜索法，进行了系统容差自动分析。
A new method for damage tolerance analysis of three dimensional component under temperature and centrifugal loads is proposed in this paper.
本文提出温度及离心载荷作用下三维构件损伤容限分析方法。
A general count model of locating tolerance analysis and calculation was established in the process of exploiting fixture CAD system.
在夹具CAD系统开发过程中，建立了定位误差分析计算的通用求解模型。
Representation of tolerances is a basis for tolerance analysis and synthesis. Proposes a computer-aided representation method to represent geometric tolerances.
公差的存储表示是公差分析和公差综合的基础，提出一种几何公差的计算机辅助表示方法。
Tolerance analysis is a basis of reliable design. And fault diagnosis is a basic method to maintain the product.
容差分析是可靠性设计的基础，故障诊断是维持产品可靠性的基本方法。
Principal component analysis showed that O. lubricum had a stronger capability of O3 stress tolerance, as compared to Ph. edulis.
主成分分析表明，四季竹对O3胁迫的耐受能力明显强于毛竹。
Principal component analysis showed that O. lubricum had a stronger capability of O3 stress tolerance, as compared to Ph. edulis.
主成分分析表明，四季竹对O3胁迫的耐受能力明显强于毛竹。
应用推荐